[RFC v2 PATCH v3 10/14] drm/panel: add S6E3FA0 driver
YoungJun Cho
yj44.cho at samsung.com
Wed Apr 23 21:04:51 PDT 2014
Hi Andrzej,
Thank you for kind comments.
On 04/23/2014 07:16 PM, Andrzej Hajda wrote:
> Hi YoungJun,
>
>
> On 04/21/2014 02:28 PM, YoungJun Cho wrote:
>> This patch adds MIPI-DSI command mode based S6E3FA0 AMOLED LCD Panel driver.
>>
>> Changelog v2:
>> - Declares delay, size properties in probe routine instead of DT
>> Changelog v3:
>> - Moves CPU timings relevant properties from FIMD DT
>> (commented by Laurent Pinchart, Andrzej Hajda)
>>
>> Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
>> Acked-by: Inki Dae <inki.dae at samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>> drivers/gpu/drm/panel/Kconfig | 7 +
>> drivers/gpu/drm/panel/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-s6e3fa0.c | 569 +++++++++++++++++++++++++++++++++
>> 3 files changed, 577 insertions(+)
>> create mode 100644 drivers/gpu/drm/panel/panel-s6e3fa0.c
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index 4ec874d..be1392e 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -30,4 +30,11 @@ config DRM_PANEL_S6E8AA0
>> select DRM_MIPI_DSI
>> select VIDEOMODE_HELPERS
>>
>> +config DRM_PANEL_S6E3FA0
>> + tristate "S6E3FA0 DSI command mode panel"
>> + depends on DRM && DRM_PANEL
>> + depends on OF
>> + select DRM_MIPI_DSI
>> + select VIDEOMODE_HELPERS
>> +
>> endmenu
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index 8b92921..85c6738 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -1,3 +1,4 @@
>> obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
>> obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
>> obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
>> +obj-$(CONFIG_DRM_PANEL_S6E3FA0) += panel-s6e3fa0.o
>> diff --git a/drivers/gpu/drm/panel/panel-s6e3fa0.c b/drivers/gpu/drm/panel/panel-s6e3fa0.c
>> new file mode 100644
>> index 0000000..1282678
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-s6e3fa0.c
>> @@ -0,0 +1,569 @@
>> +/*
>> + * MIPI-DSI based s6e3fa0 AMOLED LCD 5.7 inch panel driver.
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
>> + *
>> + * YoungJun Cho <yj44.cho at samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include <drm/drmP.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_panel.h>
>> +
>> +#include <linux/gpio.h>
>> +#include <linux/of_gpio.h>
>
>
> #include <linux/gpio/consumer.h> should be enough.
Ok, I'll check.
>
>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/mipi_display.h>
>> +#include <video/of_videomode.h>
>> +#include <video/videomode.h>
>> +
>> +#define MTP_ID_LEN 3
>> +#define GAMMA_LEVEL_NUM 30
>> +
