[PATCH 15/15] drm/exynos/fimc: fix source buffer registers

[Andrzej Hajda]

On 08/26/2014 07:57 AM, Joonyoung Shim wrote:
> Hi Andrzej,
>
> On 08/22/2014 04:52 PM, Andrzej Hajda wrote:
>> FIMC in default mode of operation uses only one input buffer,
>> but the driver used also second buffer, as a result only the
>> first frame was processed correctly. The patch fixes it.
> I can't understand well, then we don't need to distinguish buf_id in
> fimc_src_set_addr()?
Yes. FIMC in default operation mode uses only one input buffer pointer
which should
be updated when processing of the previous buffer has been finished.

There exists also ping-pong mode which uses two buffer pointers, as I
have spotted in
specs. However I have not seen it was implemented neither in drm,
neither in camera drivers.
I will try to implement it later.

Regards
Andrzej

>
>> Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
>> ---
>>  drivers/gpu/drm/exynos/exynos_drm_fimc.c | 16 ++++++++--------
>>  1 file changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>> index b20078e..e985253 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
>> @@ -720,24 +720,24 @@ static int fimc_src_set_addr(struct device *dev,
>>  	case IPP_BUF_ENQUEUE:
>>  		config = &property->config[EXYNOS_DRM_OPS_SRC];
>>  		fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_Y],
>> -			EXYNOS_CIIYSA(buf_id));
>> +			EXYNOS_CIIYSA0);
>>  
>>  		if (config->fmt == DRM_FORMAT_YVU420) {
>>  			fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CR],
>> -				EXYNOS_CIICBSA(buf_id));
>> +				EXYNOS_CIICBSA0);
>>  			fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CB],
>> -				EXYNOS_CIICRSA(buf_id));
>> +				EXYNOS_CIICRSA0);
>>  		} else {
>>  			fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CB],
>> -				EXYNOS_CIICBSA(buf_id));
>> +				EXYNOS_CIICBSA0);
>>  			fimc_write(ctx, buf_info->base[EXYNOS_DRM_PLANAR_CR],
>> -				EXYNOS_CIICRSA(buf_id));
>> +				EXYNOS_CIICRSA0);
>>  		}
>>  		break;
>>  	case IPP_BUF_DEQUEUE:
>> -		fimc_write(ctx, 0x0, EXYNOS_CIIYSA(buf_id));
>> -		fimc_write(ctx, 0x0, EXYNOS_CIICBSA(buf_id));
>> -		fimc_write(ctx, 0x0, EXYNOS_CIICRSA(buf_id));
>> +		fimc_write(ctx, 0x0, EXYNOS_CIIYSA0);
>> +		fimc_write(ctx, 0x0, EXYNOS_CIICBSA0);
>> +		fimc_write(ctx, 0x0, EXYNOS_CIICRSA0);
>>  		break;
>>  	default:
>>  		/* bypass */
>>
>