[RFC v3 PATCH v2 10/16] drm/exynos: dsi: add driver data to support Exynos5420

[YoungJun Cho]

Hi Sachin,

Thank you for comment.

I'll fix.

Thank you.
Best regards YJ

On 04/30/2014 12:26 AM, Sachin Kamat wrote:
> On 27 April 2014 07:20, YoungJun Cho <yj44.cho at samsung.com> wrote:
>> The offset of register DSIM_PLLTMR_REG in Exynos5420 is different
>> from the one in Exynos4 SoC.
>>
>> In case of Exynos5420 SoC, there is no frequency band bit in DSIM_PLLCTRL_REG,
>> and it uses DSIM_PHYCTRL_REG and DSIM_PHYTIMING*_REG instead.
>> So this patch adds driver data to distinguish it.
>>
>> Changelog v2:
>> - Moves exynos_dsi_enable_clocks() after exynos_dsi_reset()
>>    (commented by Andrzej Hajda)
>> - Splits D-PHY control setting routines from PLL setting one
>>    (commented by Andrzej Hajda)
>>
>> Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
>> Acked-by: Inki Dae <inki.dae at samsung.com>
>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>>   drivers/gpu/drm/exynos/exynos_drm_dsi.c |  154 ++++++++++++++++++++++++++-----
>>   1 file changed, 132 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> index 4a918ec..c18dba3 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>> @@ -17,6 +17,7 @@
>>
>>   #include <linux/clk.h>
>>   #include <linux/irq.h>
>> +#include <linux/of_device.h>
>>   #include <linux/phy/phy.h>
>>   #include <linux/regulator/consumer.h>
>>
>> @@ -54,9 +55,12 @@
>>
>>   /* FIFO memory AC characteristic register */
>>   #define DSIM_PLLCTRL_REG       0x4c    /* PLL control register */
>> -#define DSIM_PLLTMR_REG                0x50    /* PLL timer register */
>>   #define DSIM_PHYACCHR_REG      0x54    /* D-PHY AC characteristic register */
>>   #define DSIM_PHYACCHR1_REG     0x58    /* D-PHY AC characteristic register1 */
>> +#define DSIM_PHYCTRL_REG       0x5c
>> +#define DSIM_PHYTIMING_REG     0x64
>> +#define DSIM_PHYTIMING1_REG    0x68
>> +#define DSIM_PHYTIMING2_REG    0x6c
>>
>>   /* DSIM_STATUS */
>>   #define DSIM_STOP_STATE_DAT(x)         (((x) & 0xf) << 0)
>> @@ -200,6 +204,21 @@
>>   #define DSIM_PLL_M(x)                  ((x) << 4)
>>   #define DSIM_PLL_S(x)                  ((x) << 1)
>>
>> +/* DSIM_PHYTIMING */
>> +#define DSIM_PHYTIMING_LPX(x)          ((x) << 8)
>> +#define DSIM_PHYTIMING_HS_EXIT(x)      ((x) << 0)
>> +
>> +/* DSIM_PHYTIMING1 */
>> +#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
>> +#define DSIM_PHYTIMING1_CLK_ZERO(x)    ((x) << 16)
>> +#define DSIM_PHYTIMING1_CLK_POST(x)    ((x) << 8)
>> +#define DSIM_PHYTIMING1_CLK_TRAIL(x)   ((x) << 0)
>> +
>> +/* DSIM_PHYTIMING2 */
>> +#define DSIM_PHYTIMING2_HS_PREPARE(x)  ((x) << 16)
>> +#define DSIM_PHYTIMING2_HS_ZERO(x)     ((x) << 8)
>> +#define DSIM_PHYTIMING2_HS_TRAIL(x)    ((x) << 0)
>> +
>>   #define DSI_MAX_BUS_WIDTH              4
>>   #define DSI_NUM_VIRTUAL_CHANNELS       4
>>   #define DSI_TX_FIFO_SIZE               2048
>> @@ -233,6 +252,12 @@ struct exynos_dsi_transfer {
>>   #define DSIM_STATE_INITIALIZED         BIT(1)
>>   #define DSIM_STATE_CMD_LPM             BIT(2)
>>
>> +struct exynos_dsi_driver_data {
>
> Shouldn't this be static?
>
>> +       unsigned int plltmr_reg;
>> +
>
> nit: stray blank line
>
>> +       unsigned int has_freqband:1;
>> +};
>> +
>
> <snip>
>
>> +static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
>> +{
>> +       struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
>> +       u32 reg;
>> +
>> +       if (driver_data->has_freqband)
>> +               return;
>> +
>> +       /* B D-PHY */
>> +       reg = 0x0af & 0x1ff;
>
> Please use macros instead of magic numbers.
>