[PATCH 1/3] drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.

Mathieu Larouche mathieu.larouche at matrox.com
Fri Apr 5 09:38:13 PDT 2013


On 05/04/2013 10:51 AM, Christopher Harvey wrote:
> This change properly enables the "requester" in G200ER cards that is
> responsible for getting pixels out of memory and clocking them out to
> the screen.
>
> Signed-off-by: Christopher Harvey <charvey at matrox.com>

Signed-off-by: Mathieu Larouche <mathieu.larouche at matrox.com>

> ---
>   drivers/gpu/drm/mgag200/mgag200_mode.c | 13 +++----------
>   1 file changed, 3 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
> index 7337013..f988965 100644
> --- a/drivers/gpu/drm/mgag200/mgag200_mode.c
> +++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
> @@ -751,8 +751,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
>   	int i;
>   	unsigned char misc = 0;
>   	unsigned char ext_vga[6];
> -	unsigned char ext_vga_index24;
> -	unsigned char dac_index90 = 0;
>   	u8 bppshift;
>   
>   	static unsigned char dacvalue[] = {
> @@ -803,7 +801,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
>   		option2 = 0x0000b000;
>   		break;
>   	case G200_ER:
> -		dac_index90 = 0;
>   		break;
>   	}
>   
> @@ -852,10 +849,8 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
>   		WREG_DAC(i, dacvalue[i]);
>   	}
>   
> -	if (mdev->type == G200_ER) {
> -		WREG_DAC(0x90, dac_index90);
> -	}
> -
> +	if (mdev->type == G200_ER)
> +		WREG_DAC(0x90, 0);
>   
>   	if (option)
>   		pci_write_config_dword(dev->pdev, PCI_MGA_OPTION, option);
> @@ -952,8 +947,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
>   	if (mdev->type == G200_WB)
>   		ext_vga[1] |= 0x88;
>   
> -	ext_vga_index24 = 0x05;
> -
>   	/* Set pixel clocks */
>   	misc = 0x2d;
>   	WREG8(MGA_MISC_OUT, misc);
> @@ -965,7 +958,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,
>   	}
>   
>   	if (mdev->type == G200_ER)
> -		WREG_ECRT(24, ext_vga_index24);
> +		WREG_ECRT(0x24, 0x5);
>   
>   	if (mdev->type == G200_EV) {
>   		WREG_ECRT(6, 0);

-- 
Mathieu Larouche Ing./Eng.
Software Designer
Matrox Graphics Inc.
Phone : 514 822-6000 x7905
Email : mathieu.larouche at matrox.com



More information about the dri-devel mailing list