[PATCH V2 3/9] drm/panel: Add driver for exynos_dp based panels

[Jingoo Han]

On Tuesday, April 22, 2014 7:39 AM, Ajay Kumar wrote:
> 
> This patch adds a simple driver to handle all the LCD and LED
> powerup/down routines needed to support eDP/eDP-LVDS panels
> supported on exynos boards.
> 
> The LCD and LED units are usually powered up via regulators,
> and almost on all boards, we will have a BL_EN pin to enable/
> disable the backlight. Sometimes, we can have LCD_EN switches
> as well. The routines in this driver can be used to control
> panel power sequence on such boards.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs at samsung.com>
> ---
> Changes since V1:
> 	Added routine for post_disable, removed few unwanted headers.
> 	Refactored a lot of code.
> 
>  .../devicetree/bindings/panel/exynos-dp-panel.txt  |   45 ++++
>  drivers/gpu/drm/panel/Kconfig                      |    9 +
>  drivers/gpu/drm/panel/Makefile                     |    1 +
>  drivers/gpu/drm/panel/panel-exynos-dp.c            |  251 ++++++++++++++++++++
>  4 files changed, 306 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/panel/exynos-dp-panel.txt
>  create mode 100644 drivers/gpu/drm/panel/panel-exynos-dp.c
> 
> diff --git a/Documentation/devicetree/bindings/panel/exynos-dp-panel.txt
> b/Documentation/devicetree/bindings/panel/exynos-dp-panel.txt
> new file mode 100644
> index 0000000..3fbca54
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/exynos-dp-panel.txt
> @@ -0,0 +1,45 @@
> +exynos_DP_panel/DP_to_LVDS_panel

Please fix it as below.

+Exynos DP panel/DP to LVDS panel

[....]

> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 4ec874d..ea9d5ac 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -30,4 +30,13 @@ config DRM_PANEL_S6E8AA0
>  	select DRM_MIPI_DSI
>  	select VIDEOMODE_HELPERS
> 
> +config DRM_PANEL_EXYNOS_DP
> +	tristate "support for DP panels"

It looks very general. Please fix it as below.

+	tristate "support for Exynos DP panels"

Best regards,
Jingoo Han

> +	depends on OF && DRM_PANEL && DRM_EXYNOS_DP
> +	help
> +	  DRM panel driver for DP panels and LVDS connected via DP bridges
> +	  that need at most a regulator for LCD unit, a regulator for LED unit
> +	  and/or enable GPIOs for LCD or LED units. Delay values can also be
> +	  specified to support powerup and powerdown process.
> +

[.....]