>> +struct s6e3fa0 {
>> + struct device *dev;
>> + struct drm_panel panel;
>> +
>> + struct regulator_bulk_data supplies[2];
>> + struct gpio_desc *reset_gpio;
>> + struct gpio_desc *det_gpio;
>> + struct gpio_desc *te_gpio;
>> + struct videomode vm;
>> + struct drm_panel_cpu_timings cpu_timings;
>> +
>> + unsigned int power_on_delay;
>> + unsigned int reset_delay;
>> + unsigned int init_delay;
>> + unsigned int width_mm;
>> + unsigned int height_mm;
>> +
>> + unsigned char id;
>> + unsigned char vddm;
>> + unsigned int brightness;
>> +};
>> +
>> +#define panel_to_s6e3fa0(p) container_of(p, struct s6e3fa0, panel)
>> +
>> +static const unsigned char s6e3fa0_vddm_lut[][2] = {
>> + {0x00, 0x0d}, {0x01, 0x0d}, {0x02, 0x0e}, {0x03, 0x0f}, {0x04, 0x10},
>> + {0x05, 0x11}, {0x06, 0x12}, {0x07, 0x13}, {0x08, 0x14}, {0x09, 0x15},
>> + {0x0a, 0x16}, {0x0b, 0x17}, {0x0c, 0x18}, {0x0d, 0x19}, {0x0e, 0x1a},
>> + {0x0f, 0x1b}, {0x10, 0x1c}, {0x11, 0x1d}, {0x12, 0x1e}, {0x13, 0x1f},
>> + {0x14, 0x20}, {0x15, 0x21}, {0x16, 0x22}, {0x17, 0x23}, {0x18, 0x24},
>> + {0x19, 0x25}, {0x1a, 0x26}, {0x1b, 0x27}, {0x1c, 0x28}, {0x1d, 0x29},
>> + {0x1e, 0x2a}, {0x1f, 0x2b}, {0x20, 0x2c}, {0x21, 0x2d}, {0x22, 0x2e},
>> + {0x23, 0x2f}, {0x24, 0x30}, {0x25, 0x31}, {0x26, 0x32}, {0x27, 0x33},
>> + {0x28, 0x34}, {0x29, 0x35}, {0x2a, 0x36}, {0x2b, 0x37}, {0x2c, 0x38},
>> + {0x2d, 0x39}, {0x2e, 0x3a}, {0x2f, 0x3b}, {0x30, 0x3c}, {0x31, 0x3d},
>> + {0x32, 0x3e}, {0x33, 0x3f}, {0x34, 0x3f}, {0x35, 0x3f}, {0x36, 0x3f},
>> + {0x37, 0x3f}, {0x38, 0x3f}, {0x39, 0x3f}, {0x3a, 0x3f}, {0x3b, 0x3f},
>> + {0x3c, 0x3f}, {0x3d, 0x3f}, {0x3e, 0x3f}, {0x3f, 0x3f}, {0x40, 0x0c},
>> + {0x41, 0x0b}, {0x42, 0x0a}, {0x43, 0x09}, {0x44, 0x08}, {0x45, 0x07},
>> + {0x46, 0x06}, {0x47, 0x05}, {0x48, 0x04}, {0x49, 0x03}, {0x4a, 0x02},
>> + {0x4b, 0x01}, {0x4c, 0x40}, {0x4d, 0x41}, {0x4e, 0x42}, {0x4f, 0x43},
>> + {0x50, 0x44}, {0x51, 0x45}, {0x52, 0x46}, {0x53, 0x47}, {0x54, 0x48},
>> + {0x55, 0x49}, {0x56, 0x4a}, {0x57, 0x4b}, {0x58, 0x4c}, {0x59, 0x4d},
>> + {0x5a, 0x4e}, {0x5b, 0x4f}, {0x5c, 0x50}, {0x5d, 0x51}, {0x5e, 0x52},
>> + {0x5f, 0x53}, {0x60, 0x54}, {0x61, 0x55}, {0x62, 0x56}, {0x63, 0x57},
>> + {0x64, 0x58}, {0x65, 0x59}, {0x66, 0x5a}, {0x67, 0x5b}, {0x68, 0x5c},
>> + {0x69, 0x5d}, {0x6a, 0x5e}, {0x6b, 0x5f}, {0x6c, 0x60}, {0x6d, 0x61},
>> + {0x6e, 0x62}, {0x6f, 0x63}, {0x70, 0x64}, {0x71, 0x65}, {0x72, 0x66},
>> + {0x73, 0x67}, {0x74, 0x68}, {0x75, 0x69}, {0x76, 0x6a}, {0x77, 0x6b},
>> + {0x78, 0x6c}, {0x79, 0x6d}, {0x7a, 0x6e}, {0x7b, 0x6f}, {0x7c, 0x70},
>> + {0x7d, 0x71}, {0x7e, 0x72}, {0x7f, 0x73},
>> +};
>
>
> Some comment would be helpful.
Okay.
>
>
>> +
>> +static int s6e3fa0_dcs_read(struct s6e3fa0 *ctx, unsigned char cmd,
>> + void *data, size_t len)
>> +{
>> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> +
>> + return mipi_dsi_dcs_read(dsi, dsi->channel, cmd, data, len);
>> +}
>> +
>> +static void s6e3fa0_dcs_write(struct s6e3fa0 *ctx, const void *data, size_t len)
>> +{
>> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> +
>> + mipi_dsi_dcs_write(dsi, dsi->channel, data, len);
>> +}
>> +
>> +#define s6e3fa0_dcs_write_seq(ctx, seq...) \
>> +do { \
>> + const unsigned char d[] = { seq }; \
>> + BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, "too big seq for stack"); \
>> + s6e3fa0_dcs_write(ctx, d, ARRAY_SIZE(d)); \
>> +} while (0)
>> +
>> +#define s6e3fa0_dcs_write_seq_static(ctx, seq...) \
>> +do { \
>> + static const unsigned char d[] = { seq }; \
>> + s6e3fa0_dcs_write(ctx, d, ARRAY_SIZE(d)); \
>> +} while (0)
>> +
>> +static void s6e3fa0_apply_level_1_key(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xf0, 0x5a, 0x5a);
>> +}
>> +
>> +static void s6e3fa0_apply_level_2_key(struct s6e3fa0 *ctx, bool on)
>> +{
>> + if (on)
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xfc, 0x5a, 0x5a);
>> + else
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xfc, 0xa5, 0xa5);
>> +}
>> +
>> +static void s6e3fa0_set_maximum_return_packet_size(struct s6e3fa0 *ctx,
>> + unsigned int size)
>> +{
>> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> + const struct mipi_dsi_host_ops *ops = dsi->host->ops;
>> +
>> + if (ops && ops->transfer) {
>> + unsigned char buf[] = {size, 0};
>> + struct mipi_dsi_msg msg = {
>> + .channel = dsi->channel,
>> + .type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
>> + .tx_len = sizeof(buf),
>> + .tx_buf = buf
>> + };
>> +
>> + ops->transfer(dsi->host, &msg);
>> + }
>> +}
>> +
>> +static void s6e3fa0_read_mtp_id(struct s6e3fa0 *ctx)
>> +{
>> + unsigned char id[MTP_ID_LEN];
>> + int ret;
>> +
>> + s6e3fa0_set_maximum_return_packet_size(ctx, MTP_ID_LEN);
>> + ret = s6e3fa0_dcs_read(ctx, 0x04, id, MTP_ID_LEN);
>> + if (ret < MTP_ID_LEN || id[0] == 0x00) {
>> + dev_err(ctx->dev, "failed to read id\n");
>> + return;
>> + }
>> +
>> + dev_info(ctx->dev, "ID: 0x%02x, 0x%02x, 0x%02x\n", id[0], id[1], id[2]);
>> +
>> + ctx->id = id[2];
>> +}
>> +
>> +static void s6e3fa0_read_vddm(struct s6e3fa0 *ctx)
>> +{
>> + unsigned char vddm;
>> + int ret;
>> +
>> + s6e3fa0_apply_level_2_key(ctx, true);
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xb0, 0x16);
>
> It seems little bit cryptic, it would be better to document somehow
> what this sequence is for. I guess datasheet provides at least
> information what first byte means and standard says clearly that it is
> DCS for values < 0xb0 and MCS (manufacturer command set) for values >=
> 0xb0. You can use defines to make it more readable. Please look at
> panel-ld9040.c how it could be done.
>
> s6e3fa0_dcs_write_seq_static(ctx, MCS_MANPWR, 0x16);
>
> looks better. The same for other sequences.
Okay, I'll fix it.
We need to update panel-s6e8aa0 also before long.
>
>
>> + s6e3fa0_set_maximum_return_packet_size(ctx, 1);
>> + ret = s6e3fa0_dcs_read(ctx, 0xd7, &vddm, 1);
>> + s6e3fa0_apply_level_2_key(ctx, false);
>> +
>> + if (ret < 1 || vddm > 0x7f) {
>> + dev_err(ctx->dev, "failed to read vddm\n");
>> + return;
>> + }
>> +
>> + ctx->vddm = s6e3fa0_vddm_lut[vddm][1];
>
> In case of error ctx->vddm is zero, and this value is used later by
> s6e3fa0_set_etc_and_write_vddm. Is it OK?
Right, I have to reinforce this.
>
> Anyway it seems you do not care about DSI transmission errors at all in
> most places. Maybe it will not hurt but IMO it is asking for troubles.
ditto
>
>
>> +}
>> +
>> +static void s6e3fa0_set_pentile_control(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xc0, 0x00, 0x02, 0x03, 0x32, 0x03,
>> + 0x44, 0x44, 0xc0, 0x00, 0x1c, 0x20, 0xe8);
>> +}
>> +
>> +static void s6e3fa0_write_als(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xe3, 0xff, 0xff, 0xff, 0xff);
>> +}
>> +
>> +static void s6e3fa0_set_readability_enhancement(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xfe, 0x00, 0x03, 0xb0, 0x2b, 0xfe,
>> + 0xe4);
>> +}
>> +
>> +static void s6e3fa0_set_common_control(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_set_pentile_control(ctx);
>> + s6e3fa0_write_als(ctx);
>> + s6e3fa0_set_readability_enhancement(ctx);
>> +}
>> +
>> +static void s6e3fa0_set_gamma(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xca, 0x01, 0x00, 0x01, 0x00, 0x01,
>> + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
>> + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
>> + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
>> + 0x00, 0x80, 0x80, 0x80, 0x80, 0x80,
>> + 0x00, 0x00, 0x00);
>> +}
>> +
>> +static void s6e3fa0_set_aid(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xb2, 0x00, 0x06, 0x00, 0x06);
>> +}
>> +
>> +static void s6e3fa0_set_elvss(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xb6, 0x88, 0x0a);
>> +}
>> +
>> +static void s6e3fa0_update_panel(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xf7, 0x03);
>> +}
>> +
>> +static void s6e3fa0_write_acl(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0x55, 0x02);
>
>
> That's strange beast. It should be DCS command but I do not see it in
> spec. Specification violation???
