[PATCH] drm: Simplify fb refcounting rules around ->update_plane

[Ville Syrjälä]

On Tue, Apr 22, 2014 at 11:07:13AM +0200, Daniel Vetter wrote:
> The introduction of primary planes has apparently caused a bit of fb
> refcounting fun for people. That makes it a good time to clean up the
> arcane rules and slight differences between ->update_plane and
> ->set_config. The new rules are:
> 
> - The core holds a reference for both the new and the old fb (if their
>   non-NULL of course) while calling into the driver through either
>   ->update_plane or ->set_config.
> 
> - Drivers may not clobber plane->fb if their callback fails. If they
>   do that, they need to store a pointer to the old fb in it again.
>   When calling into the driver plane->fb still points at the current
>   (old) framebuffer.
> 
> - The core will update the plane->fb pointer on success. Drivers can
>   do that themselves too.
> 
> - The core will update fb refcounts for the plane->fb pointer,
>   presuming the drivers hold up their end of the bargain.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>  drivers/gpu/drm/drm_crtc.c         | 12 +++++-------
>  drivers/gpu/drm/drm_plane_helper.c | 15 ---------------
>  2 files changed, 5 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
> index d8b7099abece..966b480ed543 100644
> --- a/drivers/gpu/drm/drm_crtc.c
> +++ b/drivers/gpu/drm/drm_crtc.c
> @@ -2187,24 +2187,24 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
>  	}
>  
>  	drm_modeset_lock_all(dev);
> +	old_fb = plane->fb;
>  	ret = plane->funcs->update_plane(plane, crtc, fb,
>  					 plane_req->crtc_x, plane_req->crtc_y,
>  					 plane_req->crtc_w, plane_req->crtc_h,
>  					 plane_req->src_x, plane_req->src_y,
>  					 plane_req->src_w, plane_req->src_h);
>  	if (!ret) {
> -		old_fb = plane->fb;
>  		plane->crtc = crtc;
>  		plane->fb = fb;
> -		fb = NULL;
>  	}
>  	drm_modeset_unlock_all(dev);
>  
>  out:
> -	if (fb)
> -		drm_framebuffer_unreference(fb);
> +	if (plane->fb)
> +		drm_framebuffer_reference(old_fb);
                                          ^^^^^^

That doesn't look right.

Also you're now dereferencing plane->fb after you drop the locks.

Also i915 fb destruction seems buggy as we do
intel_fb->obj->framebuffer_references-- w/o holding struct_mutex.

>  	if (old_fb)
>  		drm_framebuffer_unreference(old_fb);
> +	drm_framebuffer_unreference(fb);
>  
>  	return ret;
>  }
> @@ -2239,9 +2239,7 @@ int drm_mode_set_config_internal(struct drm_mode_set *set)
>  	ret = crtc->funcs->set_config(set);
>  	if (ret == 0) {
>  		crtc->primary->crtc = crtc;
> -
> -		/* crtc->fb must be updated by ->set_config, enforces this. */
> -		WARN_ON(fb != crtc->primary->fb);
> +		crtc->primary->fb = fb;
>  	}
>  
>  	list_for_each_entry(tmp, &crtc->dev->mode_config.crtc_list, head) {
> diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
> index e768d35ff22e..8db129c44fea 100644
> --- a/drivers/gpu/drm/drm_plane_helper.c
> +++ b/drivers/gpu/drm/drm_plane_helper.c
> @@ -175,22 +175,7 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
>  	set.connectors = connector_list;
>  	set.num_connectors = num_connectors;
>  
> -	/*
> -	 * set_config() adjusts crtc->primary->fb; however the DRM setplane
> -	 * code that called us expects to handle the framebuffer update and
> -	 * reference counting; save and restore the current fb before
> -	 * calling it.
> -	 *
> -	 * N.B., we call set_config() directly here rather than using
> -	 * drm_mode_set_config_internal.  We're reprogramming the same
> -	 * connectors that were already in use, so we shouldn't need the extra
> -	 * cross-CRTC fb refcounting to accomodate stealing connectors.
> -	 * drm_mode_setplane() already handles the basic refcounting for the
> -	 * framebuffers involved in this operation.
> -	 */
> -	tmpfb = plane->fb;
>  	ret = crtc->funcs->set_config(&set);
> -	plane->fb = tmpfb;
>  
>  	kfree(connector_list);
>  	return ret;
> -- 
> 1.9.2
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC