[RFC] drm/i915: tame the chattermouth
Rob Clark
robdclark at gmail.com
Thu Dec 11 15:18:12 PST 2014
Many distro's have mechanism in place to collect and automatically file
bugs for failed WARN()s. And since every third line in i915 is a WARN()
it generates quite a lot of noise which is somewhat disconcerting to the
end user.
Separate out the internal hw-is-in-the-state-I-expected checks into
I915_WARN()s and allow configuration via i915.verbose_checks module
param about whether this will generate a full blown stacktrace or just
DRM_ERROR().
Signed-off-by: Rob Clark <robdclark at gmail.com>
---
drivers/gpu/drm/i915/i915_drv.h | 29 +++++++
drivers/gpu/drm/i915/i915_params.c | 5 ++
drivers/gpu/drm/i915/intel_display.c | 134 ++++++++++++++++----------------
drivers/gpu/drm/i915/intel_dp.c | 4 +-
drivers/gpu/drm/i915/intel_runtime_pm.c | 2 +-
5 files changed, 104 insertions(+), 70 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index bb1892d..9fabaff 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -60,6 +60,34 @@
#undef WARN_ON
#define WARN_ON(x) WARN(x, "WARN_ON(" #x ")")
+/* Use I915_WARN(x) and I915_WARN_ON() (rather than WARN() and WARN_ON())
+ * to check for unexpected conditions which may not necessarily be a user
+ * visible problem. This will either WARN() or DRM_ERROR() depending on
+ * the verbose_checks moduleparam, enabling distros and users to tailor
+ * their preferred amount of i915 abrt spam.
+ */
+#define I915_WARN(condition, format...) ({ \
+ int __ret_warn_on = !!(condition); \
+ if (unlikely(__ret_warn_on)) { \
+ if (i915.verbose_checks) \
+ __WARN_printf(format); \
+ else \
+ DRM_ERROR(format); \
+ } \
+ unlikely(__ret_warn_on); \
+})
+
+#define I915_WARN_ON(condition) ({ \
+ int __ret_warn_on = !!(condition); \
+ if (unlikely(__ret_warn_on)) { \
+ if (i915.verbose_checks) \
+ __WARN_printf("WARN_ON(" #condition ")\n"); \
+ else \
+ DRM_ERROR("WARN_ON(" #condition ")\n"); \
+ } \
+ unlikely(__ret_warn_on); \
+})
+
enum pipe {
INVALID_PIPE = -1,
PIPE_A = 0,
@@ -2311,6 +2339,7 @@ struct i915_params {
bool disable_vtd_wa;
int use_mmio_flip;
bool mmio_debug;
+ bool verbose_checks;
};
extern struct i915_params i915 __read_mostly;
diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
index c91cb20..72777da 100644
--- a/drivers/gpu/drm/i915/i915_params.c
+++ b/drivers/gpu/drm/i915/i915_params.c
@@ -51,6 +51,7 @@ struct i915_params i915 __read_mostly = {
.disable_vtd_wa = 0,
.use_mmio_flip = 0,
.mmio_debug = 0,
+ .verbose_checks = 1,
};
module_param_named(modeset, i915.modeset, int, 0400);
@@ -173,3 +174,7 @@ module_param_named(mmio_debug, i915.mmio_debug, bool, 0600);
MODULE_PARM_DESC(mmio_debug,
"Enable the MMIO debug code (default: false). This may negatively "
"affect performance.");
+
+module_param_named(verbose_checks, i915.verbose_checks, bool, 0600);
+MODULE_PARM_DESC(verbose_checks,
+ "Enable verbose logs (ie. WARN_ON()) in case of unexpected conditions.");
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 63247c6..7b4ed18 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1024,7 +1024,7 @@ void assert_pll(struct drm_i915_private *dev_priv,
reg = DPLL(pipe);
val = I915_READ(reg);
cur_state = !!(val & DPLL_VCO_ENABLE);
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"PLL state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1040,7 +1040,7 @@ static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
mutex_unlock(&dev_priv->dpio_lock);
cur_state = val & DSI_PLL_VCO_EN;
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"DSI PLL state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1071,7 +1071,7 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
return;
cur_state = pll->get_hw_state(dev_priv, pll, &hw_state);
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"%s assertion failure (expected %s, current %s)\n",
pll->name, state_string(state), state_string(cur_state));
}
@@ -1095,7 +1095,7 @@ static void assert_fdi_tx(struct drm_i915_private *dev_priv,
val = I915_READ(reg);
cur_state = !!(val & FDI_TX_ENABLE);
}
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"FDI TX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1112,7 +1112,7 @@ static void assert_fdi_rx(struct drm_i915_private *dev_priv,
reg = FDI_RX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_RX_ENABLE);
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"FDI RX state assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1135,7 +1135,7 @@ static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
reg = FDI_TX_CTL(pipe);
val = I915_READ(reg);
- WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+ I915_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
}
void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
@@ -1148,7 +1148,7 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
reg = FDI_RX_CTL(pipe);
val = I915_READ(reg);
cur_state = !!(val & FDI_RX_PLL_ENABLE);
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"FDI RX PLL assertion failure (expected %s, current %s)\n",
state_string(state), state_string(cur_state));
}
@@ -1190,7 +1190,7 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
locked = false;
- WARN(panel_pipe == pipe && locked,
+ I915_WARN(panel_pipe == pipe && locked,
"panel assertion failure, pipe %c regs locked\n",
pipe_name(pipe));
}
@@ -1206,7 +1206,7 @@ static void assert_cursor(struct drm_i915_private *dev_priv,
else
cur_state = I915_READ(CURCNTR(pipe)) & CURSOR_MODE;
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"cursor on pipe %c assertion failure (expected %s, current %s)\n",
pipe_name(pipe), state_string(state), state_string(cur_state));
}
@@ -1236,7 +1236,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
cur_state = !!(val & PIPECONF_ENABLE);
}
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"pipe %c assertion failure (expected %s, current %s)\n",
pipe_name(pipe), state_string(state), state_string(cur_state));
}
@@ -1251,7 +1251,7 @@ static void assert_plane(struct drm_i915_private *dev_priv,
reg = DSPCNTR(plane);
val = I915_READ(reg);
cur_state = !!(val & DISPLAY_PLANE_ENABLE);
- WARN(cur_state != state,
+ I915_WARN(cur_state != state,
"plane %c assertion failure (expected %s, current %s)\n",
plane_name(plane), state_string(state), state_string(cur_state));
}
@@ -1271,7 +1271,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
if (INTEL_INFO(dev)->gen >= 4) {
reg = DSPCNTR(pipe);
val = I915_READ(reg);
- WARN(val & DISPLAY_PLANE_ENABLE,
+ I915_WARN(val & DISPLAY_PLANE_ENABLE,
"plane %c assertion failure, should be disabled but not\n",
plane_name(pipe));
return;
@@ -1283,7 +1283,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv,
val = I915_READ(reg);
cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
DISPPLANE_SEL_PIPE_SHIFT;
- WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
+ I915_WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe,
"plane %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(i), pipe_name(pipe));
}
@@ -1299,7 +1299,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
if (INTEL_INFO(dev)->gen >= 9) {
for_each_sprite(pipe, sprite) {
val = I915_READ(PLANE_CTL(pipe, sprite));
- WARN(val & PLANE_CTL_ENABLE,
+ I915_WARN(val & PLANE_CTL_ENABLE,
"plane %d assertion failure, should be off on pipe %c but is still active\n",
sprite, pipe_name(pipe));
}
@@ -1307,20 +1307,20 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
for_each_sprite(pipe, sprite) {
reg = SPCNTR(pipe, sprite);
val = I915_READ(reg);
- WARN(val & SP_ENABLE,
+ I915_WARN(val & SP_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
sprite_name(pipe, sprite), pipe_name(pipe));
}
} else if (INTEL_INFO(dev)->gen >= 7) {
reg = SPRCTL(pipe);
val = I915_READ(reg);
- WARN(val & SPRITE_ENABLE,
+ I915_WARN(val & SPRITE_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
} else if (INTEL_INFO(dev)->gen >= 5) {
reg = DVSCNTR(pipe);
val = I915_READ(reg);
- WARN(val & DVS_ENABLE,
+ I915_WARN(val & DVS_ENABLE,
"sprite %c assertion failure, should be off on pipe %c but is still active\n",
plane_name(pipe), pipe_name(pipe));
}
@@ -1328,7 +1328,7 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
static void assert_vblank_disabled(struct drm_crtc *crtc)
{
- if (WARN_ON(drm_crtc_vblank_get(crtc) == 0))
+ if (I915_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
drm_crtc_vblank_put(crtc);
}
@@ -1337,12 +1337,12 @@ static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv)
u32 val;
bool enabled;
- WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
+ I915_WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev)));
val = I915_READ(PCH_DREF_CONTROL);
enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
DREF_SUPERSPREAD_SOURCE_MASK));
- WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
+ I915_WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n");
}
static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
@@ -1355,7 +1355,7 @@ static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
reg = PCH_TRANSCONF(pipe);
val = I915_READ(reg);
enabled = !!(val & TRANS_ENABLE);
- WARN(enabled,
+ I915_WARN(enabled,
"transcoder assertion failed, should be off on pipe %c but is still active\n",
