[PATCH 12/14] drm: Pass 'flags' from the caller to .get_scanout_position()

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Tue Oct 29 19:06:16 CET 2013


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Preparation for moving the early vblank IRQ logic into
radeon_get_crtc_scanoutpos().

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/drm_irq.c               | 2 +-
 drivers/gpu/drm/i915/i915_irq.c         | 3 ++-
 drivers/gpu/drm/radeon/radeon_display.c | 7 ++++---
 drivers/gpu/drm/radeon/radeon_mode.h    | 1 +
 drivers/gpu/drm/radeon/radeon_pm.c      | 2 +-
 include/drm/drmP.h                      | 2 ++
 6 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index b5c4d42..b39255f 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -585,7 +585,7 @@ int drm_calc_vbltimestamp_from_scanoutpos(struct drm_device *dev, int crtc,
 		/* Get vertical and horizontal scanout position vpos, hpos,
 		 * and bounding timestamps stime, etime, pre/post query.
 		 */
-		vbl_status = dev->driver->get_scanout_position(dev, crtc, &vpos,
+		vbl_status = dev->driver->get_scanout_position(dev, crtc, flags, &vpos,
 							       &hpos, &stime, &etime);
 
 		/* Get correction for CLOCK_MONOTONIC -> CLOCK_REALTIME if
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index f6b3206..70daf3c 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -657,7 +657,8 @@ static bool intel_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
 }
 
 static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
-			     int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
+				    unsigned int flags, int *vpos, int *hpos,
+				    ktime_t *stime, ktime_t *etime)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index ccd8751..3581570 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -305,7 +305,7 @@ void radeon_crtc_handle_flip(struct radeon_device *rdev, int crtc_id)
 	 * to complete in this vblank?
 	 */
 	if (update_pending &&
-	    (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id,
+	    (DRM_SCANOUTPOS_VALID & radeon_get_crtc_scanoutpos(rdev->ddev, crtc_id, 0,
 							       &vpos, &hpos, NULL, NULL)) &&
 	    ((vpos >= (99 * rdev->mode_info.crtcs[crtc_id]->base.hwmode.crtc_vdisplay)/100) ||
 	     (vpos < 0 && !ASIC_IS_AVIVO(rdev)))) {
@@ -1544,6 +1544,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  *
  * \param dev Device to query.
  * \param crtc Crtc to query.
+ * \param flags Flags from caller (DRM_CALLED_FROM_VBLIRQ or 0).
  * \param *vpos Location where vertical scanout position should be stored.
  * \param *hpos Location where horizontal scanout position should go.
  * \param *stime Target location for timestamp taken immediately before
@@ -1565,8 +1566,8 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  * unknown small number of scanlines wrt. real scanout position.
  *
  */
-int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, int *vpos, int *hpos,
-			       ktime_t *stime, ktime_t *etime)
+int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc, unsigned int flags,
+			       int *vpos, int *hpos, ktime_t *stime, ktime_t *etime)
 {
 	u32 stat_crtc = 0, vbl = 0, position = 0;
 	int vbl_start, vbl_end, vtotal, ret = 0;
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 3bfa910..c4016dc 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -758,6 +758,7 @@ extern int radeon_crtc_cursor_move(struct drm_crtc *crtc,
 				   int x, int y);
 
 extern int radeon_get_crtc_scanoutpos(struct drm_device *dev, int crtc,
+				      unsigned int flags,
 				      int *vpos, int *hpos, ktime_t *stime,
 				      ktime_t *etime);
 
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index 98bf63b..a394049 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1468,7 +1468,7 @@ static bool radeon_pm_in_vbl(struct radeon_device *rdev)
 	 */
 	for (crtc = 0; (crtc < rdev->num_crtc) && in_vbl; crtc++) {
 		if (rdev->pm.active_crtcs & (1 << crtc)) {
-			vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, &vpos, &hpos, NULL, NULL);
+			vbl_status = radeon_get_crtc_scanoutpos(rdev->ddev, crtc, 0, &vpos, &hpos, NULL, NULL);
 			if ((vbl_status & DRM_SCANOUTPOS_VALID) &&
 			    !(vbl_status & DRM_SCANOUTPOS_INVBL))
 				in_vbl = false;
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 14d4046..13c7942 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -840,6 +840,7 @@ struct drm_driver {
 	 *
 	 * \param dev  DRM device.
 	 * \param crtc Id of the crtc to query.
+	 * \param flags Flags from the caller (DRM_CALLED_FROM_VBLIRQ or 0).
 	 * \param *vpos Target location for current vertical scanout position.
 	 * \param *hpos Target location for current horizontal scanout position.
 	 * \param *stime Target location for timestamp taken immediately before
@@ -862,6 +863,7 @@ struct drm_driver {
 	 *
 	 */
 	int (*get_scanout_position) (struct drm_device *dev, int crtc,
+				     unsigned int flags,
 				     int *vpos, int *hpos, ktime_t *stime,
 				     ktime_t *etime);
 
-- 
1.8.1.5



More information about the dri-devel mailing list