Flash 11.2 content displays in shades of green and purple only, and in a horizontally compressed space
John Hupp
jdhupp at prpcompany.com
Fri Oct 4 16:47:54 CEST 2013
On 10/4/2013 9:44 AM, Dieter Nützel wrote:
> Am 02.10.2013 21:20, schrieb John Hupp:
>> On 9/30/2013 7:36 AM, Daniel Vetter wrote:
>>> On Sat, Sep 28, 2013 at 12:49:24PM -0400, John Hupp wrote:
>>>> [I emailed the list with this same material on 9/13, but it has
>>>> received no response and someone on the Ubuntu kernel team suggested
>>>> that I change the email Subject from "Re: Moving a bug upstream per
>>>> downstream request, emailing the maintainers" to the more
>>>> descriptive one above.]
>>>>
>>>> When I emailed the maintainers with the report below on 8/15 (and
>>>> archived at
>>>> http://lists.freedesktop.org/archives/dri-devel/2013-August/043876.html),
>>>> a response came on 8/16:
>>>>
>>>> "It's a flash bug. They ignore the format of the Window that they
>>>> PutImage to. (Worse, they create an image of the right depth or else X
>>>> would reject the PutImage with a BadMatch and then render incorrect
>>>> pixel data into it.)"
>>>>
>>>> Despite that, someone on the Ubuntu kernel team asserted "at a
>>>> minimum a non-flash regression exists going from Quantal to Raring,"
>>>> and urged me to proceed with upstream kernel bisection.
>>>>
>>>> I finally finished that, and arrived at the result:
>>> Still a flash bug. This commit simply enables rgb555 in the kernel,
>>> which
>>> sna likes to use on gen2/3. Flash is just too dense and always presumes
>>> xrgb8888. Adding
>>>
>>> Section "Screen"
>>> Identifier "igd"
>>> DefaultDepth 24
>>> EndSection
>>>
>>> to your xorg.conf will work around.
>>> -Daniel
>>
>> *Thanks! That successfully works around the Flash problem with the
>> Intel driver/chipsets that I reported on. We have at least 4 of those
>> machines here.*
>
> Hello John,
>
> which 'special' Flash version are you running?
> I see that you have an Celeron so YOU can use the SSE2 enabled
> version, which I can't 'cause a have old Athlon/Duron without SSE2.
>
> Do you have to fiddle with
>
> /etc/vdpau_wrapper.cfg
> enable_flash_uv_swap=1
> disable_flash_pq_bg_color=1
> ?
>
> I can't get around the green and purple colors, but NO line distortion
> on my RV730 AGP, here.
>
> Any hints, Christian?
>
> Thank you for your insistence, John!
>
> -Dieter
I'm just using the current 11.2.x Flash installed by
flashplugin-installer from the standard Ubuntu repos.
I don't have to fiddle with anything you mentioned there.
On the face of it, though our cases share a symptom, your case varies
from mine in both the graphics driver (my Intel chipsets, your ATI
Radeon) and processor support. I don't know enough about these things
to assess whether the same bug and work-around apply.
>
>
>>>> 57779d06367a915ee03e6cb918d7575f0a46e419 is the first bad commit
>>>> commit 57779d06367a915ee03e6cb918d7575f0a46e419
>>>> Author: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>>> Date: Wed Oct 31 17:50:14 2012 +0200
>>>>
>>>> drm/i915: Fix display pixel format handling
>>>>
>>>> Fix support for all RGB/BGR pixel formats (except the
>>>> 16:16:16:16 float
>>>> format).
>>>>
>>>> Fix intel_init_framebuffer() to match hardware and driver
>>>> limitations:
>>>> * RGB332 is not supported at all
>>>> * CI8 is supported
>>>> * XRGB1555 & co. are supported on Gen3 and earlier
>>>> * XRGB210101010 & co. are supported from Gen4 onwards
>>>> * BGR formats are supported from Gen4 onwards
>>>> * YUV formats are supported from Gen5 onwards (driver limitation)
>>>>
>>>> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>>>> Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
>>>> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>>>>
>>>> :040000 040000 334e1536b3513d0c329a8bb6360593d12065b71d
>>>> bf0996ec13cbee07156c5e9f98dcdee30200e658 M drivers
>>>>
>>>> -------------------------------------
>>>>
>>>> The git bisect log:
>>>>
>>>> git bisect start
>>>> # good: [29594404d7fe73cd80eaa4ee8c43dcc53970c60e] Linux 3.7
>>>> git bisect good 29594404d7fe73cd80eaa4ee8c43dcc53970c60e
>>>> # bad: [9931faca02c604c22335f5a935a501bb2ace6e20] Linux 3.8-rc3
>>>> git bisect bad 9931faca02c604c22335f5a935a501bb2ace6e20
>>>> # good: [db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070] Merge tag 'dt' of
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
>>>> git bisect good db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070
>>>> # bad: [3c2e81ef344a90bb0a39d84af6878b4aeff568a2] Merge branch
>>>> 'drm-next' of git://people.freedesktop.org/~airlied/linux
>>>> git bisect bad 3c2e81ef344a90bb0a39d84af6878b4aeff568a2
>>>> # good: [d8c532c40721f7507896d202b8cae3b3642d2b0d] Merge branch
>>>> 'v4l_for_linus' of
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
>>>> git bisect good d8c532c40721f7507896d202b8cae3b3642d2b0d
>>>> # good: [2a74dbb9a86e8102dcd07d284135b4530a84826e] Merge branch
>>>> 'for-linus' of
>>>> git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
>>>> git bisect good 2a74dbb9a86e8102dcd07d284135b4530a84826e
>>>> # bad: [124ea297c8f0e0a3a567af0894fdbe05caaf80ec] drm/nouveau: unpin
>>>> pushbuffer bo before destroying it
>>>> git bisect bad 124ea297c8f0e0a3a567af0894fdbe05caaf80ec
>>>> # bad: [12f3382bc0262e981a2e58aca900cbbdbbe66825] drm/i915:
>>>> implement WaDisablePSDDualDispatchEnable on IVB & VLV
>>>> git bisect bad 12f3382bc0262e981a2e58aca900cbbdbbe66825
>>>> # good: [20474e90c948545c51da95689b8342a4f3bbaeb6] drm/i915: fix
>>>> checks inside ironlake_crtc_{enable, disable}
>>>> git bisect good 20474e90c948545c51da95689b8342a4f3bbaeb6
>>>> # good: [00c09d70df6b30c980f20facc1db3def3f5a637e] drm/i915: create
>>>> the DDI encoder
>>>> git bisect good 00c09d70df6b30c980f20facc1db3def3f5a637e
>>>> # bad: [a35f267946947b3798827a783d82d3d2aa55697d] drm/i915: remove
>>>> IBX code from lpt_enable_pch_transcoder
>>>> git bisect bad a35f267946947b3798827a783d82d3d2aa55697d
>>>> # bad: [9256aa195d3badd009bf4addee6c3ae39879b8a6] drm/i915: move
>>>> encoder->mode_set calls to crtc_mode_set
>>>> git bisect bad 9256aa195d3badd009bf4addee6c3ae39879b8a6
>>>> # good: [e7210c3c4f0d05e318b854bbd545fe335930c5cc] drm/i915: move
>>>> more pte encoding to pte encode
>>>> git bisect good e7210c3c4f0d05e318b854bbd545fe335930c5cc
>>>> # bad: [90f9a336f56318d4f21a29e8ef063cb70fe7dd11] drm/i915: Check
>>>> the framebuffer offset
>>>> git bisect bad 90f9a336f56318d4f21a29e8ef063cb70fe7dd11
>>>> # bad: [5d7bd705ddb362d5bd8ef2f3b294cd8f9d93c39e] drm/i915: Check
>>>> framebuffer stride more thoroughly
>>>> git bisect bad 5d7bd705ddb362d5bd8ef2f3b294cd8f9d93c39e
>>>> # bad: [57779d06367a915ee03e6cb918d7575f0a46e419] drm/i915: Fix
>>>> display pixel format handling
>>>> git bisect bad 57779d06367a915ee03e6cb918d7575f0a46e419
>>>>
>>>> -------------------------------------
>>>>
>>>> After finishing the kernel bisection, I also tested the new latest
>>>> mainline kernel (3.11.0-031100-generic, modified 9-2-13) and found
>>>> that it still suffers from the bug.