Uhm, I referred s6e3fa0 data sheet.
The 0x55 command is used to set parameters for Automatic Current Limit
functionality.
I'll explain in more detail by comment.
>
>
>> +}
>> +
>> +static void s6e3fa0_set_brightness_control(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_set_gamma(ctx);
>> + s6e3fa0_set_aid(ctx);
>> + s6e3fa0_set_elvss(ctx);
>> + s6e3fa0_update_panel(ctx);
>> + s6e3fa0_write_acl(ctx);
>> +}
>> +
>> +static void s6e3fa0_set_temperature(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0xb0, 0x05, 0xb8, 0x19);
>> +}
>> +
>> +static void s6e3fa0_set_elvss_control(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_set_temperature(ctx);
>> + s6e3fa0_set_elvss(ctx);
>> +}
>> +
>> +static void s6e3fa0_set_te_on(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_dcs_write_seq_static(ctx, 0x35, 0x00);
>
>
> s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_TEAR_ON, 0x00);
>
>
>> +}
>> +
>> +static void s6e3fa0_set_etc_and_write_vddm(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_apply_level_2_key(ctx, true);
>> + s6e3fa0_dcs_write_seq(ctx, 0xed, 0x0c, 0x04, 0xff, 0x01, 0xb0, 0x16,
>> + 0xd7, ctx->vddm);
>> + s6e3fa0_apply_level_2_key(ctx, false);
>> +}
>> +
>> +static void s6e3fa0_set_etc_condition(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_set_te_on(ctx);
>> + s6e3fa0_set_etc_and_write_vddm(ctx);
>> +}
>> +
>> +static void s6e3fa0_panel_init(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_set_common_control(ctx);
>> + s6e3fa0_set_brightness_control(ctx);
>> + s6e3fa0_set_elvss_control(ctx);
>> + s6e3fa0_set_etc_condition(ctx);
>> +
>> + msleep(ctx->init_delay);
>> +}
>> +
>> +static int s6e3fa0_power_off(struct s6e3fa0 *ctx)
>> +{
>> + gpiod_set_value(ctx->reset_gpio, 0);
>> +
>> + return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> +}
>> +
>> +static int s6e3fa0_power_on(struct s6e3fa0 *ctx)
>> +{
>> + int ret;
>> +
>> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> + if (ret)
>> + return ret;
>> +
>> + msleep(ctx->power_on_delay);
>> +
>> + gpiod_set_value(ctx->reset_gpio, 1);
>> + gpiod_set_value(ctx->reset_gpio, 0);
>> + usleep_range(1000, 2000);
>> + gpiod_set_value(ctx->reset_gpio, 1);
>> +
>> + msleep(ctx->reset_delay);
>> +
>> + return 0;
>> +}
>> +
>> +static void s6e3fa0_set_sequence(struct s6e3fa0 *ctx)
>> +{
>> + s6e3fa0_apply_level_1_key(ctx);
>> + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_EXIT_SLEEP_MODE);
>> + msleep(20);
>> +
>> + s6e3fa0_read_mtp_id(ctx);
>> + s6e3fa0_read_vddm(ctx);
>> +
>> + s6e3fa0_panel_init(ctx);
>> +
>> + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_ON);
>> +}
>> +
>> +static int s6e3fa0_disable(struct drm_panel *panel)
>> +{
>> + struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel);
>> +
>> + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE);
>> + s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_OFF);
>> + msleep(35);
>> +
>> + return s6e3fa0_power_off(ctx);
>> +}
>> +
>> +static int s6e3fa0_enable(struct drm_panel *panel)
>> +{
>> + struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel);
>> + int ret;
>> +
>> + ret = s6e3fa0_power_on(ctx);
>> + if (ret)
>> + return ret;
>> +
>> + s6e3fa0_set_sequence(ctx);
>> +
>> + return ret;
>> +}
>> +
>> +static int s6e3fa0_get_modes(struct drm_panel *panel)
>> +{
>> + struct drm_connector *connector = panel->connector;
>> + struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel);
>> + struct drm_display_mode *mode;
>> +
>> + mode = drm_mode_create(connector->dev);
>> + if (!mode) {
>> + DRM_ERROR("failed to create a new display mode\n");
>> + return 0;
>> + }
>> +
>> + drm_display_mode_from_videomode(&ctx->vm, mode);
>> + mode->width_mm = ctx->width_mm;
>> + mode->height_mm = ctx->height_mm;
>> + connector->display_info.width_mm = mode->width_mm;
>> + connector->display_info.height_mm = mode->height_mm;
>> +
>> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>> + mode->private = (void *)&ctx->cpu_timings;
>> + drm_mode_probed_add(connector, mode);
>> +
>> + return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs s6e3fa0_drm_funcs = {
>> + .disable = s6e3fa0_disable,
>> + .enable = s6e3fa0_enable,
>> + .get_modes = s6e3fa0_get_modes,
>> +};
>> +
>> +static int s6e3fa0_parse_dt(struct s6e3fa0 *ctx)
>> +{
>> + struct device *dev = ctx->dev;
>> + struct device_node *np = dev->of_node, *cpu_timing_np;
>> + struct drm_panel_cpu_timings *cpu_timings = &ctx->cpu_timings;
>> + int ret;
>> +
>> + ret = of_get_videomode(np, &ctx->vm, 0);
>> + if (ret) {
>> + dev_err(dev, "failed to get video mode: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + cpu_timing_np = of_find_node_by_name(np, "cpu-timings");
>> + if (!cpu_timing_np) {
>> + dev_err(dev, "failed to get cpu timings\n");
>> + return -EINVAL;
>> + }
>> + if (of_property_read_u32(cpu_timing_np, "cs-setup",
>> + &cpu_timings->cs_setup))
>> + cpu_timings->cs_setup = 0;
>> + if (of_property_read_u32(cpu_timing_np, "wr-setup",
>> + &cpu_timings->wr_setup))
>> + cpu_timings->wr_setup = 0;
>> + if (of_property_read_u32(cpu_timing_np, "wr-act",
>> + &cpu_timings->wr_act))
>> + cpu_timings->wr_act = 1;
>> + if (of_property_read_u32(cpu_timing_np, "wr-hold",
>> + &cpu_timings->wr_hold))
>> + cpu_timings->wr_hold = 0;
>
> If I remember default values were not provided in bindings, please fix it.
Okay
>
>
>> + of_node_put(cpu_timing_np);
>> +
>> + return 0;
>> +}
>> +
>> +irqreturn_t s6e3fa0_det_interrupt(int irq, void *dev_id)
>> +{
>> + /* TODO */
>> + return IRQ_HANDLED;
>> +}
>> +
>> +irqreturn_t s6e3fa0_te_interrupt(int irq, void *dev_id)
>> +{
>> + struct s6e3fa0 *ctx = dev_id;
>> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> + struct mipi_dsi_host *host = dsi->host;
>> + const struct mipi_dsi_host_ops *ops = host->ops;
>> +
>> + if (ops && ops->te_handler)
>> + ops->te_handler(host);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int s6e3fa0_probe(struct mipi_dsi_device *dsi)
>> +{
>> + struct device *dev = &dsi->dev;
>> + struct s6e3fa0 *ctx;
>> + int ret;
>> +
>> + ctx = devm_kzalloc(dev, sizeof(struct s6e3fa0), GFP_KERNEL);
>> + if (!ctx) {
>> + dev_err(dev, "failed to allocate s6e3fa0 structure.\n");
>> + return -ENOMEM;
>> + }
>> +
>> + mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> + ctx->dev = dev;
>> +
>> + dsi->lanes = 4;
>> + dsi->format = MIPI_DSI_FMT_RGB888;
>> +
>> + ret = s6e3fa0_parse_dt(ctx);
>> + if (ret)
>> + return ret;
>> +
>> + ctx->supplies[0].supply = "vdd3";
>> + ctx->supplies[1].supply = "vci";
>> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
>> + ctx->supplies);
>> + if (ret) {
>> + dev_err(dev, "failed to get regulators: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ctx->reset_gpio = devm_gpiod_get(dev, "reset");
