[PATCH V2] drm/edid: kernel-doc minimal cleanup

[Nishanth Menon]

Some basic cleanups for kernel-doc errors or missing documentation
parameters.

Warnings generated by ./scripts/kernel-doc drivers/gpu/drm/drm_edid.c >Kerr

Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'adapter'
Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'buf'
Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'block'
Warning(drivers/gpu/drm/drm_edid.c:997): No description found for parameter 'len'
Warning(drivers/gpu/drm/drm_edid.c:1138): No description found for parameter 'adapter'
Warning(drivers/gpu/drm/drm_edid.c:1467): No description found for parameter 'connector'
Warning(drivers/gpu/drm/drm_edid.c:1467): No description found for parameter 'edid'
Warning(drivers/gpu/drm/drm_edid.c:1467): No description found for parameter 'revision'
Warning(drivers/gpu/drm/drm_edid.c:1467): Excess function parameter 'timing_level' description in 'drm_mode_std'
Warning(drivers/gpu/drm/drm_edid.c:2010): No description found for parameter 'connector'
Warning(drivers/gpu/drm/drm_edid.c:2072): No description found for parameter 'connector'
Warning(drivers/gpu/drm/drm_edid.c:2237): No description found for parameter 'edid'
Warning(drivers/gpu/drm/drm_edid.c:2616): No description found for parameter 'edid'
Warning(drivers/gpu/drm/drm_edid.c:2658): No description found for parameter 'edid'

Cc: David Airlie <airlied at linux.ie>
Cc: Dave Airlie <airlied at redhat.com>
Cc: Adam Jackson <ajax at redhat.com>
Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: dri-devel at lists.freedesktop.org

Signed-off-by: Nishanth Menon <nm at ti.com>
---

V2: review comments incorporated

V1: http://marc.info/?t=136214115900005&r=1&w=2

It does seem the drm_edid.c could do with more documentation cleanup,
but I have stayed with the bare minimum.
the above error is based off:
master de1a226 Merge tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux
from: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git

defconfig used: omap2plus_defconfig

Disclaimer: I am no drm expert, and I tried to use my best judgement about what
the meaning of the parameters might be, hope it helps.

 drivers/gpu/drm/drm_edid.c |   31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c194f4e..bd864b5 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -982,14 +982,14 @@ EXPORT_SYMBOL(drm_edid_is_valid);
 
 #define DDC_SEGMENT_ADDR 0x30
 /**
- * Get EDID information via I2C.
- *
- * \param adapter : i2c device adaptor
- * \param buf     : EDID data buffer to be filled
- * \param len     : EDID data buffer length
- * \return 0 on success or -1 on failure.
+ * drm_do_probe_ddc_edid() - Get EDID information via I2C.
+ * @adapter:	i2c device adapter
+ * @buf:	EDID data buffer to be filled
+ * @block:	EDID block to get
+ * @len:	EDID data buffer length
  *
  * Try to fetch EDID information by calling i2c driver function.
+ * Return 0 on success or -1 on failure.
  */
 static int
 drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
@@ -1128,10 +1128,10 @@ out:
 }
 
 /**
- * Probe DDC presence.
+ * drm_probe_ddc() - Probe DDC presence
+ * @adapter:	i2c device adapter
  *
- * \param adapter : i2c device adaptor
- * \return 1 on success
+ * returns 1 on success
  */
 bool
 drm_probe_ddc(struct i2c_adapter *adapter)
@@ -1455,8 +1455,10 @@ bad_std_timing(u8 a, u8 b)
 
 /**
  * drm_mode_std - convert standard mode info (width, height, refresh) into mode
+ * @connector: attached connector
+ * @edid: EDID data
  * @t: standard timing params
- * @timing_level: standard timing level
+ * @revision: EDID revision
  *
  * Take the standard timing params (in this case width, aspect, and refresh)
  * and convert them into a real mode using CVT/GTF/DMT.
@@ -2000,6 +2002,7 @@ do_established_modes(struct detailed_timing *timing, void *c)
 
 /**
  * add_established_modes - get est. modes from EDID and add them
+ * @connector: attached connector
  * @edid: EDID block to scan
  *
  * Each EDID block contains a bitmap of the supported "established modes" list
@@ -2062,6 +2065,7 @@ do_standard_modes(struct detailed_timing *timing, void *c)
 
 /**
  * add_standard_modes - get std. modes from EDID and add them
+ * @connector: attached connector
  * @edid: EDID block to scan
  *
  * Standard modes can be calculated using the appropriate standard (DMT,
@@ -2192,7 +2196,7 @@ do_detailed_mode(struct detailed_timing *timing, void *c)
 	}
 }
 
-/*
+/**
  * add_detailed_modes - Add modes from detailed timings
  * @connector: attached connector
  * @edid: EDID block to scan
@@ -2231,7 +2235,8 @@ add_detailed_modes(struct drm_connector *connector, struct edid *edid,
 #define EDID_CEA_VCDB_QS	(1 << 6)
 
 /**
- * Search EDID for CEA extension block.
+ * drm_find_cea_extension() - Search EDID for CEA extension block.
+ * @edid: EDID data
  */
 u8 *drm_find_cea_extension(struct edid *edid)
 {
@@ -2604,6 +2609,7 @@ EXPORT_SYMBOL(drm_detect_hdmi_monitor);
 
 /**
  * drm_detect_monitor_audio - check monitor audio capability
+ * @edid: EDID data
  *
  * Monitor should have CEA extension block.
  * If monitor has 'basic audio', but no CEA audio blocks, it's 'basic
@@ -2649,6 +2655,7 @@ EXPORT_SYMBOL(drm_detect_monitor_audio);
 
 /**
  * drm_rgb_quant_range_selectable - is RGB quantization range selectable?
+ * @edid: EDID data
  *
  * Check whether the monitor reports the RGB quantization range selection
  * as supported. The AVI infoframe can then be used to inform the monitor
-- 
1.7.9.5