[PATCH v2 2/3] drm/panel: add s6e63j0x03 LCD panel driver

Inki Dae inki.dae at samsung.com
Wed Dec 31 02:41:43 PST 2014


Hi Thierry,

Ping~.

Or is it ok to pick up this patch to my tree, exynos-drm-next? It
doesn't seem to care for a long time.

Thanks,
Inki Dae

On 2014년 12월 09일 18:29, Hyungwon Hwang wrote:
> From: Inki Dae <inki.dae at samsung.com>
> 
> This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver
> which uses mipi_dsi bus to communicate with panel. The panel has
> 320×320 resolution in 1.63-inch physical panel. This panel is used in
> Samsung Galaxy Gear 2.
> 
> Signed-off-by: Inki Dae <inki.dae at samsung.com>
> Signed-off-by: Hyungwon Hwang <human.hwang at samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> Changes for v2:
> - Change the gamma table to 2-dimensional array
> - Change the way to make index for brightness
> - Make command functions to an array so that it can be called simply
> - Change command id for reading device ID
> - Change the way to handle the error condition
> - Remove power variable, and use the same name variable in bl_dev
> - Add the state FB_BLANK_NORMAL to represent the state which the panel
> is working but blanked
> - Miscellaneous changes to increase the readability and follow the
>   coding-style standard
> 
>  drivers/gpu/drm/panel/Kconfig            |   6 +
>  drivers/gpu/drm/panel/Makefile           |   1 +
>  drivers/gpu/drm/panel/panel-s6e63j0x03.c | 549 +++++++++++++++++++++++++++++++
>  3 files changed, 556 insertions(+)
>  create mode 100644 drivers/gpu/drm/panel/panel-s6e63j0x03.c
> 
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index bee9f72..bc133e2 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -27,4 +27,10 @@ config DRM_PANEL_S6E8AA0
>  	select DRM_MIPI_DSI
>  	select VIDEOMODE_HELPERS
>  
> +config DRM_PANEL_S6E63J0X03
> +	tristate "S6E63J0X03 DSI video mode panel"
> +	depends on OF
> +	select DRM_MIPI_DSI
> +	select VIDEOMODE_HELPERS
> +
>  endmenu
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index 8b92921..7f36dc2 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,3 +1,4 @@
>  obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
>  obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
>  obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
> +obj-$(CONFIG_DRM_PANEL_S6E63J0X03) += panel-s6e63j0x03.o
> diff --git a/drivers/gpu/drm/panel/panel-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-s6e63j0x03.c
> new file mode 100644
> index 0000000..28e4a51
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-s6e63j0x03.c
> @@ -0,0 +1,549 @@
> +/*
> + * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver.
> + *
> + * Copyright (c) 2014 Samsung Electronics Co., Ltd
> + *
> + * Inki Dae, <inki.dae at samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/of_gpio.h>
> +#include <linux/gpio.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/backlight.h>
> +
> +#include <video/mipi_display.h>
> +#include <video/of_videomode.h>
> +#include <video/videomode.h>
> +
> +#define READ_ID1		0xDA
> +#define READ_ID2		0xDB
> +#define READ_ID3		0xDC
> +
> +#define MCS_LEVEL2_KEY		0xf0
> +#define MCS_MTP_KEY		0xf1
> +#define MCS_MTP_SET3		0xd4
> +
> +#define MIN_BRIGHTNESS		0
> +#define MAX_BRIGHTNESS		100
> +#define DEFAULT_BRIGHTNESS	80
> +
> +#define GAMMA_LEVEL_NUM		30
> +#define NUM_GAMMA_STEPS		9
> +#define GAMMA_CMD_CNT		28
> +
> +struct s6e63j0x03 {
> +	struct device *dev;
> +	struct drm_panel panel;
> +	struct backlight_device *bl_dev;
> +
> +	struct regulator_bulk_data supplies[2];
> +	struct gpio_desc *reset_gpio;
> +	u32 power_on_delay;
> +	u32 power_off_delay;
> +	u32 reset_delay;
> +	u32 init_delay;
> +	bool flip_horizontal;
> +	bool flip_vertical;
> +	struct videomode vm;
> +	unsigned int width_mm;
> +	unsigned int height_mm;
> +};
> +
> +static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = {
> +	{	/* Gamma 10 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26,
> +		0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36,
> +		0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf
> +	},
> +	{	/* gamma 30 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26,
> +		0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34,
> +		0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc
> +	},
> +	{	/* gamma 60 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a,
> +		0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33,
