[PATCH 2/2] drm/exynos: mipi-dsi: consider non-continuous clock mode

[Andrzej Hajda]

On 08/18/2014 10:11 AM, Inki Dae wrote:
> This patch adds non-continuous clock mode support
>
> Clock mode on Clock Lane is continuous clock by default.
> So if we want to transmit data in non-continuous clock mode
> to reduce power consumption, then host driver should set
> DSIM_CLKLANE_STOP bit. In this case, host controller turns off
> HS clock between high speed transmissions.
>
> For this, this patch adds a new bit, DSIM_CLKLANE_STOP, and makes
> the host driver set this bit only in case that dsi->mode_flags has
> MIPI_DSI_CLOCK_NON_CONTINUOUS flag.
>
> Signed-off-by: Inki Dae <inki.dae at samsung.com>

Acked-by: Andrzej Hajda <a.hajda at samsung.com>
--
Regards
Andrzej
> ---
>  drivers/gpu/drm/exynos/exynos_drm_dsi.c |   19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 442aa2d..2d47290 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -114,6 +114,8 @@
>  #define DSIM_SYNC_INFORM		(1 << 27)
>  #define DSIM_EOT_DISABLE		(1 << 28)
>  #define DSIM_MFLUSH_VS			(1 << 29)
> +/* This flag is valid only for exynos3250/3472/4415/5260/5430 */
> +#define DSIM_CLKLANE_STOP		(1 << 30)
>  
>  /* DSIM_ESCMODE */
>  #define DSIM_TX_TRIGGER_RST		(1 << 4)
> @@ -262,6 +264,7 @@ struct exynos_dsi_driver_data {
>  	unsigned int plltmr_reg;
>  
>  	unsigned int has_freqband:1;
> +	unsigned int has_clklane_stop:1;
>  };
>  
>  struct exynos_dsi {
> @@ -304,6 +307,7 @@ struct exynos_dsi {
>  static struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
>  	.plltmr_reg = 0x50,
>  	.has_freqband = 1,
> +	.has_clklane_stop = 1,
>  };
>  
>  static struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
> @@ -569,6 +573,7 @@ static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
>  
>  static int exynos_dsi_init_link(struct exynos_dsi *dsi)
>  {
> +	struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
>  	int timeout;
>  	u32 reg;
>  	u32 lanes_mask;
> @@ -650,6 +655,20 @@ static int exynos_dsi_init_link(struct exynos_dsi *dsi)
>  	reg |= DSIM_LANE_EN(lanes_mask);
>  	writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
>  
> +	/*
> +	 * Use non-continuous clock mode if the periparal wants and
> +	 * host controller supports
> +	 *
> +	 * In non-continous clock mode, host controller will turn off
> +	 * the HS clock between high-speed transmissions to reduce
> +	 * power consumption.
> +	 */
> +	if (driver_data->has_clklane_stop &&
> +			dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
> +		reg |= DSIM_CLKLANE_STOP;
> +		writel(reg, dsi->reg_base + DSIM_CONFIG_REG);
> +	}
> +
>  	/* Check clock and data lane state are stop state */
>  	timeout = 100;
>  	do {