[Intel-gfx] [PATCH] drm/i915: make user mode sync polarity setting explicit

Imre Deak imre.deak at intel.com
Tue Jul 30 05:47:06 PDT 2013


On Tue, 2013-07-30 at 15:43 +0300, Imre Deak wrote:
> On Tue, 2013-07-30 at 11:57 +0100, Chris Wilson wrote:
> > On Tue, Jul 30, 2013 at 01:36:32PM +0300, Imre Deak wrote:
> > > Userspace can pass a mode with an unspecified vsync/hsync polarity
> > > setting. All encoders in the Intel driver take this to mean a negative
> > > polarity setting. The HW readout/state checker code on the other hand
> > > needs these flags to be explicitly set, otherwise the state checker will
> > > WARN about the mismatch.
> > > 
> > > Get rid of the WARN by making the polarity setting explicit in the
> > > adjusted mode flags based on the requested mode flags. This will keep
> > > the existing behavior otherwise.
> > > 
> > > Note that we could guess from the other timing parameters whether the
> > > user wanted a VESA or other standard mode and set the polarity
> > > accordingly. This is what the NV driver does
> > > (drivers/gpu/drm/nouveau/dispnv04/crtc.c), but I think that's not very
> > > exact and would change the existing behavior of the Intel driver.
> > 
> > Right, don't guess. If the user wanted the standard mode, then the flags
> > would have been taken from the standard modeline.
> >  
> > > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65442
> > 
> > You can add a tested-by here for qa.
> 
> Tested-by: Cancan Feng <cancan.feng at intel.com>
>  
> > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > Reviewed-by: Chris Wilson <chris at chris-wilson.co.uk>
> 
> CC'ing people who might be interested.
> 
> After some discussion with Ville, we could refine this further at the
> drm core level by enforcing the Intel behavior - defaulting to negative
> polarity and also checking/sanitizing the PHSYNC/PVSYNC flags.
> PHSYNC/PVSYNC isn't used by the Intel driver so we could still go with

Sorry, I meant PCSYNC/NCSYNC above.

--Imre

> the above patch for now and follow-up with a drm core fix.
> 
> We should probably also reject modes at drm core level where both
> positive and negative flags are set, again in a separate follow-up
> patch.
> 
> --Imre

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20130730/542259e6/attachment.pgp>


More information about the dri-devel mailing list