[PATCH v3] drm/exynos: Add fallback option to get non physically continous memory for fb
Sylwester Nawrocki
s.nawrocki at samsung.com
Tue Aug 6 01:39:24 PDT 2013
Vikas,
On 08/06/2013 07:23 AM, Vikas Sajjan wrote:
> While trying to get boot-logo up on exynos5420 SMDK which has eDP panel
> connected with resolution 2560x1600, following error occured even with
> IOMMU enabled:
> [0.880000] [drm:lowlevel_buffer_allocate] *ERROR* failed to allocate buffer.
> [0.890000] [drm] Initialized exynos 1.0.0 20110530 on minor 0
>
> To address the cases where physically continous memory MAY NOT be a
> mandatory requirement for fb, the patch adds a feature to get non physically
> continous memory for fb if IOMMU is supported and if CONTIG memory allocation
> fails.
>
> Signed-off-by: Vikas Sajjan <vikas.sajjan at linaro.org>
> Signed-off-by: Arun Kumar <arun.kk at samsung.com>
> Reviewed-by: Rob Clark <robdclark at gmail.com>
> ---
> changes since v2:
> - addressed comments given by Tomasz Figa <tomasz.figa at gmail.com>.
>
> changes since v1:
> - Modified to add the fallback patch if CONTIG alloc fails as suggested
> by Rob Clark robdclark at gmail.com and Tomasz Figa <tomasz.figa at gmail.com>.
>
> - changed the commit message.
> ---
> drivers/gpu/drm/exynos/exynos_drm_fbdev.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> index 8e60bd6..faec77e 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c
> @@ -16,6 +16,7 @@
> #include <drm/drm_crtc.h>
> #include <drm/drm_fb_helper.h>
> #include <drm/drm_crtc_helper.h>
> +#include <drm/exynos_drm.h>
>
> #include "exynos_drm_drv.h"
> #include "exynos_drm_fb.h"
> @@ -165,8 +166,17 @@ static int exynos_drm_fbdev_create(struct drm_fb_helper *helper,
>
> size = mode_cmd.pitches[0] * mode_cmd.height;
>
> - /* 0 means to allocate physically continuous memory */
> - exynos_gem_obj = exynos_drm_gem_create(dev, 0, size);
> + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_CONTIG, size);
> + /*
> + * If IOMMU is supported then try to get buffer from non physically
> + * continous memory area.
s/continous/continuous
or better
s/continous/contiguous
Otherwise the patch looks good. But please note it has nothing to do
with linux-media at vger.kernel.org, please drop this mailing list from
Cc as I need to be constantly marking those patches as Non applicable
in the patchwork.
Thanks!
Sylwester
> + */
> + if (IS_ERR(exynos_gem_obj) && is_drm_iommu_supported(dev)) {
> + dev_warn(&pdev->dev, "contiguous FB allocation failed, falling back to non-contiguous\n");
> + exynos_gem_obj = exynos_drm_gem_create(dev, EXYNOS_BO_NONCONTIG,
> + size);
> + }
> +
> if (IS_ERR(exynos_gem_obj)) {
> ret = PTR_ERR(exynos_gem_obj);
> goto err_release_framebuffer;
More information about the dri-devel
mailing list