[PATCH v2 3/3] ARM: shmobile: marzen: Add Display Unit support

[Laurent Pinchart]

Hi Simon,

On Wednesday 27 March 2013 13:01:43 Simon Horman wrote:
> On Thu, Mar 14, 2013 at 03:35:46PM +0100, Laurent Pinchart wrote:
> > Only the DU0 VGA output is currently supported. Support for the DU0 LVDS
> > and DU1 LVDS outputs will require information about the panels that will
> > be connected to those outputs.
> > 
> > Signed-off-by: Laurent Pinchart 
> > <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > 
> >  arch/arm/configs/marzen_defconfig     |  2 ++
> >  arch/arm/mach-shmobile/board-marzen.c | 65 ++++++++++++++++++++++++++++++
> >  2 files changed, 67 insertions(+)

[snip]

> > diff --git a/arch/arm/mach-shmobile/board-marzen.c
> > b/arch/arm/mach-shmobile/board-marzen.c index cdcb799..0020506 100644
> > --- a/arch/arm/mach-shmobile/board-marzen.c
> > +++ b/arch/arm/mach-shmobile/board-marzen.c

[snip]

> > @@ -363,6 +397,37 @@ static void __init marzen_init(void)
> >  	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
> >  	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
> > 
> > +	/* Display Unit 0 (CN10: ARGB0) */
> > +	gpio_request(GPIO_FN_DU0_DR7, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR6, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR5, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR4, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR3, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR2, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR1, NULL);
> > +	gpio_request(GPIO_FN_DU0_DR0, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG7, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG6, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG5, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG4, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG3, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG2, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG1, NULL);
> > +	gpio_request(GPIO_FN_DU0_DG0, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB7, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB6, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB5, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB4, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB3, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB2, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB1, NULL);
> > +	gpio_request(GPIO_FN_DU0_DB0, NULL);
> > +	gpio_request(GPIO_FN_DU0_EXVSYNC_DU0_VSYNC, NULL);
> > +	gpio_request(GPIO_FN_DU0_EXHSYNC_DU0_HSYNC, NULL);
> > +	gpio_request(GPIO_FN_DU0_DOTCLKOUT0, NULL);
> > +	gpio_request(GPIO_FN_DU0_DOTCLKOUT1, NULL);
> > +	gpio_request(GPIO_FN_DU0_DISP, NULL);
> > +
> >  	/* USB (CN21) */
> >  	gpio_request(GPIO_FN_USB_OVC0, NULL);
> >  	gpio_request(GPIO_FN_USB_OVC1, NULL);
> 
> Hi Laurent,
> 
> do you have a version of this patch that will work in conjunction with
> recent pinctrl changes and adds an entry/entries to marzen_pinctrl_map[]
> instead of calling gpio_request?

I'm working on that, the next version will use the pinctrl API. Do you need an 
early patch ?

-- 
Regards,

Laurent Pinchart