>>>>
>>>> Software Update also offered an updated version of the
>>>> Flashplugin-Installer (updating 11.2.202.297 to 11.2.202.310), but
>>>> that did not fix the problem either.
>>>>
>>>> -------------------------------------
>>>> THE ORIGINAL REPORT:
>>>>
>>>> [1.] One line summary of the problem:
>>>> Flash 11.2 content displays in shades of green and purple only, and
>>>> in a
>>>> horizontally compressed space
>>>>
>>>> [2.] Full description of the problem/report:
>>>> The full downstream bug report is at
>>>> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1212455 , but my
>>>> description from there:
>>>>
>>>> In my testing with the Intel driver using its default acceleration:
>>>> - Flash 11.2 works on Quantal with the 3.5 kernel
>>>> - Flash 11.2 works on Raring with the 3.5.0-17 kernel (though it boots
>>>> to a low-res desktop with a frozen pointer)
>>>> - Flash 11.2 works on Raring also with the 3.6.11-030611 or
>>>> 3.7.10-030710 mainline kernels
>>>> - Flash 11.8 works on Raring with the 3.8 kernel (in Chrome)
>>>> - Flash 11.2 fails on Raring with the 3.8 kernel
>>>> - Flash 11.2 fails on Raring with the latest mainline kernel,
>>>> 3.11.0-031100rc5
>>>> - Flash 11.2 fails on Saucy alpha 2 with its default kernel
>>>>
>>>> Disabling Flash *hardware* acceleration altogether (via R-click in the
>>>> Flash display window: Settings: General tab) did not fix the problem.
>>>>
>>>> WORKAROUND: Setting the Intel driver's acceleration method to UXA
>>>> rather
>>>> than its default SNA *always* fixes the Flash problem, but causes a
>>>> garbled login screen under LightDM that so far has no workaround.
>>>>
>>>> I also tried one possible fix for the default Intel SNA acceleration
>>>> using the TearFree option. I created
>>>> /etc/X11/xorg.conf.d/20-intel.conf
>>>> with contents:
>>>> Section "Device"
>>>> Identifier "Intel Graphics"
>>>> Driver "intel"
>>>> Option "AccelMethod" "sna"
>>>> Option "TearFree" "true"
>>>> EndSection
>>>> But this had no effect.
>>>>
>>>> [3.] Keywords (i.e., modules, networking, kernel):
>>>> I'm a newbie hanging on by my fingernails here -- I have no idea about
>>>> appropriate keywords.
>>>>
>>>> [4.] Kernel version (from /proc/version):
>>>> Linux version 3.11.0-031100rc5-generic (apw at gomeisa) (gcc version
>>>> 4.6.3
>>>> (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201308112135 SMP Mon Aug 12 01:44:44
>>>> UTC 2013
>>>>
>>>> [5.] Output of Oops.. message (if applicable) with symbolic
>>>> information
>>>> resolved (see Documentation/oops-tracing.txt)
>>>>
>>>> [6.] A small shell script or example program which triggers the
>>>> problem
>>>> (if possible)
>>>>
>>>> [7.] Environment
>>>> Description: Ubuntu 13.04
>>>> Release: 13.04
>>>>
>>>> [7.1.] Software (add the output of the ver_linux script here)
>>>> If some fields are empty or look unusual you may have an old version.
>>>> Compare to the current minimal requirements in Documentation/Changes.