pipe_name(pipe));
}
@@ -1435,11 +1435,11 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg, u32 port_sel)
{
u32 val = I915_READ(reg);
- WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
+ I915_WARN(dp_pipe_enabled(dev_priv, pipe, port_sel, val),
"PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
+ I915_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0
&& (val & DP_PIPEB_SELECT),
"IBX PCH dp port still using transcoder B\n");
}
@@ -1448,11 +1448,11 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe, int reg)
{
u32 val = I915_READ(reg);
- WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
+ I915_WARN(hdmi_pipe_enabled(dev_priv, pipe, val),
"PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
- WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
+ I915_WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_ENABLE) == 0
&& (val & SDVO_PIPE_B_SELECT),
"IBX PCH hdmi port still using transcoder B\n");
}
@@ -1469,13 +1469,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
reg = PCH_ADPA;
val = I915_READ(reg);
- WARN(adpa_pipe_enabled(dev_priv, pipe, val),
+ I915_WARN(adpa_pipe_enabled(dev_priv, pipe, val),
"PCH VGA enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
reg = PCH_LVDS;
val = I915_READ(reg);
- WARN(lvds_pipe_enabled(dev_priv, pipe, val),
+ I915_WARN(lvds_pipe_enabled(dev_priv, pipe, val),
"PCH LVDS enabled on transcoder %c, should be disabled\n",
pipe_name(pipe));
@@ -5382,25 +5382,25 @@ static void intel_connector_check_state(struct intel_connector *connector)
if (connector->mst_port)
return;
- WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
+ I915_WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
"wrong connector dpms state\n");
- WARN(connector->base.encoder != &encoder->base,
+ I915_WARN(connector->base.encoder != &encoder->base,
"active connector not linked to encoder\n");
if (encoder) {
- WARN(!encoder->connectors_active,
+ I915_WARN(!encoder->connectors_active,
"encoder->connectors_active not set\n");
encoder_enabled = encoder->get_hw_state(encoder, &pipe);
- WARN(!encoder_enabled, "encoder not enabled\n");
- if (WARN_ON(!encoder->base.crtc))
+ I915_WARN(!encoder_enabled, "encoder not enabled\n");
+ if (I915_WARN_ON(!encoder->base.crtc))
return;
crtc = encoder->base.crtc;
- WARN(!crtc->enabled, "crtc not enabled\n");
- WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
- WARN(pipe != to_intel_crtc(crtc)->pipe,
+ I915_WARN(!crtc->enabled, "crtc not enabled\n");
+ I915_WARN(!to_intel_crtc(crtc)->active, "crtc not active\n");
+ I915_WARN(pipe != to_intel_crtc(crtc)->pipe,
"encoder active on the wrong pipe\n");
}
}
@@ -7810,24 +7810,24 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
struct intel_crtc *crtc;
for_each_intel_crtc(dev, crtc)
- WARN(crtc->active, "CRTC for pipe %c enabled\n",
+ I915_WARN(crtc->active, "CRTC for pipe %c enabled\n",
pipe_name(crtc->pipe));
- WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
- WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
- WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
- WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
- WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
- WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
+ I915_WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n");
+ I915_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
+ I915_WARN(I915_READ(WRPLL_CTL1) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
+ I915_WARN(I915_READ(WRPLL_CTL2) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
+ I915_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
+ I915_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
"CPU PWM1 enabled\n");
if (IS_HASWELL(dev))
- WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
+ I915_WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE,
"CPU PWM2 enabled\n");
- WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
+ I915_WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE,
"PCH PWM1 enabled\n");
- WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+ I915_WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
"Utility pin enabled\n");
- WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
+ I915_WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n");
/*
* In theory we can still leave IRQs enabled, as long as only the HPD
@@ -7835,7 +7835,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
* gen-specific and since we only disable LCPLL after we fully disable
* the interrupts, the check below should be enough.
