[RFC PATCH 4/4] ARM: dts: exynos4210-trats: add panel and dsi nodes

[Andrzej Hajda]

The patch adds mipi-dsi-exynos bus master node
and s6e8aa0 panel subnode to trats device.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>

Conflicts:
	arch/arm/boot/dts/exynos4210-trats.dts
---
 arch/arm/boot/dts/exynos4210-trats.dts | 54 ++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 94eebff..6f1a034 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -301,4 +301,58 @@
 			clock-frequency = <24000000>;
 		};
 	};
+
+	dsi_0: dsi at 11C80000 {
+		samsung,pll-stable-time = <500>;
+		samsung,stop-holding-count = <0x7ff>;
+		samsung,bta-timeout = <0xff>;
+		samsung,rx-timeout = <0xffff>;
+		samsung,pll-clk-freq = <24000000>;
+		samsung,cmd-allow = <0xf>;
+		vdd11-supply = <&vusb_reg>;
+		vdd18-supply = <&vmipi_reg>;
+		status = "okay";
+
+		fimd0_lcd: panel {
+			compatible = "samsung,s6e8aa0";
+			reset-gpio = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			vdd3-supply = <&vcclcd_reg>;
+			vci-supply = <&vlcd_reg>;
+			video-source = <&dsi_0>;
+			flip-horizontal;
+			flip-vertical;
+			samsung,panel-width-mm = <58>;
+			samsung,panel-height-mm = <103>;
+
+			display-timings {
+				native-mode = <&timing0>;
+
+				timing0: timing-0 {
+					clock-frequency = <0>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+		};
+	};
+
+	fimd at 11c00000 {
+		samsung,fimd-display = <&fimd0_lcd>;
+		samsung,fimd-vidout-rgb;
+		samsung,fimd-inv-vclk;
+		samsung,fimd-frame-rate = <60>;
+		samsung,default-window = <3>;
+		samsung,fimd-win-bpp = <32>;
+		status = "okay";
+	};
+
 };
-- 
1.8.1.2