[PATCH] drm: Don't generate invalid AVI infoframes for CEA modes

[Ville Syrjälä]

On Mon, Aug 05, 2013 at 02:36:47PM +0100, Damien Lespiau wrote:
> >From CEA-861:
> 
>   Data Byte 1, bit A0 indicates whether Active Format Data is present in
>   Data Byte 2 bits R3 through R0. A source device shall set A0=1 when
>   any of the AFD bits are set.
> 
> ie. if we want to set active_aspect, we need to set the
> active_info_valid bit to 1 as well.
> 
> Cc: Thierry Reding <thierry.reding at avionic-design.de>
> Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 95d6f4b..8d1139f 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -3107,6 +3107,7 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
>  		return 0;

Nothing to do with this patch, but I just spotted this return here. So
we're not populating the aspect ratio stuff if VIC=0. Doesn't really
make sense to me. Who will tell me what this is trying to achieve?

>  
>  	frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
> +	frame->active_info_valid = 1;
>  	frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
>  
>  	return 0;
> -- 
> 1.8.3.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC