HPD flood warning since b8f102e8b

[Jiri Kosina]

On Thu, 24 Oct 2013, Egbert Eich wrote:

>  > >  > > Can you please attach full dmesg from boot up to the first WARN with
>  > >  > > drm.debug=0xe? This really shouldn't happen and indicates a bug
>  > >  > > somewhere ...
>  > >  > 
>  > >  > A bit difficult ... I originally thought that it was reliably 
>  > >  > reproducible, but now I didn't get it after 10 suspend/resume cycles. Will 
>  > >  > keep following it, and once it appears, will send you the dmesg.
>  > >  > 
>  > > Could you check if you get any messages regarding HPD storms after 
>  > > suspend/resume ie messages like:
>  > > "[drm] HPD interrupt storm detected on connector HDMI-A-1"
>  > > but without the annouing warn messages?
>  > 
>  > I have this:
>  > 
>  > [357128.184113] [drm] HPD interrupt storm detected on connector DP-3: switching from hotplug detection to polling
>  > 
>  > It appeared in the log approximately 5 seconds after resume has been 
>  > completed.
>  > 
> 
> :( You seem to get this on different connector.
> 
> Any chance for a 'lspci -n' output?

00:00.0 0600: 8086:2a40 (rev 07)
00:02.0 0300: 8086:2a42 (rev 07)
00:02.1 0380: 8086:2a43 (rev 07)
00:03.0 0780: 8086:2a44 (rev 07)
00:03.2 0101: 8086:2a46 (rev 07)
00:03.3 0700: 8086:2a47 (rev 07)
00:19.0 0200: 8086:10f5 (rev 03)
00:1a.0 0c03: 8086:2937 (rev 03)
00:1a.1 0c03: 8086:2938 (rev 03)
00:1a.2 0c03: 8086:2939 (rev 03)
00:1a.7 0c03: 8086:293c (rev 03)
00:1b.0 0403: 8086:293e (rev 03)
00:1c.0 0604: 8086:2940 (rev 03)
00:1c.1 0604: 8086:2942 (rev 03)
00:1c.3 0604: 8086:2946 (rev 03)
00:1d.0 0c03: 8086:2934 (rev 03)
00:1d.1 0c03: 8086:2935 (rev 03)
00:1d.2 0c03: 8086:2936 (rev 03)
00:1d.7 0c03: 8086:293a (rev 03)
00:1e.0 0604: 8086:2448 (rev 93)
00:1f.0 0601: 8086:2917 (rev 03)
00:1f.2 0106: 8086:2929 (rev 03)
00:1f.3 0c05: 8086:2930 (rev 03)
03:00.0 0280: 8086:4237

I (and the computer in question) am in Edinburgh till friday, in case 
someone wants to have a look.

-- 
Jiri Kosina
SUSE Labs