[PATCH v17 07/12] drm: bridge/dw_hdmi: add support for multi-byte register width access
Andy Yan
andy.yan at rock-chips.com
Thu Dec 4 02:06:57 PST 2014
On rockchip rk3288, only word(32-bit) accesses are
permitted for hdmi registers. Byte width accesses (writeb,
readb) generate an imprecise external abort.
Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
---
Changes in v17: None
Changes in v16: None
Changes in v15:
- remove unio of the multi-byte register access, adviced by Philipp Zabel
Changes in v14: None
Changes in v13: None
Changes in v12: None
Changes in v11: None
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6:
- refactor register access without reg_shift
Changes in v5:
- refactor reg-io-width
Changes in v4: None
Changes in v3:
- split multi-register access to one indepent patch
drivers/gpu/drm/bridge/dw_hdmi.c | 44 ++++++++++++++++++++++++++++++++++++++--
1 file changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index b69057d..37966f4 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -128,18 +128,41 @@ struct dw_hdmi {
unsigned int sample_rate;
int ratio;
+
+ void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
+ u8 (*read)(struct dw_hdmi *hdmi, int offset);
};
-static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
+static void dw_hdmi_writel(struct dw_hdmi *hdmi, u8 val, int offset)
+{
+ writel(val, hdmi->regs + (offset << 2));
+}
+
+static u8 dw_hdmi_readl(struct dw_hdmi *hdmi, int offset)
+{
+ return readl(hdmi->regs + (offset << 2));
+}
+
+static void dw_hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
{
writeb(val, hdmi->regs + offset);
}
-static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
+static u8 dw_hdmi_readb(struct dw_hdmi *hdmi, int offset)
{
return readb(hdmi->regs + offset);
}
+static inline void hdmi_writeb(struct dw_hdmi *hdmi, u8 val, int offset)
+{
+ hdmi->write(hdmi, val, offset);
+}
+
+static inline u8 hdmi_readb(struct dw_hdmi *hdmi, int offset)
+{
+ return hdmi->read(hdmi, offset);
+}
+
static void hdmi_modb(struct dw_hdmi *hdmi, u8 data, u8 mask, unsigned reg)
{
u8 val = hdmi_readb(hdmi, reg) & ~mask;
@@ -1511,6 +1534,7 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
struct device_node *ddc_node;
struct dw_hdmi *hdmi;
int ret;
+ u32 val = 1;
hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
if (!hdmi)
@@ -1523,6 +1547,22 @@ int dw_hdmi_bind(struct device *dev, struct device *master,
hdmi->ratio = 100;
hdmi->encoder = encoder;
+ of_property_read_u32(np, "reg-io-width", &val);
+
+ switch (val) {
+ case 4:
+ hdmi->write = dw_hdmi_writel;
+ hdmi->read = dw_hdmi_readl;
+ break;
+ case 1:
+ hdmi->write = dw_hdmi_writeb;
+ hdmi->read = dw_hdmi_readb;
+ break;
+ default:
+ dev_err(dev, "reg-io-width must be 1 or 4\n");
+ return -EINVAL;
+ }
+
ddc_node = of_parse_phandle(np, "ddc-i2c-bus", 0);
if (ddc_node) {
hdmi->ddc = of_find_i2c_adapter_by_node(ddc_node);
--
1.9.1
More information about the dri-devel
mailing list