[PATCH 7/9] drm/edid: Expose mandatory stereo modes for HDMI sinks

[Joakim Plate]

Damien Lespiau <damien.lespiau <at> intel.com> writes:

> +static const struct s3d_mandatory_mode s3d_mandatory_modes[] = {
> +	{ 1920, 1080, 24, 0,
> +	  DRM_MODE_FLAG_3D_TOP_AND_BOTTOM | DRM_MODE_FLAG_3D_FRAME_PACKING 
},
> +	{ 1920, 1080, 50, DRM_MODE_FLAG_INTERLACE,
> +	  DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF },
> +	{ 1920, 1080, 60, DRM_MODE_FLAG_INTERLACE,
> +	  DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF },
> +	{ 1280, 720,  50, 0,
> +	  DRM_MODE_FLAG_3D_TOP_AND_BOTTOM | DRM_MODE_FLAG_3D_FRAME_PACKING 
},
> +	{ 1280, 720,  60, 0,
> +	  DRM_MODE_FLAG_3D_TOP_AND_BOTTOM | DRM_MODE_FLAG_3D_FRAME_PACKING }
> +};


I may be missing something here... But..

The frame packed modes are much higher in pixels than this and include frame 
packing.
1080*2+45=2050
720*2+30=1470

Unless you intend to hide the left/right split in mesa or other place, we 
need to get the ability to render to both fields somehow.

Either as the full 2050 pixels high or at 1080*2 and the driver adds the 
blanking.

Also, some logic aught to indicate pixel aspect ratio for the modes since 
they are non square for the half res modes.

/Joakim