[PATCH 1/4] drm/tilcdc: add TI LCD Controller DRM driver (v3)
Jean-Francois Moine
moinejf at free.fr
Wed Jan 23 01:42:16 PST 2013
Hi Rob,
As I wanted to re-use your nxp-tda998x driver for the Marvell Dove SoC,
I had a look at your IT LCD driver. Comments below.
On Tue, 22 Jan 2013 16:36:22 -0600
Rob Clark <robdclark at gmail.com> wrote:
> A simple DRM/KMS driver for the TI LCD Controller found in various
> smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the
> CMA helpers. Currently only the TFP410 DVI encoder is supported
> (tested with beaglebone + DVI cape). There are also various LCD
> displays, for which support can be added (as I get hw to test on),
> and an external i2c HDMI encoder found on some boards.
>
> The display controller supports a single CRTC. And the encoder+
> connector are split out into sub-devices. Depending on which LCD
> or external encoder is actually present, the appropriate output
> module(s) will be loaded.
>
> v1: original
> v2: fix fb refcnting and few other cleanups
> v3: get +/- vsync/hsync from timings rather than panel-info, add
> option DT max-bandwidth field so driver doesn't attempt to
> pick a display mode with too high memory bandwidth, and other
> small cleanups
>
> Signed-off-by: Rob Clark <robdclark at gmail.com>
> ---
> drivers/gpu/drm/Kconfig | 2 +
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/tilcdc/Kconfig | 10 +
> drivers/gpu/drm/tilcdc/Makefile | 8 +
> drivers/gpu/drm/tilcdc/tilcdc_crtc.c | 597 ++++++++++++++++++++++++++++++++
> drivers/gpu/drm/tilcdc/tilcdc_drv.c | 605 +++++++++++++++++++++++++++++++++
> drivers/gpu/drm/tilcdc/tilcdc_drv.h | 159 +++++++++
> drivers/gpu/drm/tilcdc/tilcdc_regs.h | 154 +++++++++
> drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 423 +++++++++++++++++++++++
> drivers/gpu/drm/tilcdc/tilcdc_tfp410.h | 26 ++
> 10 files changed, 1985 insertions(+)
> create mode 100644 drivers/gpu/drm/tilcdc/Kconfig
> create mode 100644 drivers/gpu/drm/tilcdc/Makefile
> create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_crtc.c
> create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_drv.c
> create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_drv.h
> create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_regs.h
> create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.c
> create mode 100644 drivers/gpu/drm/tilcdc/tilcdc_tfp410.h
[snip]
> diff --git a/drivers/gpu/drm/tilcdc/Kconfig b/drivers/gpu/drm/tilcdc/Kconfig
> new file mode 100644
> index 0000000..ee9b592
> --- /dev/null
> +++ b/drivers/gpu/drm/tilcdc/Kconfig
> @@ -0,0 +1,10 @@
> +config DRM_TILCDC
> + tristate "DRM Support for TI LCDC Display Controller"
> + depends on DRM && OF
> + select DRM_KMS_HELPER
> + select DRM_KMS_CMA_HELPER
> + select DRM_GEM_CMA_HELPER
> + help
> + Choose this option if you have an TI SoC with LCDC display
> + controller, for example AM33xx in beagle-bone, DA8xx, or
> + OMAP-L1xx. This driver replaces the FB_DA8XX fbdev driver.
> diff --git a/drivers/gpu/drm/tilcdc/Makefile b/drivers/gpu/drm/tilcdc/Makefile
> new file mode 100644
> index 0000000..1359cc2
> --- /dev/null
> +++ b/drivers/gpu/drm/tilcdc/Makefile
> @@ -0,0 +1,8 @@
> +ccflags-y := -Iinclude/drm -Werror
> +
> +tilcdc-y := \
> + tilcdc_crtc.o \
> + tilcdc_tfp410.o \
> + tilcdc_drv.o
As I understand, this means that the 3 objects will go into the
resident kernel.
I though that the device tree was created for Linux distributors who
might generate generic ARM kernels, the choice of the drivers being
done according the local device tree.
From this point of vue, it would be nicer to have 2 separate modules:
tilcdc and tfp410, tilcdc_crtc being included in one of these ones
(I did not look deep enough at the code to know which).
[snip]
> diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.c b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> new file mode 100644
> index 0000000..cf1fddc
> --- /dev/null
> +++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.c
> @@ -0,0 +1,605 @@
[snip]
> +static struct drm_driver tilcdc_driver = {
> + .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET,
> + .load = tilcdc_load,
> + .unload = tilcdc_unload,
> + .preclose = tilcdc_preclose,
> + .lastclose = tilcdc_lastclose,
> + .irq_handler = tilcdc_irq,
> + .irq_preinstall = tilcdc_irq_preinstall,
> + .irq_postinstall = tilcdc_irq_postinstall,
> + .irq_uninstall = tilcdc_irq_uninstall,
> + .get_vblank_counter = drm_vblank_count,
> + .enable_vblank = tilcdc_enable_vblank,
> + .disable_vblank = tilcdc_disable_vblank,
> + .gem_free_object = drm_gem_cma_free_object,
> + .gem_vm_ops = &drm_gem_cma_vm_ops,
> + .dumb_create = drm_gem_cma_dumb_create,
> + .dumb_map_offset = drm_gem_cma_dumb_map_offset,
> + .dumb_destroy = drm_gem_cma_dumb_destroy,
> +#ifdef CONFIG_DEBUG_FS
> + .debugfs_init = tilcdc_debugfs_init,
> + .debugfs_cleanup = tilcdc_debugfs_cleanup,
> +#endif
> + .fops = &fops,
> + .name = "tilcdc",
> + .desc = "TI LCD Controller DRM",
> + .date = "20121205",
> + .major = 1,
> + .minor = 0,
> +};
> +
> +/*
> + * Power management:
> + */
> +
> +#if CONFIG_PM_SLEEP
Should be:
#ifdef CONFIG_PM_SLEEP
[snip]
> +static struct of_device_id tilcdc_of_match[] = {
> + { .compatible = "ti,am33xx-tilcdc", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, tilcdc_of_match);
> +
> +static struct platform_driver tilcdc_platform_driver = {
> + .probe = tilcdc_pdev_probe,
> + .remove = tilcdc_pdev_remove,
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = "tilcdc",
> + .pm = &tilcdc_pm_ops,
> + .of_match_table = tilcdc_of_match,
> + },
> +};
> +
> +static int __init tilcdc_drm_init(void)
> +{
> + DBG("init");
> + tilcdc_tfp410_init();
This function may be called twice if "tilcdc,tfp410" is in the DT.
> + return platform_driver_register(&tilcdc_platform_driver);
> +}
> +
> +static void __exit tilcdc_drm_fini(void)
> +{
> + DBG("fini");
> + tilcdc_tfp410_fini();
> + platform_driver_unregister(&tilcdc_platform_driver);
> +}
> +
> +module_init(tilcdc_drm_init);
> +module_exit(tilcdc_drm_fini);
> +
> +MODULE_AUTHOR("Rob Clark <robdclark at gmail.com");
> +MODULE_DESCRIPTION("TI LCD Controller DRM Driver");
> +MODULE_LICENSE("GPL");
--
Ken ar c'hentañ | ** Breizh ha Linux atav! **
Jef | http://moinejf.free.fr/
More information about the dri-devel
mailing list