[PATCH] drm/radeon/uvd: lower msg&fb buffer requirements on UVD3

Christian König deathsimple at vodafone.de
Mon Sep 23 00:42:32 PDT 2013


From: Christian König <christian.koenig at amd.com>

Starting with UVD3 message and feedback buffers have their
own 256MB segment, so no need to force them into VRAM any more.

Signed-off-by: Christian König <christian.koenig at amd.com>
---
 drivers/gpu/drm/radeon/radeon_cs.c  | 3 ++-
 drivers/gpu/drm/radeon/radeon_uvd.c | 3 +--
 drivers/gpu/drm/radeon/uvd_v1_0.c   | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index ac6ece6..1806f4d 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -85,8 +85,9 @@ static int radeon_cs_parser_relocs(struct radeon_cs_parser *p)
 		   VRAM, also but everything into VRAM on AGP cards to avoid
 		   image corruptions */
 		if (p->ring == R600_RING_TYPE_UVD_INDEX &&
+		    p->rdev->family < CHIP_PALM &&
 		    (i == 0 || p->rdev->flags & RADEON_IS_AGP)) {
-			/* TODO: is this still needed for NI+ ? */
+
 			p->relocs[i].lobj.domain =
 				RADEON_GEM_DOMAIN_VRAM;
 
diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index 1a01bbf..a0f1185 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -476,8 +476,7 @@ static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p,
 		return -EINVAL;
 	}
 
-	/* TODO: is this still necessary on NI+ ? */
-	if ((cmd == 0 || cmd == 0x3) &&
+	if (p->rdev->family < CHIP_PALM && (cmd == 0 || cmd == 0x3) &&
 	    (start >> 28) != (p->rdev->uvd.gpu_addr >> 28)) {
 		DRM_ERROR("msg/fb buffer %LX-%LX out of 256MB segment!\n",
 			  start, end);
diff --git a/drivers/gpu/drm/radeon/uvd_v1_0.c b/drivers/gpu/drm/radeon/uvd_v1_0.c
index 7266805..3100fa9 100644
--- a/drivers/gpu/drm/radeon/uvd_v1_0.c
+++ b/drivers/gpu/drm/radeon/uvd_v1_0.c
@@ -212,8 +212,8 @@ int uvd_v1_0_start(struct radeon_device *rdev)
 	/* enable VCPU clock */
 	WREG32(UVD_VCPU_CNTL,  1 << 9);
 
-	/* enable UMC */
-	WREG32_P(UVD_LMI_CTRL2, 0, ~(1 << 8));
+	/* enable UMC and NC0 */
+	WREG32_P(UVD_LMI_CTRL2, 1 << 13, ~((1 << 8) | (1 << 13)));
 
 	/* boot up the VCPU */
 	WREG32(UVD_SOFT_RESET, 0);
-- 
1.8.1.2



More information about the dri-devel mailing list