[PATCHv2 5/5] ARM: dts: Add dt binding documentation for exynos rotator

Tomasz Figa t.figa at samsung.com
Fri Aug 9 06:15:53 PDT 2013


Hi Chanho,

On Friday 09 of August 2013 16:40:53 Chanho Park wrote:
> This patch describes each nodes of rotator and specifies a example how to
> bind it.
> 
> Signed-off-by: Chanho Park <chanho61.park at samsung.com>
> Cc: Thomas Abraham <thomas.abraham at linaro.org>
> Cc: Kukjin Kim <kgene.kim at samsung.com>
> Cc: Inki Dae <inki.dae at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
>  .../devicetree/bindings/gpu/samsung-rotator.txt    |   26
> ++++++++++++++++++++ 1 file changed, 26 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/gpu/samsung-rotator.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
> b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt new file
> mode 100644
> index 0000000..31ee7b5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.txt
> @@ -0,0 +1,26 @@
> +* Samsung Image Rotator
> +
> +Required properties:
> +  - compatible : value should be following:
> +	(a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210
> +	(b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412
> +	(c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250
> +
> +  - reg : Physical base address of the IP registers and length of memory
> +	  mapped region.
> +
> +  - interrupts : Interrupt number of Rotator

What about: interrupt specifier for rotator interrupt, according to format 
specific to interrupt parent.

> +
> +  - clocks : Clock number described in
> Documentations/devicetree/binding/clock. +

Perhaps: clock specifier for rotator clock, according to generic clock 
bindings.

> +  - clock-names : Clock name.

Names of clocks specified in "clocks" property. For exynos rotator this 
property should contain only one name: "rotator".

> +Example:
> +	rotator: rotator at 12800000 {

I wonder if we shouldn't use a more generic name here, according to ePAPR 
node naming recommendation.

> +		compatible = "samsung,exynos4210-rotator";
> +		reg = <0x12810000 0x1000>;

Typo. Node has 12800000 in unit-address suffix, but this property has 
12810000 instead.

> +		interrupts = <0 83 0>;
> +		clocks = <&clock 278>;
> +		clock-names = "rotator";
> +		status = "disabled";

Status property should be omitted from this example, as it's not a part of 
this binding.

Best regards,
Tomasz



More information about the dri-devel mailing list