[RFC v2 PATCH v4 09/14] ARM: dts: s6e3fa0: add DT bindings

[Thierry Reding]

On Wed, Apr 23, 2014 at 10:26:20AM +0900, YoungJun Cho wrote:
> Hi Andrzej
> 
> Thank you for comment.
> 
> On 04/22/2014 11:02 PM, Andrzej Hajda wrote:
> >On 04/21/2014 02:28 PM, YoungJun Cho wrote:
> >>This patch adds DT bindings for s6e3fa0 panel.
> >>The bindings describes panel resources, display timings and cpu timings.
> >>
> >>Changelog v2:
> >>- Adds unit address (commented by Sachin Kamat)
> >>Changelog v3:
> >>- Removes optional delay, size properties (commented by Laurent Pinchart)
> >>- Adds OLED detection, TE gpio properties
> >>Changelog v4:
> >>- Moves CPU timings relevant properties from FIMD DT
> >>   (commeted by Laurent Pinchart, Andrzej Hajda)
> >>
> >>Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
> >>Acked-by: Inki Dae <inki.dae at samsung.com>
> >>Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> >>---
> >>  .../devicetree/bindings/panel/samsung,s6e3fa0.txt  |   63 ++++++++++++++++++++
> >>  1 file changed, 63 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
> >>
> >>diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
> >>new file mode 100644
> >>index 0000000..9eeb38b
> >>--- /dev/null
> >>+++ b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
> >>@@ -0,0 +1,63 @@
> >>+Samsung S6E3FA0 AMOLED LCD 5.7 inch panel
> >>+
> >>+Required properties:
> >>+  - compatible: "samsung,s6e3fa0"
> >>+  - reg: the virtual channel number of a DSI peripheral
> >>+  - vdd3-supply: core voltage supply
> >>+  - vci-supply: voltage supply for analog circuits
> >>+  - reset-gpio: a GPIO spec for the reset pin
> >>+  - det-gpio: a GPIO spec for the OLED detection pin
> >>+  - te-gpio: a GPIO spec for the TE pin
> >
> >Just FYI, according to DT documentation [1] gpio spec should be in form
> >[name]-gpios, however there is plenty bindings with -gpio suffix, so I
> >am not sure if it is really enforced. On the other side it is enforced
> >by descriptor based gpio framework[2]. Integer-based gpio framework
> >used in your driver is obsolete according to [2].
> 
> Yes, you're right. That is my mistake.
> They should be attached 's'.
> At first I used integer-based gpio framework and replaced to descriptor
> based one, but did not updated DT bindings.

I've been working on a patch to support both *-gpios and *-gpio variants
with the GPIO descriptor framework. *-gpios makes sense if there can
indeed be several, but for something like hotplug detection I don't
think there's a reason to require the plural.

Furthermore some bindings already use the singular *-gpio anyway, so if
we ever want to convert drivers using those bindings to the GPIO
descriptor API we have to support that form too.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/dri-devel/attachments/20140423/57c30511/attachment-0001.sig>