>>>>
>>>> Linux Dimension 3.11.0-031100rc5-generic #201308112135 SMP Mon Aug 12
>>>> 01:44:44 UTC 2013 i686 i686 i686 GNU/Linux
>>>>
>>>> Gnu C
>>>> /usr/src/linux-headers-3.11.0-031100rc5-generic/scripts/ver_linux:
>>>> binutils
>>>> util-linux 2.20.1
>>>> mount support
>>>> module-init-tools 9
>>>> e2fsprogs 1.42.5
>>>> PPP 2.4.5
>>>> Linux C Library 2.17
>>>> Dynamic linker (ldd) 2.17
>>>> Procps 3.3.3
>>>> Net-tools 1.60
>>>> Kbd 1.15.5
>>>> Sh-utils 8.20
>>>> wireless-tools 30
>>>> Modules Loaded nls_iso8859_1 usb_storage snd_intel8x0
>>>> snd_ac97_codec ac97_bus bnep snd_pcm rfcomm bluetooth ppdev
>>>> snd_page_alloc gpio_ich snd_seq_midi snd_seq_midi_event snd_rawmidi
>>>> snd_seq dcdbas snd_seq_device i915 snd_timer video snd psmouse
>>>> drm_kms_helper serio_raw soundcore drm i2c_algo_bit parport_pc lpc_ich
>>>> shpchp lp mac_hid parport b44 ssb mii floppy
>>>>
>>>> [7.2.] Processor information (from /proc/cpuinfo):
>>>> processor : 0
>>>> vendor_id : GenuineIntel
>>>> cpu family : 15
>>>> model : 2
>>>> model name : Intel(R) Celeron(R) CPU 2.40GHz
>>>> stepping : 9
>>>> microcode : 0x17
>>>> cpu MHz : 2392.420
>>>> cache size : 128 KB
>>>> fdiv_bug : no
>>>> f00f_bug : no
>>>> coma_bug : no
>>>> fpu : yes
>>>> fpu_exception : yes
>>>> cpuid level : 2
>>>> wp : yes
>>>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
>>>> mca
>>>> cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs
>>>> bts
>>>> cid xtpr
>>>> bogomips : 4784.84
>>>> clflush size : 64
>>>> cache_alignment : 128
>>>> address sizes : 36 bits physical, 32 bits virtual
>>>> power management:
>>>>
>>>> [7.3.] Module information (from /proc/modules):
>>>> nls_iso8859_1 12617 1 - Live 0x00000000
>>>> usb_storage 48631 1 - Live 0x00000000
>>>> snd_intel8x0 33458 1 - Live 0x00000000
>>>> snd_ac97_codec 110295 1 snd_intel8x0, Live 0x00000000
>>>> ac97_bus 12642 1 snd_ac97_codec, Live 0x00000000
>>>> bnep 19143 2 - Live 0x00000000
>>>> snd_pcm 94597 2 snd_intel8x0,snd_ac97_codec, Live 0x00000000
>>>> rfcomm 58965 0 - Live 0x00000000
>>>> bluetooth 337841 10 bnep,rfcomm, Live 0x00000000
>>>> ppdev 17423 0 - Live 0x00000000
>>>> snd_page_alloc 18398 2 snd_intel8x0,snd_pcm, Live 0x00000000
>>>> gpio_ich 13278 0 - Live 0x00000000
>>>> snd_seq_midi 13132 0 - Live 0x00000000
>>>> snd_seq_midi_event 14475 1 snd_seq_midi, Live 0x00000000
>>>> snd_rawmidi 25157 1 snd_seq_midi, Live 0x00000000
>>>> snd_seq 55716 2 snd_seq_midi,snd_seq_midi_event, Live 0x00000000
>>>> dcdbas 14456 0 - Live 0x00000000
>>>> snd_seq_device 14137 3 snd_seq_midi,snd_rawmidi,snd_seq, Live
>>>> 0x00000000
>>>> i915 606994 2 - Live 0x00000000
>>>> snd_timer 28930 2 snd_pcm,snd_seq, Live 0x00000000
>>>> video 19046 1 i915, Live 0x00000000
>>>> snd 61270 10
>>>> snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer,
>>>>
>>>>
>>>> Live 0x00000000
>>>> psmouse 92607 0 - Live 0x00000000
>>>> drm_kms_helper 47306 1 i915, Live 0x00000000
>>>> serio_raw 13189 0 - Live 0x00000000
>>>> soundcore 12600 1 snd, Live 0x00000000
>>>> drm 247743 3 i915,drm_kms_helper, Live 0x00000000
>>>> i2c_algo_bit 13316 1 i915, Live 0x00000000