*/
- WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
+ I915_WARN(intel_irqs_enabled(dev_priv), "IRQs enabled\n");
}
static uint32_t hsw_read_dcomp(struct drm_i915_private *dev_priv)
@@ -10742,7 +10742,7 @@ check_connector_state(struct drm_device *dev)
* ->get_hw_state callbacks. */
intel_connector_check_state(connector);
- WARN(&connector->new_encoder->base != connector->base.encoder,
+ I915_WARN(&connector->new_encoder->base != connector->base.encoder,
"connector's staged encoder doesn't match current encoder\n");
}
}
@@ -10762,9 +10762,9 @@ check_encoder_state(struct drm_device *dev)
encoder->base.base.id,
encoder->base.name);
- WARN(&encoder->new_crtc->base != encoder->base.crtc,
+ I915_WARN(&encoder->new_crtc->base != encoder->base.crtc,
"encoder's stage crtc doesn't match current crtc\n");
- WARN(encoder->connectors_active && !encoder->base.crtc,
+ I915_WARN(encoder->connectors_active && !encoder->base.crtc,
"encoder's active_connectors set, but no crtc\n");
list_for_each_entry(connector, &dev->mode_config.connector_list,
@@ -10783,19 +10783,19 @@ check_encoder_state(struct drm_device *dev)
if (!enabled && encoder->base.encoder_type == DRM_MODE_ENCODER_DPMST)
continue;
- WARN(!!encoder->base.crtc != enabled,
+ I915_WARN(!!encoder->base.crtc != enabled,
"encoder's enabled state mismatch "
"(expected %i, found %i)\n",
!!encoder->base.crtc, enabled);
- WARN(active && !encoder->base.crtc,
+ I915_WARN(active && !encoder->base.crtc,
"active encoder with no crtc\n");
- WARN(encoder->connectors_active != active,
+ I915_WARN(encoder->connectors_active != active,
"encoder's computed active state doesn't match tracked active state "
"(expected %i, found %i)\n", active, encoder->connectors_active);
active = encoder->get_hw_state(encoder, &pipe);
- WARN(active != encoder->connectors_active,
+ I915_WARN(active != encoder->connectors_active,
"encoder's hw state doesn't match sw tracking "
"(expected %i, found %i)\n",
encoder->connectors_active, active);
@@ -10804,7 +10804,7 @@ check_encoder_state(struct drm_device *dev)
continue;
tracked_pipe = to_intel_crtc(encoder->base.crtc)->pipe;
- WARN(active && pipe != tracked_pipe,
+ I915_WARN(active && pipe != tracked_pipe,
"active encoder's pipe doesn't match"
"(expected %i, found %i)\n",
tracked_pipe, pipe);
@@ -10829,7 +10829,7 @@ check_crtc_state(struct drm_device *dev)
DRM_DEBUG_KMS("[CRTC:%d]\n",
crtc->base.base.id);
- WARN(crtc->active && !crtc->base.enabled,
+ I915_WARN(crtc->active && !crtc->base.enabled,
"active crtc, but not enabled in sw tracking\n");
for_each_intel_encoder(dev, encoder) {
@@ -10840,10 +10840,10 @@ check_crtc_state(struct drm_device *dev)
active = true;
}
- WARN(active != crtc->active,
+ I915_WARN(active != crtc->active,
"crtc's computed active state doesn't match tracked active state "
"(expected %i, found %i)\n", active, crtc->active);
- WARN(enabled != crtc->base.enabled,
+ I915_WARN(enabled != crtc->base.enabled,
"crtc's computed enabled state doesn't match tracked enabled state "
"(expected %i, found %i)\n", enabled, crtc->base.enabled);
@@ -10863,13 +10863,13 @@ check_crtc_state(struct drm_device *dev)
