[PATCH 3/9] drm/omap: use flip-work helper
Rob Clark
robdclark at gmail.com
Wed Aug 7 10:41:21 PDT 2013
And simplify how we hold a ref+pin to what is being scanned out by using
fb refcnt'ing. The previous logic pre-dated fb refcnt, and as a result
was less straightforward than it could have been. By holding a ref to
the fb, we don't have to care about how many plane's there are and
holding a ref to each color plane's bo.
Signed-off-by: Rob Clark <robdclark at gmail.com>
---
drivers/gpu/drm/omapdrm/omap_drv.h | 5 +--
drivers/gpu/drm/omapdrm/omap_fb.c | 74 +++++++++++++++++-------------------
drivers/gpu/drm/omapdrm/omap_plane.c | 51 +++++++++++--------------
3 files changed, 58 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 14f17da..29ac584 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -203,9 +203,8 @@ struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos);
struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p);
-int omap_framebuffer_replace(struct drm_framebuffer *a,
- struct drm_framebuffer *b, void *arg,
- void (*unpin)(void *arg, struct drm_gem_object *bo));
+int omap_framebuffer_pin(struct drm_framebuffer *fb);
+int omap_framebuffer_unpin(struct drm_framebuffer *fb);
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
struct omap_drm_window *win, struct omap_overlay_info *info);
struct drm_connector *omap_framebuffer_get_next_connector(
diff --git a/drivers/gpu/drm/omapdrm/omap_fb.c b/drivers/gpu/drm/omapdrm/omap_fb.c
index 8031402..f2b8f06 100644
--- a/drivers/gpu/drm/omapdrm/omap_fb.c
+++ b/drivers/gpu/drm/omapdrm/omap_fb.c
@@ -237,55 +237,49 @@ void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
}
}
-/* Call for unpin 'a' (if not NULL), and pin 'b' (if not NULL). Although
- * buffers to unpin are just pushed to the unpin fifo so that the
- * caller can defer unpin until vblank.
- *
- * Note if this fails (ie. something went very wrong!), all buffers are
- * unpinned, and the caller disables the overlay. We could have tried
- * to revert back to the previous set of pinned buffers but if things are
- * hosed there is no guarantee that would succeed.
- */
-int omap_framebuffer_replace(struct drm_framebuffer *a,
- struct drm_framebuffer *b, void *arg,
- void (*unpin)(void *arg, struct drm_gem_object *bo))
+/* pin, prepare for scanout: */
+int omap_framebuffer_pin(struct drm_framebuffer *fb)
{
- int ret = 0, i, na, nb;
- struct omap_framebuffer *ofba = to_omap_framebuffer(a);
- struct omap_framebuffer *ofbb = to_omap_framebuffer(b);
- uint32_t pinned_mask = 0;
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ int ret, i, n = drm_format_num_planes(fb->pixel_format);
- na = a ? drm_format_num_planes(a->pixel_format) : 0;
- nb = b ? drm_format_num_planes(b->pixel_format) : 0;
+ for (i = 0; i < n; i++) {
+ struct plane *plane = &omap_fb->planes[i];
+ ret = omap_gem_get_paddr(plane->bo, &plane->paddr, true);
+ if (ret)
+ goto fail;
+ omap_gem_dma_sync(plane->bo, DMA_TO_DEVICE);
+ }
- for (i = 0; i < max(na, nb); i++) {
- struct plane *pa, *pb;
+ return 0;
- pa = (i < na) ? &ofba->planes[i] : NULL;
- pb = (i < nb) ? &ofbb->planes[i] : NULL;
+fail:
+ for (i--; i >= 0; i--) {
+ struct plane *plane = &omap_fb->planes[i];
+ omap_gem_put_paddr(plane->bo);
+ plane->paddr = 0;
+ }
- if (pa)
- unpin(arg, pa->bo);
+ return ret;
+}
- if (pb && !ret) {
- ret = omap_gem_get_paddr(pb->bo, &pb->paddr, true);
- if (!ret) {
- omap_gem_dma_sync(pb->bo, DMA_TO_DEVICE);
- pinned_mask |= (1 << i);
- }
- }
- }
+/* unpin, no longer being scanned out: */
+int omap_framebuffer_unpin(struct drm_framebuffer *fb)
+{
+ struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
+ int ret, i, n = drm_format_num_planes(fb->pixel_format);
- if (ret) {
- /* something went wrong.. unpin what has been pinned */
- for (i = 0; i < nb; i++) {
- if (pinned_mask & (1 << i)) {
- struct plane *pb = &ofba->planes[i];
- unpin(arg, pb->bo);
- }
- }
+ for (i = 0; i < n; i++) {
+ struct plane *plane = &omap_fb->planes[i];
+ ret = omap_gem_put_paddr(plane->bo);
+ if (ret)
+ goto fail;
+ plane->paddr = 0;
}
+ return 0;
+
+fail:
return ret;
}
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 8d225d7..046d5e6 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -17,7 +17,7 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <linux/kfifo.h>
+#include "drm_flip_work.h"
#include "omap_drv.h"
#include "omap_dmm_tiler.h"
@@ -58,26 +58,23 @@ struct omap_plane {
struct omap_drm_irq error_irq;
- /* set of bo's pending unpin until next post_apply() */
- DECLARE_KFIFO_PTR(unpin_fifo, struct drm_gem_object *);
+ /* for deferring bo unpin's until next post_apply(): */
+ struct drm_flip_work unpin_work;
// XXX maybe get rid of this and handle vblank in crtc too?