>>>> parport_pc 32114 1 - Live 0x00000000
>>>> lpc_ich 16987 0 - Live 0x00000000
>>>> shpchp 32265 0 - Live 0x00000000
>>>> lp 13359 0 - Live 0x00000000
>>>> mac_hid 13077 0 - Live 0x00000000
>>>> parport 40930 3 ppdev,parport_pc,lp, Live 0x00000000
>>>> b44 31223 0 - Live 0x00000000
>>>> ssb 56410 1 b44, Live 0x00000000
>>>> mii 13693 1 b44, Live 0x00000000
>>>> floppy 60183 0 - Live 0x00000000
>>>>
>>>> [7.4.] Loaded driver and hardware information (/proc/ioports,
>>>> /proc/iomem)
>>>> 0000-001f : dma1
>>>> 0020-0021 : pic1
>>>> 0040-0043 : timer0
>>>> 0050-0053 : timer1
>>>> 0060-0060 : keyboard
>>>> 0064-0064 : keyboard
>>>> 0070-007f : rtc0
>>>> 0080-008f : dma page reg
>>>> 00a0-00a1 : pic2
>>>> 00c0-00df : dma2
>>>> 00f0-00ff : fpu
>>>> 0170-0177 : 0000:00:1f.1
>>>> 0170-0177 : ata_piix
>>>> 01f0-01f7 : 0000:00:1f.1
>>>> 01f0-01f7 : ata_piix
>>>> 0376-0376 : 0000:00:1f.1
>>>> 0376-0376 : ata_piix
>>>> 0378-037a : parport0
>>>> 03f2-03f2 : floppy
>>>> 03f4-03f5 : floppy
>>>> 03f6-03f6 : 0000:00:1f.1
>>>> 03f6-03f6 : ata_piix
>>>> 03f7-03f7 : floppy
>>>> 03f8-03ff : serial
>>>> 0778-077a : parport0
>>>> 0800-0803 : ACPI PM1a_EVT_BLK
>>>> 0804-0805 : ACPI PM1a_CNT_BLK
>>>> 0808-080b : ACPI PM_TMR
>>>> 0810-0815 : ACPI CPU throttle
>>>> 0828-082f : ACPI GPE0_BLK
>>>> 0830-0833 : iTCO_wdt
>>>> 0860-087f : iTCO_wdt
>>>> 0880-08bf : gpio_ich
>>>> 0880-08bf : 0000:00:1f.0
>>>> 0c00-0c7f : pnp 00:0a
>>>> 0cf8-0cff : PCI conf1
>>>> d000-dfff : PCI Bus 0000:01
>>>> de00-deff : 0000:01:05.0
>>>> de08-de0f : serial
>>>> de10-de17 : serial
>>>> de18-de1f : serial
>>>> de20-de27 : serial
>>>> de28-de2f : serial
>>>> de60-de67 : serial
>>>> eda0-edbf : 0000:00:1f.3
>>>> edc0-edff : 0000:00:1f.5
>>>> edc0-edff : Intel 82801DB-ICH4
>>>> ee00-eeff : 0000:00:1f.5
>>>> ee00-eeff : Intel 82801DB-ICH4
>>>> ff40-ff5f : 0000:00:1d.2
>>>> ff40-ff5f : uhci_hcd
>>>> ff60-ff7f : 0000:00:1d.1
>>>> ff60-ff7f : uhci_hcd
>>>> ff80-ff9f : 0000:00:1d.0
>>>> ff80-ff9f : uhci_hcd
>>>> ffa0-ffaf : 0000:00:1f.1
>>>> ffa0-ffaf : ata_piix
>>>>
>>>> 00000000-00000fff : reserved
>>>> 00001000-0009ffff : System RAM
>>>> 000a0000-000bffff : Video RAM area
>>>> 000c0000-000cb7ff : Video ROM
>>>> 000cd000-000cffff : Adapter ROM
>>>> 000f0000-000fffff : reserved
>>>> 000f0000-000fffff : System ROM
>>>> 00100000-3f773fff : System RAM
>>>> 01000000-016691e2 : Kernel code
>>>> 016691e3-019bcfbf : Kernel data
>>>> 01aa1000-01b94fff : Kernel bss
>>>> 3f774000-3f775fff : ACPI Non-volatile Storage
>>>> 3f776000-3f796fff : ACPI Tables
>>>> 3f797000-3f7fffff : reserved
>>>> 3f800000-3fffffff : RAM buffer
>>>> e8000000-efffffff : 0000:00:02.0
>>>> f0000000-f7ffffff : 0000:00:00.0
>>>> fe900000-feafffff : PCI Bus 0000:01
>>>> fe9fd000-fe9fdfff : 0000:01:05.0
>>>> fe9fe000-fe9fffff : 0000:01:09.0
>>>> fe9fe000-fe9fffff : b44
>>>> fea00000-fea03fff : 0000:01:09.0
>>>> feb7f900-feb7f9ff : 0000:00:1f.5
>>>> feb7f900-feb7f9ff : Intel 82801DB-ICH4
>>>> feb7fa00-feb7fbff : 0000:00:1f.5
>>>> feb7fa00-feb7fbff : Intel 82801DB-ICH4
>>>> feb7fc00-feb7ffff : 0000:00:1f.1
>>>> feb80000-febfffff : 0000:00:02.0
>>>> fec00000-fec0ffff : reserved
