[PATCH] drm/panel/ld9040: add power control sequence

[Andrzej Hajda]

Some ld9040 panels do not start without providing power control sequence
during initialization. The patch fixes the driver by providing such
sequence for all panels.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 drivers/gpu/drm/panel/panel-ld9040.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-ld9040.c
index 1f1f837..db1601f 100644
--- a/drivers/gpu/drm/panel/panel-ld9040.c
+++ b/drivers/gpu/drm/panel/panel-ld9040.c
@@ -27,6 +27,7 @@
 #define MCS_ELVSS_ON		0xb1
 #define MCS_USER_SETTING	0xf0
 #define MCS_DISPCTL		0xf2
+#define MCS_POWER_CTRL		0xf4
 #define MCS_GTCON		0xf7
 #define MCS_PANEL_CONDITION	0xf8
 #define MCS_GAMMA_SET1		0xf9
@@ -182,6 +183,8 @@ static void ld9040_init(struct ld9040 *ctx)
 	ld9040_dcs_write_seq_static(ctx, MCS_DISPCTL,
 		0x02, 0x08, 0x08, 0x10, 0x10);
 	ld9040_dcs_write_seq_static(ctx, MCS_MANPWR, 0x04);
+	ld9040_dcs_write_seq_static(ctx, MCS_POWER_CTRL,
+		0x0a, 0x87, 0x25, 0x6a, 0x44, 0x02, 0x88);
 	ld9040_dcs_write_seq_static(ctx, MCS_ELVSS_ON, 0x0d, 0x00, 0x16);
 	ld9040_dcs_write_seq_static(ctx, MCS_GTCON, 0x09, 0x00, 0x00);
 	ld9040_brightness_set(ctx);
-- 
1.8.3.2