[PATCH 2/6] drm/radeon/dpm/btc: filter clocks based on voltage/clk dep tables

[Alex Deucher]

Filter out mclk and sclk levels higher than listed in the clk
voltage dependency tables.  Supporting these clocks will require
additional driver tweaking that isn't supported yet.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=68235

Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/radeon/btc_dpm.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c
index 0d0f065..b162e98 100644
--- a/drivers/gpu/drm/radeon/btc_dpm.c
+++ b/drivers/gpu/drm/radeon/btc_dpm.c
@@ -2097,6 +2097,7 @@ static void btc_apply_state_adjust_rules(struct radeon_device *rdev,
 	bool disable_mclk_switching;
 	u32 mclk, sclk;
 	u16 vddc, vddci;
+	u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
 
 	if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
 	    btc_dpm_vblank_too_short(rdev))
@@ -2138,6 +2139,39 @@ static void btc_apply_state_adjust_rules(struct radeon_device *rdev,
 			ps->low.vddci = max_limits->vddci;
 	}
 
+	/* limit clocks to max supported clocks based on voltage dependency tables */
+	btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk,
+							&max_sclk_vddc);
+	btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddci_dependency_on_mclk,
+							&max_mclk_vddci);
+	btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddc_dependency_on_mclk,
+							&max_mclk_vddc);
+
+	if (max_sclk_vddc) {
+		if (ps->low.sclk > max_sclk_vddc)
+			ps->low.sclk = max_sclk_vddc;
+		if (ps->medium.sclk > max_sclk_vddc)
+			ps->medium.sclk = max_sclk_vddc;
+		if (ps->high.sclk > max_sclk_vddc)
+			ps->high.sclk = max_sclk_vddc;
+	}
+	if (max_mclk_vddci) {
+		if (ps->low.mclk > max_mclk_vddci)
+			ps->low.mclk = max_mclk_vddci;
+		if (ps->medium.mclk > max_mclk_vddci)
+			ps->medium.mclk = max_mclk_vddci;
+		if (ps->high.mclk > max_mclk_vddci)
+			ps->high.mclk = max_mclk_vddci;
+	}
+	if (max_mclk_vddc) {
+		if (ps->low.mclk > max_mclk_vddc)
+			ps->low.mclk = max_mclk_vddc;
+		if (ps->medium.mclk > max_mclk_vddc)
+			ps->medium.mclk = max_mclk_vddc;
+		if (ps->high.mclk > max_mclk_vddc)
+			ps->high.mclk = max_mclk_vddc;
+	}
+
 	/* XXX validate the min clocks required for display */
 
 	if (disable_mclk_switching) {
-- 
1.8.3.1