[PATCH v2 0/3] add display support for exynos3250 rinato board

[Hyungwon Hwang]

This is v2 of the patchset adding support for s6e63j0x03 lcd panel.

Inki Dae sent this patchset before. Because of his busy work at company,
I modifies some point according to the review by Thierry Reding on
behalf of him.

This patch series adds Display support for exynos3250 Rinato board.
For this, it adds fimd, MIPI-DSI and Panel device nodes to
exynos3250-rinato dts file, and adds a s6e63j0x03 Amoled panel device
driver which is based on MIPI-DSI bus.

Changes for v2:
- Change the gamma table to 2-dimensional array
- Change the way to make index for brightness
- Make command functions to an array so that it can be called simply
- Change command id for reading device ID
- Change the way to handle the error condition
- Remove power variable, and use the same name variable in bl_dev
- Add the state FB_BLANK_NORMAL to represent the state which the panel
is working but blanked
- Miscellaneous changes to increase the readability and follow the
  coding-style standard

Inki Dae (3):
  ARM: dts: add fimd device support for exynos3250-rinato
  drm/panel: add s6e63j0x03 LCD panel driver
  ARM: dts: add Panel device support for exynos3250-rinato

 arch/arm/boot/dts/exynos3250-rinato.dts  |  71 ++++
 drivers/gpu/drm/panel/Kconfig            |   6 +
 drivers/gpu/drm/panel/Makefile           |   1 +
 drivers/gpu/drm/panel/panel-s6e63j0x03.c | 549 +++++++++++++++++++++++++++++++
 4 files changed, 627 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-s6e63j0x03.c

-- 
1.9.1