>>>> fec00000-fec003ff : IOAPIC 0
>>>> fecf0000-fecf0fff : pnp 00:00
>>>> fee00000-fee0ffff : reserved
>>>> fee00000-fee0ffff : pnp 00:00
>>>> fee00000-fee00fff : Local APIC
>>>> ffa80800-ffa80bff : 0000:00:1d.7
>>>> ffa80800-ffa80bff : ehci_hcd
>>>> ffb00000-ffffffff : reserved
>>>> ffb00000-ffbfffff : pnp 00:00
>>>> ffc00000-ffffffff : pnp 00:00
>>>>
>>>> [7.5.] PCI information ('lspci -vvv' as root)
>>>> 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE
>>>> DRAM
>>>> Controller/Host-Hub Interface (rev 01)
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR+ FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort+ >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
>>>> Capabilities: [e4] Vendor Specific Information: Len=05 <?>
>>>> Kernel driver in use: agpgart-intel
>>>>
>>>> 00:02.0 VGA compatible controller: Intel Corporation
>>>> 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
>>>> (prog-if 00 [VGA controller])
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin A routed to IRQ 16
>>>> Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>>>> Region 1: Memory at feb80000 (32-bit, non-prefetchable)
>>>> [size=512K]
>>>> Expansion ROM at <unassigned> [disabled]
>>>> Capabilities: [d0] Power Management version 1
>>>> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
>>>> PME(D0-,D1-,D2-,D3hot-,D3cold-)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Kernel driver in use: i915
>>>>
>>>> 00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM
>>>> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00
>>>> [UHCI])
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin A routed to IRQ 16
>>>> Region 4: I/O ports at ff80 [size=32]
>>>> Kernel driver in use: uhci_hcd
>>>>
>>>> 00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM
>>>> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00
>>>> [UHCI])
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin B routed to IRQ 19
>>>> Region 4: I/O ports at ff60 [size=32]
>>>> Kernel driver in use: uhci_hcd
>>>>
>>>> 00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM
>>>> (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00
>>>> [UHCI])
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin C routed to IRQ 18
>>>> Region 4: I/O ports at ff40 [size=32]
>>>> Kernel driver in use: uhci_hcd
>>>>
>>>> 00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
>>>> USB2
>>>> EHCI Controller (rev 01) (prog-if 20 [EHCI])
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR+ FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin D routed to IRQ 23
>>>> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
>>>> Capabilities: [50] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
>>>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>>>> Capabilities: [58] Debug port: BAR=1 offset=0080
>>>> Kernel driver in use: ehci-pci
>>>>
>>>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
>>>> (prog-if
>>>> 00 [Normal decode])
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR+ FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort+
>>>> <TAbort- <MAbort- >SERR- <PERR+ INTx-
>>>> Latency: 0
