[PATCH 2/8] drm/i915: Use cpu_transcoder for HSW_TVIDEO_DIP_* instead of pipe

Rodrigo Vivi rodrigo.vivi at gmail.com
Mon Feb 25 14:55:16 PST 2013


While old platforms had 3 transcoders and 3 pipes (1:1), HSW has
4 transcoders and 3 pipes.
These regs were being used only by HDMI code where pipe is always the same
thing as cpu_transcoder.
This patch allow us to use them for DP, specially for TRANSCODER_EDP.

v2: Adding HSW_TVIDEO_DIP_VSC_DATA to transmit vsc to eDP.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
---
 drivers/gpu/drm/i915/i915_reg.h   | 18 ++++++++++--------
 drivers/gpu/drm/i915/intel_hdmi.c | 13 +++++++------
 2 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 527b664..b715ecd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3754,14 +3754,16 @@
 #define HSW_VIDEO_DIP_VSC_ECC_B		0x61344
 #define HSW_VIDEO_DIP_GCP_B		0x61210
 
-#define HSW_TVIDEO_DIP_CTL(pipe) \
-	 _PIPE(pipe, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
-#define HSW_TVIDEO_DIP_AVI_DATA(pipe) \
-	 _PIPE(pipe, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
-#define HSW_TVIDEO_DIP_SPD_DATA(pipe) \
-	 _PIPE(pipe, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
-#define HSW_TVIDEO_DIP_GCP(pipe) \
-	_PIPE(pipe, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
+#define HSW_TVIDEO_DIP_CTL(trans) \
+	 _TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B)
+#define HSW_TVIDEO_DIP_AVI_DATA(trans) \
+	 _TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B)
+#define HSW_TVIDEO_DIP_SPD_DATA(trans) \
+	 _TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B)
+#define HSW_TVIDEO_DIP_GCP(trans) \
+	_TRANSCODER(trans, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B)
+#define HSW_TVIDEO_DIP_VSC_DATA(trans) \
+	 _TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B)
 
 #define _TRANS_HTOTAL_B          0xe1000
 #define _TRANS_HBLANK_B          0xe1004
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 5a6138c..26290c1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -120,13 +120,14 @@ static u32 hsw_infoframe_enable(struct dip_infoframe *frame)
 	}
 }
 
-static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum pipe pipe)
+static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame,
+				  enum transcoder cpu_transcoder)
 {
 	switch (frame->type) {
 	case DIP_TYPE_AVI:
-		return HSW_TVIDEO_DIP_AVI_DATA(pipe);
+		return HSW_TVIDEO_DIP_AVI_DATA(cpu_transcoder);
 	case DIP_TYPE_SPD:
-		return HSW_TVIDEO_DIP_SPD_DATA(pipe);
+		return HSW_TVIDEO_DIP_SPD_DATA(cpu_transcoder);
 	default:
 		DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
 		return 0;
@@ -293,8 +294,8 @@ static void hsw_write_infoframe(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
-	u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
-	u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->pipe);
+	u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
+	u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->cpu_transcoder);
 	unsigned int i, len = DIP_HEADER_SIZE + frame->len;
 	u32 val = I915_READ(ctl_reg);
 
@@ -568,7 +569,7 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
 	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
-	u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
+	u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->cpu_transcoder);
 	u32 val = I915_READ(reg);
 
 	assert_hdmi_port_disabled(intel_hdmi);
-- 
1.8.1.2



More information about the dri-devel mailing list