>> + if (IS_ERR(ctx->reset_gpio)) {
>> + dev_err(dev, "failed to get reset gpio: %ld\n",
>> + PTR_ERR(ctx->reset_gpio));
>> + return PTR_ERR(ctx->reset_gpio);
>> + }
>> + ret = gpiod_direction_output(ctx->reset_gpio, 1);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to configure reset gpio: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ctx->det_gpio = devm_gpiod_get(dev, "det");
>> + if (IS_ERR(ctx->det_gpio)) {
>> + dev_err(dev, "failed to get det gpio: %ld\n",
>> + PTR_ERR(ctx->det_gpio));
>> + return PTR_ERR(ctx->det_gpio);
>> + }
>> + ret = gpiod_direction_input(ctx->det_gpio);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to configure det gpio: %d\n", ret);
>> + return ret;
>> + }
>> + ret = devm_request_irq(dev, gpiod_to_irq(ctx->det_gpio),
>> + s6e3fa0_det_interrupt,
>> + IRQF_TRIGGER_FALLING,
>> + "oled-det", ctx);
>> + if (ret) {
>> + dev_err(dev, "failed to request det irq: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ctx->te_gpio = devm_gpiod_get(dev, "te");
>> + if (IS_ERR(ctx->te_gpio)) {
>> + dev_err(dev, "failed to get te gpio: %ld\n",
>> + PTR_ERR(ctx->te_gpio));
>> + return PTR_ERR(ctx->te_gpio);
>> + }
>> + ret = gpiod_direction_input(ctx->te_gpio);
>> + if (ret < 0) {
>> + dev_err(dev, "failed to configure te gpio: %d\n", ret);
>> + return ret;
>> + }
>> + ret = devm_request_irq(dev, gpiod_to_irq(ctx->te_gpio),
>> + s6e3fa0_te_interrupt,
>> + IRQF_TRIGGER_RISING,
>> + "TE", ctx);
>> + if (ret) {
>> + dev_err(dev, "failed to request det irq: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ctx->power_on_delay = 10;
>> + ctx->reset_delay = 5;
>> + ctx->init_delay = 120;
>> + ctx->width_mm = 71;
>> + ctx->height_mm = 126;
>> +
>> + ctx->brightness = GAMMA_LEVEL_NUM - 1;
>> +
>> + drm_panel_init(&ctx->panel);
>> + ctx->panel.dev = dev;
>> + ctx->panel.funcs = &s6e3fa0_drm_funcs;
>> +
>> + ret = drm_panel_add(&ctx->panel);
>> + if (ret)
>> + return ret;
>> +
>> + ret = mipi_dsi_attach(dsi);
>> + if (ret)
>> + drm_panel_remove(&ctx->panel);
>> +
>> + return ret;
>> +}
>> +
>> +static int s6e3fa0_remove(struct mipi_dsi_device *dsi)
>> +{
>> + struct s6e3fa0 *ctx = mipi_dsi_get_drvdata(dsi);
>> +
>> + s6e3fa0_power_off(ctx);
>
>
> In case panel is off this will lead to double disable of regulators.
>
> In general mipi_dsi_detach should be enough, it will trigger hpd,
> which will set dpms to off, which will call s6e3fa0_power_off.
Okay, I'll check again.
Thank you.
Best regards YJ
>
>
> Regards
> Andrzej
>
>
>> +
>> + mipi_dsi_detach(dsi);
>> + drm_panel_remove(&ctx->panel);
>> +
>> + return 0;
>> +}
>> +
>> +static struct of_device_id s6e3fa0_of_match[] = {
>> + { .compatible = "samsung,s6e3fa0" },
>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(of, s6e3fa0_of_match);
>> +
>> +static struct mipi_dsi_driver s6e3fa0_driver = {
>> + .probe = s6e3fa0_probe,
>> + .remove = s6e3fa0_remove,
>> + .driver = {
>> + .name = "panel_s6e3fa0",
>> + .owner = THIS_MODULE,
>> + .of_match_table = s6e3fa0_of_match,
>> + },
>> +};
>> +module_mipi_dsi_driver(s6e3fa0_driver);
>> +
>> +MODULE_AUTHOR("YoungJun Cho <yj44.cho at samsung.com>");
>> +MODULE_DESCRIPTION("MIPI-DSI based s6e3fa0 AMOLED LCD Panel Driver");
>> +MODULE_LICENSE("GPL v2");
>>
>
>
More information about the dri-devel
mailing list