>>>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>>>> I/O behind bridge: 0000d000-0000dfff
>>>> Memory behind bridge: fe900000-feafffff
>>>> Prefetchable memory behind bridge: fff00000-000fffff
>>>> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- <SERR- <PERR-
>>>> BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>>>> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>>>>
>>>> 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC
>>>> Interface Bridge (rev 01)
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR+ FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Kernel driver in use: lpc_ich
>>>>
>>>> 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller
>>>> (rev 01) (prog-if 8a [Master SecP PriP])
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin A routed to IRQ 18
>>>> Region 0: I/O ports at 01f0 [size=8]
>>>> Region 1: I/O ports at 03f4 [size=1]
>>>> Region 2: I/O ports at 0170 [size=8]
>>>> Region 3: I/O ports at 0374 [size=1]
>>>> Region 4: I/O ports at ffa0 [size=16]
>>>> Region 5: Memory at feb7fc00 (32-bit, non-prefetchable) [size=1K]
>>>> Kernel driver in use: ata_piix
>>>>
>>>> 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
>>>> SMBus Controller (rev 01)
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Interrupt: pin B routed to IRQ 3
>>>> Region 4: I/O ports at eda0 [size=32]
>>>>
>>>> 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
>>>> (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
>>>> Subsystem: Dell Device 0160
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR- FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 0
>>>> Interrupt: pin B routed to IRQ 17
>>>> Region 0: I/O ports at ee00 [size=256]
>>>> Region 1: I/O ports at edc0 [size=64]
>>>> Region 2: Memory at feb7fa00 (32-bit, non-prefetchable)
>>>> [size=512]
>>>> Region 3: Memory at feb7f900 (32-bit, non-prefetchable)
>>>> [size=256]
>>>> Capabilities: [50] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
>>>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Kernel driver in use: snd_intel8x0
>>>>
>>>> 01:05.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI
>>>> (rev 04) (prog-if 00 [Generic])
>>>> Subsystem: Dell Device 1000
>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>>>> ParErr-
>>>> Stepping+ SERR+ FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 64 bytes
>>>> Interrupt: pin A routed to IRQ 17
>>>> Region 0: Memory at fe9fd000 (32-bit, non-prefetchable) [size=4K]
>>>> Region 1: I/O ports at de00 [size=256]
>>>> Capabilities: [80] Power Management version 2
>>>> Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
>>>> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>>> Kernel driver in use: serial
>>>>
>>>> 01:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T
>>>> (rev 01)
>>>> Subsystem: Dell Device 8127
>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>>> ParErr-
>>>> Stepping- SERR+ FastB2B- DisINTx-
>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+
>>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>> Latency: 64
>>>> Interrupt: pin A routed to IRQ 17
