nouveau GF108 kernel crash in optimus mode when enabling external display output
Pasi Kärkkäinen
pasik at iki.fi
Sun May 19 12:57:20 PDT 2013
On Thu, May 09, 2013 at 06:11:23PM +0300, Pasi Kärkkäinen wrote:
> Hello,
>
> ping also here.. any other information needed about this nouveau kernel crash?
>
So this hard kernel crash stil happens with Linux 3.9.2,
with the difference that I don't get to see the traceback with 3.9.2.
(with 3.8.x kernels I can see the crash errors/traceback on the console).
-- Pasi
>
> On Mon, May 06, 2013 at 12:06:04AM +0300, Pasi Kärkkäinen wrote:
> > Hello,
> >
> > Lenovo T430 laptop with intel+nvidia hybrid graphics, optimus enabled in BIOS:
> >
> > $ lspci | grep VGA
> > 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
> > 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro NVS 5400M] (rev a1)
> >
> > $ uname -a
> > Linux localhost.localdomain 3.8.11-200.fc18.x86_64 #1 SMP Wed May 1 19:44:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
> >
> > I boot up the system with only laptop internal LVDS active on intel gpu, and when in X session,
> > I enable the second display on nouveau gpu connected to the dock DP2/DVI connector.
> > At this point the kernel crashes immediately.
> >
> > Screenshots of the kernel crash/stacktrace here:
> > http://pasik.reaktio.net/nouveau/debug/nouveau-kernel-crash01.jpg
> > http://pasik.reaktio.net/nouveau/debug/nouveau-kernel-crash02.jpg
> >
> > hand-written bits from the kernel crash:
> >
> > Pid: 1208, comm: Xorg Not tainted 3.8.11-200.fc18.x86_64 #1 LENOVO 2349H2G/2349H2G
> > RIP: 0010:[<ffffffffa01abb7e>] [<ffffffffa01abb7e>] nvc0_vm_map_sg+0x8e/0x110 [nouveau]
> > RSP: 0018:ffff8803298357c8 EFLAGS: 00010206
> > ..
> > Process Xorg (pid: 1208,..)
> > ..
> > Call Trace:
> > .. nouveau_vm_map_sg+0xc2/0x130 [nouveau]
> > .. nouveau_vma_getmap.isra.11+0x68/0xa0 [nouveau]
> > .. nouveau_bo_move_m2mf.isra.12+0x85/0x140 [nouveau]
> > .. ? nouveau_vm_map_at+0x153/0x1c0 [nouveau]
> > .. nouveau_bo_move+0xa5/0x400 [nouveau]
> > .. ttm_bo_handle_move_mem+0x245/0x610 [ttm]
> >
> > More info from the screenshots above..
> >
> >
> > dmesg drm bits before the crash:
> >
> > [ 0.137586] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
> > [ 0.137590] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
> > [ 0.137591] vgaarb: loaded
> > [ 0.137591] vgaarb: bridge control possible 0000:01:00.0
> > [ 0.137592] vgaarb: no bridge control possible 0000:00:02.0
> > [ 0.529802] fb0: VESA VGA frame buffer device
> > [ 0.877212] ata1.00: supports DRM functions and may not be fully accessible
> > [ 0.878010] ata1.00: supports DRM functions and may not be fully accessible
> > [ 1.969486] [drm] Initialized drm 1.1.0 20060810
> > [ 1.990584] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG_.VID_ handle
> > [ 1.990610] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
> > [ 1.990874] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1780a1
> > [ 1.990877] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
> > [ 1.990878] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
> > [ 1.992485] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> > [ 2.002182] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 2.002184] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> > [ 2.002243] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 2.002245] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> > [ 2.189928] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
> > [ 2.189935] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
> > [ 2.190143] nouveau [ VBIOS][0000:01:00.0] BIT signature found
> > [ 2.190149] nouveau [ VBIOS][0000:01:00.0] version 70.08.b7.02.02
> > [ 2.190467] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
> > [ 2.190470] nouveau [ VBIOS][0000:01:00.0] running init tables
> > [ 2.278184] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
> > [ 2.278189] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
> > [ 2.278192] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
> > [ 2.311802] nouveau [ DRM] VRAM: 512 MiB
> > [ 2.311805] nouveau [ DRM] GART: 512 MiB
> > [ 2.311810] nouveau [ DRM] BIT BIOS found
> > [ 2.311814] nouveau [ DRM] Bios version 70.08.b7.02
> > [ 2.311831] nouveau [ DRM] TMDS table version 2.0
> > [ 2.311832] nouveau [ DRM] DCB version 4.0
> > [ 2.311833] nouveau [ DRM] DCB outp 00: 01800323 00010034
> > [ 2.311834] nouveau [ DRM] DCB outp 01: 02811300 00000000
> > [ 2.311835] nouveau [ DRM] DCB outp 02: 028223a6 0f220010
> > [ 2.311836] nouveau [ DRM] DCB outp 03: 02822362 00020010
> > [ 2.311837] nouveau [ DRM] DCB outp 04: 048333b6 0f220010
> > [ 2.311838] nouveau [ DRM] DCB outp 05: 04833372 00020010
> > [ 2.311839] nouveau [ DRM] DCB outp 06: 088443c6 0f220010
> > [ 2.311840] nouveau [ DRM] DCB outp 07: 08844382 00020010
> > [ 2.311841] nouveau [ DRM] DCB conn 00: 00000040
> > [ 2.311842] nouveau [ DRM] DCB conn 01: 00000100
> > [ 2.311843] nouveau [ DRM] DCB conn 02: 00110246
> > [ 2.311844] nouveau [ DRM] DCB conn 03: 00220346
> > [ 2.311845] nouveau [ DRM] DCB conn 04: 01400446
> > [ 2.312502] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> > [ 2.312503] [drm] No driver support for vblank timestamp query.
> > [ 2.312575] nouveau [ DRM] ACPI backlight interface available, not registering our own
> > [ 2.312612] nouveau W[ DRM] voltage table 0x50 unknown
> > [ 2.312769] nouveau [ DRM] 2 available performance level(s)
> > [ 2.312771] nouveau [ DRM] 1: core 270MHz shader 540MHz memory 405MHz
> > [ 2.312772] nouveau [ DRM] 3: core 475MHz shader 950MHz memory 900MHz voltage 10mV
> > [ 2.312774] nouveau [ DRM] c: core 270MHz shader 540MHz memory 405MHz
> > [ 2.316569] nouveau [ DRM] MM: using COPY1 for buffer copies
> > [ 2.352568] nouveau 0000:01:00.0: No connectors reported connected with modes
> > [ 2.352570] [drm] Cannot find any crtc or sizes - going 1024x768
> > [ 2.385026] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88032849b000
> > [ 2.385136] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
> > [ 2.385139] nouveau 0000:01:00.0: registered panic notifier
> > [ 2.385146] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
> > [ 2.386528] [drm] Memory usable by graphics device = 2048M
> > [ 2.386532] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
> > [ 2.386606] i915 0000:00:02.0: setting latency timer to 64
> > [ 2.442334] i915 0000:00:02.0: irq 43 for MSI/MSI-X
> > [ 2.442351] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> > [ 2.442353] [drm] Driver supports precise vblank timestamp query.
> > [ 2.442720] vga_switcheroo: enabled
> > [ 2.442763] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
> > [ 2.442768] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
> > [ 2.508974] fbcon: inteldrmfb (fb0) is primary device
> > [ 3.292775] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
> > [ 3.319164] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
> > [ 3.698310] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
> >
> >
> > Thanks,
> >
> > -- Pasi
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/dri-devel
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list