encoder->get_config(encoder, &pipe_config);
}
- WARN(crtc->active != active,
+ I915_WARN(crtc->active != active,
"crtc active state doesn't match with hw state "
"(expected %i, found %i)\n", crtc->active, active);
if (active &&
!intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) {
- WARN(1, "pipe state doesn't match!\n");
+ I915_WARN(1, "pipe state doesn't match!\n");
intel_dump_pipe_config(crtc, &pipe_config,
"[hw state]");
intel_dump_pipe_config(crtc, &crtc->config,
@@ -10897,14 +10897,14 @@ check_shared_dpll_state(struct drm_device *dev)
active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state);
- WARN(pll->active > hweight32(pll->config.crtc_mask),
+ I915_WARN(pll->active > hweight32(pll->config.crtc_mask),
"more active pll users than references: %i vs %i\n",
pll->active, hweight32(pll->config.crtc_mask));
- WARN(pll->active && !pll->on,
+ I915_WARN(pll->active && !pll->on,
"pll in active use but not on in sw tracking\n");
- WARN(pll->on && !pll->active,
+ I915_WARN(pll->on && !pll->active,
"pll in on but not on in use in sw tracking\n");
- WARN(pll->on != active,
+ I915_WARN(pll->on != active,
"pll on state mismatch (expected %i, found %i)\n",
pll->on, active);
@@ -10914,14 +10914,14 @@ check_shared_dpll_state(struct drm_device *dev)
if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll)
active_crtcs++;
}
- WARN(pll->active != active_crtcs,
+ I915_WARN(pll->active != active_crtcs,
"pll active crtcs mismatch (expected %i, found %i)\n",
pll->active, active_crtcs);
- WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
+ I915_WARN(hweight32(pll->config.crtc_mask) != enabled_crtcs,
"pll enabled crtcs mismatch (expected %i, found %i)\n",
hweight32(pll->config.crtc_mask), enabled_crtcs);
- WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
+ I915_WARN(pll->on && memcmp(&pll->config.hw_state, &dpll_hw_state,
sizeof(dpll_hw_state)),
"pll hw state mismatch\n");
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 5cecc20..6d5bf6e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1558,7 +1558,7 @@ void intel_edp_panel_vdd_on(struct intel_dp *intel_dp)
vdd = edp_panel_vdd_on(intel_dp);
pps_unlock(intel_dp);
- WARN(!vdd, "eDP port %c VDD already requested on\n",
+ I915_WARN(!vdd, "eDP port %c VDD already requested on\n",
port_name(dp_to_dig_port(intel_dp)->port));
}
@@ -1642,7 +1642,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync)
if (!is_edp(intel_dp))
return;
- WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
+ I915_WARN(!intel_dp->want_panel_vdd, "eDP port %c VDD not forced on",
port_name(dp_to_dig_port(intel_dp)->port));
intel_dp->want_panel_vdd = false;
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index f5a78d5..770c5f4 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -633,7 +633,7 @@ static void check_power_well_state(struct drm_i915_private *dev_priv,
return;
mismatch:
- WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
+ I915_WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
power_well->name, power_well->always_on, enabled,
power_well->count, i915.disable_power_well);
}
--
2.1.0
More information about the dri-devel
mailing list