[PATCH 3/3] drm/edid: parse the list of additional 3D modes
Thomas Wood
thomas.wood at intel.com
Fri Nov 29 07:33:28 PST 2013
Parse 2D_VIC_order_X and 3D_Structure_X from the list at the end of the
HDMI Vendor Specific Data Block.
v2: Use an offset value depending on 3D_Multi_present and add
detail_present. (Ville Syrjälä)
Signed-off-by: Thomas Wood <thomas.wood at intel.com>
---
drivers/gpu/drm/drm_edid.c | 64 ++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 59 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index f1d6e1e..9426563 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -2734,7 +2734,7 @@ static int
do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
const u8 *video_db, u8 video_len)
{
- int modes = 0, offset = 0, i, multi_present = 0;
+ int modes = 0, offset = 0, i, multi_present = 0, multi_len;
u8 vic_len, hdmi_3d_len = 0;
u16 mask;
u16 structure_all;
@@ -2783,12 +2783,15 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
if (!(multi_present == 1 || multi_present == 2))
goto out;
- if ((multi_present == 1 && len < (9 + offset)) ||
- (multi_present == 2 && len < (11 + offset)))
+ if (multi_present == 1)
+ multi_len = 2;
+ else
+ multi_len = 4;
+
+ if (len < (offset + hdmi_3d_len))
goto out;
- if ((multi_present == 1 && hdmi_3d_len < 2) ||
- (multi_present == 2 && hdmi_3d_len < 4))
+ if (hdmi_3d_len < multi_len)
goto out;
/* 3D_Structure_ALL */
@@ -2808,6 +2811,57 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
video_len, i);
}
+ if (hdmi_3d_len <= multi_len)
+ goto out;
+
+ offset += multi_len;
+
+ for (i = 0; i < (hdmi_3d_len - multi_len); i++) {
+ int vic_index;
+ struct drm_display_mode *newmode = NULL;
+ unsigned int newflag = 0;
+ bool detail_present;
+
+ detail_present = ((db[8 + offset + i] & 0x0f) > 7);
+
+ if (detail_present && (i + 1 == hdmi_3d_len - multi_len))
+ break;
+
+ /* 2D_VIC_order_X */
+ vic_index = db[8 + offset + i] >> 4;
+
+ /* 3D_Structure_X */
+ switch (db[8 + offset + i] & 0x0f) {
+ case 0:
+ newflag = DRM_MODE_FLAG_3D_FRAME_PACKING;
+ break;
+ case 6:
+ newflag = DRM_MODE_FLAG_3D_TOP_AND_BOTTOM;
+ break;
+ case 8:
+ /* 3D_Detail_X */
+ if ((db[9 + offset + i] >> 4) == 1)
+ newflag = DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF;
+ break;
+ }
+
+ if (newflag != 0) {
+ newmode = drm_display_mode_from_vic_index(connector,
+ video_db,
+ video_len,
+ vic_index);
+
+ if (newmode) {
+ newmode->flags |= newflag;
+ drm_mode_probed_add(connector, newmode);
+ modes++;
+ }
+ }
+
+ if (detail_present)
+ i++;
+ }
+
out:
return modes;
}
--
1.8.4.2
More information about the dri-devel
mailing list