struct callback apply_done_cb;
};
-static void unpin(void *arg, struct drm_gem_object *bo)
+static void unpin_worker(struct drm_flip_work *work, void *val)
{
- struct drm_plane *plane = arg;
- struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_plane *omap_plane =
+ container_of(work, struct omap_plane, unpin_work);
+ struct drm_device *dev = omap_plane->base.dev;
- if (kfifo_put(&omap_plane->unpin_fifo,
- (const struct drm_gem_object **)&bo)) {
- /* also hold a ref so it isn't free'd while pinned */
- drm_gem_object_reference(bo);
- } else {
- dev_err(plane->dev->dev, "unpin fifo full!\n");
- omap_gem_put_paddr(bo);
- }
+ omap_framebuffer_unpin(val);
+ mutex_lock(&dev->mode_config.mutex);
+ drm_framebuffer_unreference(val);
+ mutex_unlock(&dev->mode_config.mutex);
}
/* update which fb (if any) is pinned for scanout */
@@ -87,23 +84,22 @@ static int update_pin(struct drm_plane *plane, struct drm_framebuffer *fb)
struct drm_framebuffer *pinned_fb = omap_plane->pinned_fb;
if (pinned_fb != fb) {
- int ret;
+ int ret = 0;
DBG("%p -> %p", pinned_fb, fb);
- if (fb)
+ if (fb) {
drm_framebuffer_reference(fb);
-
- ret = omap_framebuffer_replace(pinned_fb, fb, plane, unpin);
+ ret = omap_framebuffer_pin(fb);
+ }
if (pinned_fb)
- drm_framebuffer_unreference(pinned_fb);
+ drm_flip_work_queue(&omap_plane->unpin_work, pinned_fb);
if (ret) {
dev_err(plane->dev->dev, "could not swap %p -> %p\n",
omap_plane->pinned_fb, fb);
- if (fb)
- drm_framebuffer_unreference(fb);
+ drm_framebuffer_unreference(fb);
omap_plane->pinned_fb = NULL;
return ret;
}
@@ -170,17 +166,14 @@ static void omap_plane_post_apply(struct omap_drm_apply *apply)
struct omap_plane *omap_plane =
container_of(apply, struct omap_plane, apply);
struct drm_plane *plane = &omap_plane->base;
+ struct omap_drm_private *priv = plane->dev->dev_private;
struct omap_overlay_info *info = &omap_plane->info;
- struct drm_gem_object *bo = NULL;
struct callback cb;
cb = omap_plane->apply_done_cb;
omap_plane->apply_done_cb.fxn = NULL;
- while (kfifo_get(&omap_plane->unpin_fifo, &bo)) {
- omap_gem_put_paddr(bo);
- drm_gem_object_unreference_unlocked(bo);
- }
+ drm_flip_work_commit(&omap_plane->unpin_work, priv->wq);
if (cb.fxn)
cb.fxn(cb.arg);
@@ -277,8 +270,7 @@ static void omap_plane_destroy(struct drm_plane *plane)
omap_plane_disable(plane);
drm_plane_cleanup(plane);
- WARN_ON(!kfifo_is_empty(&omap_plane->unpin_fifo));
- kfifo_free(&omap_plane->unpin_fifo);
+ drm_flip_work_cleanup(&omap_plane->unpin_work);
kfree(omap_plane);
}
@@ -399,7 +391,8 @@ struct drm_plane *omap_plane_init(struct drm_device *dev,
if (!omap_plane)
goto fail;
- ret = kfifo_alloc(&omap_plane->unpin_fifo, 16, GFP_KERNEL);
+ ret = drm_flip_work_init(&omap_plane->unpin_work, 16,
+ "unpin", unpin_worker);
if (ret) {
dev_err(dev->dev, "could not allocate unpin FIFO\n");
goto fail;
--
1.8.3.1
More information about the dri-devel
mailing list