[PATCH] gma500: Make VGA and HDMI connector hotpluggable

[Patrik Jakobsson]

On Sun, Mar 31, 2013 at 1:38 PM, Kero <kero at chello.nl> wrote:
> From: Kero van Gelder <kero at chello.nl>
>
> Both VGA and HDMI connectors are available on my Asus EeePC X101CH.
> This patch will cause output to be shown on either when plugged in.
> For both, it shows the leftmost 800x600, of the 1024x600 on LVDS.
>
> Signed-off-by: Kero van Gelder <kero at chello.nl>
> ---
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_crt.c b/drivers/gpu/drm/gma500/cdv_intel_crt.c
> index 8c17534..7b8386f 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_crt.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_crt.c
> @@ -276,6 +276,7 @@ void cdv_intel_crt_init(struct drm_device *dev,
>                 goto failed_connector;
>
>         connector = &psb_intel_connector->base;
> +       connector->polled = DRM_CONNECTOR_POLL_HPD;
>         drm_connector_init(dev, connector,
>                 &cdv_intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
>
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
> index e223b50..464153d 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_hdmi.c
> @@ -319,6 +319,7 @@ void cdv_hdmi_init(struct drm_device *dev,
>                 goto err_priv;
>
>         connector = &psb_intel_connector->base;
> +       connector->polled = DRM_CONNECTOR_POLL_HPD;
>         encoder = &psb_intel_encoder->base;
>         drm_connector_init(dev, connector,
>                            &cdv_hdmi_connector_funcs,
> --

Your patch has been applied to:
https://github.com/patjak/drm-gma500.git gma500-next

We might also consider polling if this causes problems for people, but for now
this is fine. No biggie, but your tabs where converted to spaces so I recommend
running checkpatch.pl before submitting.

Thanks
Patrik Jakobsson