>>>> Region 0: Memory at fe9fe000 (32-bit, non-prefetchable) [size=8K]
>>>> Expansion ROM at fea00000 [disabled] [size=16K]
>>>> Capabilities: [40] Power Management version 2
>>>> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
>>>> PME(D0+,D1+,D2+,D3hot+,D3cold+)
>>>> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>>>> Kernel driver in use: b44
>>>>
>>>> [7.6.] SCSI information (from /proc/scsi/scsi)
>>>> Attached devices:
>>>> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>>>> Vendor: ATA Model: WDC WD300EB-75CP Rev: 06.0
>>>> Type: Direct-Access ANSI SCSI revision: 05
>>>> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>>>> Vendor: SONY Model: DVD-ROM DDU1615 Rev: FDS1
>>>> Type: CD-ROM ANSI SCSI revision: 05
>>>> Host: scsi2 Channel: 00 Id: 00 Lun: 00
>>>> Vendor: Simple Model: Bonzai Xpress Rev: 0.00
>>>> Type: Direct-Access ANSI SCSI revision: 02
>>>>
>>>> [7.7.] Other information that might be relevant to the problem (please
>>>> look in /proc and include all information that you think to be
>>>> relevant):
>>>> ls /proc:
>>>>
>>>> 1
>>>> 10
>>>> 1007
>>>> 1016
>>>> 1018
>>>> 11
>>>> 1109
>>>> 12
>>>> 1220
>>>> 13
>>>> 1334
>>>> 135
>>>> 1381
>>>> 14
>>>> 1421
>>>> 1424
>>>> 1425
>>>> 1438
>>>> 1445
>>>> 1449
>>>> 1453
>>>> 1458
>>>> 1459
>>>> 1463
>>>> 1465
>>>> 1467
>>>> 1470
>>>> 1475
>>>> 1480
>>>> 1494
>>>> 15
>>>> 1509
>>>> 1511
>>>> 1516
>>>> 1523
>>>> 1526
>>>> 1529
>>>> 1541
>>>> 1546
>>>> 1550
>>>> 1564
>>>> 1566
>>>> 1571
>>>> 1586
>>>> 16
>>>> 1611
>>>> 1614
>>>> 1615
>>>> 1616
>>>> 1617
>>>> 1618
>>>> 1642
>>>> 1645
>>>> 1646
>>>> 1647
>>>> 17
>>>> 18
>>>> 19
>>>> 1944
>>>> 1952
>>>> 1962
>>>> 1970
>>>> 1981
>>>> 1989
>>>> 1992
>>>> 2
>>>> 20
>>>> 21
>>>> 22
>>>> 223
>>>> 224
>>>> 225
>>>> 23
>>>> 24
>>>> 25
>>>> 26
>>>> 27
>>>> 28
>>>> 29
>>>> 3
>>>> 30
>>>> 307
>>>> 318
>>>> 323
>>>> 4
>>>> 41
>>>> 43
>>>> 44
>>>> 46
>>>> 47
>>>> 5
>>>> 531
>>>> 66
>>>> 667
>>>> 67
>>>> 684
>>>> 687
>>>> 7
>>>> 706
>>>> 736
>>>> 759
>>>> 775
>>>> 8
>>>> 802
>>>> 885
>>>> 894
>>>> 9
>>>> 906
>>>> 910
>>>> 915
>>>> 951
>>>> 971
>>>> 983
>>>> 994
>>>> 996
>>>> 998
>>>> acpi
>>>> asound
>>>> buddyinfo
>>>> bus
>>>> cgroups
>>>> cmdline
>>>> consoles
>>>> cpuinfo
>>>> crypto
>>>> devices
>>>> diskstats
>>>> dma
>>>> dri
>>>> driver
>>>> execdomains
>>>> fb
>>>> filesystems
>>>> fs
>>>> interrupts
>>>> iomem
>>>> ioports
>>>> irq
>>>> kallsyms
>>>> kcore
>>>> key-users
>>>> kmsg
>>>> kpagecount
>>>> kpageflags
>>>> latency_stats
>>>> loadavg
>>>> locks
>>>> mdstat
>>>> meminfo
>>>> misc
>>>> modules
>>>> mounts
>>>> mtrr
>>>> net
>>>> pagetypeinfo
>>>> partitions
>>>> sched_debug
>>>> schedstat
>>>> scsi
>>>> self
>>>> slabinfo
>>>> softirqs
>>>> stat
>>>> swaps
>>>> sys
>>>> sysrq-trigger
>>>> sysvipc
>>>> timer_list
>>>> timer_stats
>>>> tty
>>>> uptime
>>>> version
>>>> vmallocinfo
>>>> vmstat
>>>> zoneinfo
>>>>
>>>> [X.] Other notes, patches, fixes, workarounds:
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel at lists.freedesktop.org
>>>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
>>>
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list