[Bug 54381] [drm:radeon_atom_pick_pll] *ERROR* unable to allocate a PPLL

[bugzilla-daemon at bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=54381





--- Comment #5 from Alex Deucher <alexdeucher at gmail.com>  2013-02-25 20:16:03 ---
(In reply to comment #4)
> As per xrandr (projector NOT connected):
> DVI-0: 1280x1024 60.0*+
> DVI-1: 1920x1200 60.0*+
> HDMI-0: 1920x1200 60.0*+
> 
> The output DVI-1 with the projector connected:
> 1920x1080 60.0*+
> 
> Worked fine until 3.7.0.

Can you dump the full modelines with pixel clocks (xrandr --verbose)?  I
suspect the pixel clocks for 1920x1200 and 1920x1080 modes are close enough
that one of the monitors was able to tolerate a slightly incorrect pixel clock.
 Some monitors are more tolerant than others.  Projectors tend to be since they
usually support a wide range of signals from various inputs.

-- 
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.