[PATCH] drm/doc: Document drm_add_modes_noedid() usage

[Laurent Pinchart]

From: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

And fix a spelling mistake.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 Documentation/DocBook/drm.tmpl | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index ed1d6d2..53963be 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -1781,10 +1781,16 @@ void intel_crt_init(struct drm_device *dev)
             and then retrieves a list of modes by calling the connector
             <methodname>get_modes</methodname> helper operation.
           </para>
+         <para>
+            If the helper operation returns no mode, and if the connector status
+            is connector_status_connected, standard VESA DMT modes up to
+            1024x768 are automatically added to the modes list by a call to
+            <function>drm_add_modes_noedid</function>.
+          </para>
           <para>
-            The function filters out modes larger than
+            The function then filters out modes larger than
             <parameter>max_width</parameter> and <parameter>max_height</parameter>
-            if specified. It then calls the connector
+            if specified. It finally calls the connector
             <methodname>mode_valid</methodname> helper operation for  each mode in
             the probed list to check whether the mode is valid for the connector.
           </para>
@@ -1924,12 +1930,20 @@ void intel_crt_init(struct drm_device *dev)
           <synopsis>int (*get_modes)(struct drm_connector *connector);</synopsis>
           <para>
             Fill the connector's <structfield>probed_modes</structfield> list
-            by parsing EDID data with <function>drm_add_edid_modes</function> or
-            calling <function>drm_mode_probed_add</function> directly for every
+            by parsing EDID data with <function>drm_add_edid_modes</function>,
+            adding standard VESA DMT modes with <function>drm_add_modes_noedid</function>,
+            or calling <function>drm_mode_probed_add</function> directly for every
             supported mode and return the number of modes it has detected. This
             operation is mandatory.
           </para>
           <para>
+            Note that the caller function will automatically add standard VESA
+            DMT modes up to 1024x768 if the <methodname>get_modes</methodname>
+            helper operation returns no mode and if the connector status is
+            connector_status_connected. There is no need to call
+            <function>drm_add_edid_modes</function> manually in that case.
+          </para>
+          <para>
             When adding modes manually the driver creates each mode with a call to
             <function>drm_mode_create</function> and must fill the following fields.
             <itemizedlist>
@@ -2126,7 +2140,7 @@ void intel_crt_init(struct drm_device *dev)
             <function>drm_helper_probe_single_connector_modes</function>.
           </para>
           <para>
-            When parsing EDID data, <function>drm_add_edid_modes</function> fill the
+            When parsing EDID data, <function>drm_add_edid_modes</function> fills the
             connector <structfield>display_info</structfield>
             <structfield>width_mm</structfield> and
             <structfield>height_mm</structfield> fields. When creating modes
-- 
1.8.1.5