[PATCH 4/7] drm/gma500: Renaming DP training vswing pre emph defines
sonika.jindal at intel.com
sonika.jindal at intel.com
Fri Aug 8 03:53:43 PDT 2014
From: Sonika Jindal <sonika.jindal at intel.com>
Rename the defines to have levels instead of values for vswing and
pre-emph levels as the values may differ in other scenarios like low vswing of
eDP1.4 where the values are different.
Done using following cocci patch for each define:
@@
@@
# define DP_TRAIN_VOLTAGE_SWING_400 (0 << 0)
+ # define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0)
...
Signed-off-by: Sonika Jindal <sonika.jindal at intel.com>
---
drivers/gpu/drm/gma500/cdv_intel_dp.c | 4 ++--
drivers/gpu/drm/gma500/intel_bios.c | 16 ++++++++--------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index a4cc0e6..9f158ea 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -1089,7 +1089,7 @@ static char *link_train_names[] = {
};
#endif
-#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200
+#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_LEVEL_3
/*
static uint8_t
cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing)
@@ -1276,7 +1276,7 @@ cdv_intel_dp_set_vswing_premph(struct gma_encoder *encoder, uint8_t signal_level
cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]);
/* ;gfx_dpio_set_reg(0x814c, 0x40802040) */
- if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_1200)
+ if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_LEVEL_3)
cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040);
else
cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040);
diff --git a/drivers/gpu/drm/gma500/intel_bios.c b/drivers/gpu/drm/gma500/intel_bios.c
index d349734..63bde4e 100644
--- a/drivers/gpu/drm/gma500/intel_bios.c
+++ b/drivers/gpu/drm/gma500/intel_bios.c
@@ -116,30 +116,30 @@ parse_edp(struct drm_psb_private *dev_priv, struct bdb_header *bdb)
switch (edp_link_params->preemphasis) {
case 0:
- dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_0;
+ dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_0;
break;
case 1:
- dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_3_5;
+ dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_1;
break;
case 2:
- dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_6;
+ dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_2;
break;
case 3:
- dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPHASIS_9_5;
+ dev_priv->edp.preemphasis = DP_TRAIN_PRE_EMPH_LEVEL_3;
break;
}
switch (edp_link_params->vswing) {
case 0:
- dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_400;
+ dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_0;
break;
case 1:
- dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_600;
+ dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_1;
break;
case 2:
- dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_800;
+ dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
break;
case 3:
- dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_1200;
+ dev_priv->edp.vswing = DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
break;
}
DRM_DEBUG_KMS("VBT reports EDP: VSwing %d, Preemph %d\n",
--
1.7.10.4
More information about the dri-devel
mailing list