> +		0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5
> +	},
> +	{	/* gamma 90 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29,
> +		0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31,
> +		0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09
> +	},
> +	{	/* gamma 120 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28,
> +		0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31,
> +		0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b
> +	},
> +	{	/* gamma 150 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28,
> +		0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31,
> +		0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29
> +	},
> +	{	/* gamma 200 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29,
> +		0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30,
> +		0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b
> +	},
> +	{	/* gamma 240 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a,
> +		0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30,
> +		0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47
> +	},
> +	{	/* gamma 300 */
> +		MCS_MTP_SET3,
> +		0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28,
> +		0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f,
> +		0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57
> +	}
> +};
> +
> +static const unsigned char prepare_cmds1[][15] = {
> +	{ 3, 0xf2, 0x1c, 0x28 },		/* porch_adjustment */
> +	{ 4, 0xb5, 0x00, 0x02, 0x00 },		/* frame_freq */
> +	{ 5, 0x2a, 0x00, 0x14, 0x01, 0x53 },	/* mem_addr_set_0 */
> +	{ 5, 0x2b, 0x00, 0x00, 0x01, 0x3f },	/* mem_addr_set_1 */
> +	{ 14, 0xf8, 0x08, 0x08, 0x08, 0x17,	/* ltps_timming_set_0_60hz */
> +	      0x00, 0x2a, 0x02, 0x26,
> +	      0x00, 0x00, 0x02, 0x00, 0x00 },
> +	{ 2, 0xf7, 0x02 },			/* ltps_timming_set_1 */
> +	{ 2, 0xb0, 0x01 },			/* param_pos_te_edge */
> +	{ 2, 0xe2, 0x0f },			/* te_rising_edge */
> +	{ 2, 0xb0, 0x00 },			/* param_pos_default */
> +	{ 1, MIPI_DCS_EXIT_SLEEP_MODE },
> +};
> +
> +static const  unsigned char prepare_cmds2[][4] = {
> +	{ 3, 0xb1, 0x00, 0x09 },	/* elvss_cond */
> +	{ 2, 0x36, 0x40 },		/* set_pos */
> +	{ 2, 0x51, 0xff },		/* white_brightness_default */
> +	{ 2, 0x53, 0x20 },		/* white_ctrl */
> +	{ 2, 0x55, 0x00 },		/* acl_off */
> +	{ 1, MIPI_DCS_SET_TEAR_ON },
> +};
> +
> +
> +static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel)
> +{
> +	return container_of(panel, struct s6e63j0x03, panel);
> +}
> +
> +static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx,
> +					const u8 *seq, const unsigned char len)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> +	return mipi_dsi_dcs_write(dsi, seq, len);
> +}
> +
> +static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx)
> +{
> +	unsigned char seq[] = { MCS_LEVEL2_KEY, 0x5a, 0x5a };
> +
> +	return s6e63j0x03_dcs_write_seq(ctx, seq, ARRAY_SIZE(seq));
> +}
> +
> +static inline int s6e63j0x03_apply_mtp_key(struct s6e63j0x03 *ctx, bool on)
> +{
> +	unsigned char seq1[3] = { MCS_MTP_KEY, 0x5a, 0x5a };
> +	unsigned char seq2[3] = { MCS_MTP_KEY, 0xa5, 0xa5 };
> +
> +	return s6e63j0x03_dcs_write_seq(ctx, on ? seq1 : seq2,
> +					ARRAY_SIZE(seq1));
> +}
> +
> +static int s6e63j0x03_read_mtp_id(struct s6e63j0x03 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +	unsigned char cmds[3] = { READ_ID1, READ_ID2, READ_ID3 };
> +	unsigned char id[3];
> +	int ret;
> +	int i;
> +
> +	for (i = 0; i < 3; i++) {
> +		ret = mipi_dsi_dcs_read(dsi, cmds[i], &id[i], 1);
> +
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	dev_info(ctx->dev, "ID: 0x%02x, 0x%02x, 0x%02x\n", id[0], id[1], id[2]);
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_power_on(struct s6e63j0x03 *ctx)
> +{
> +	int ret;
> +
> +	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(ctx->power_on_delay);
> +
> +	gpiod_set_value(ctx->reset_gpio, 0);
> +	usleep_range(1000, 2000);
> +	gpiod_set_value(ctx->reset_gpio, 1);
> +
> +	usleep_range(ctx->reset_delay * 1000, (ctx->reset_delay + 1) * 1000);
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_power_off(struct s6e63j0x03 *ctx)
> +{
> +	int ret;
> +
> +	gpiod_set_value(ctx->reset_gpio, 0);
> +
> +	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_get_brightness(struct backlight_device *bl_dev)
> +{
> +	return bl_dev->props.brightness;
> +}
> +
> +static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)
> +{
> +	unsigned int index;
> +
> +	index = brightness / (MAX_BRIGHTNESS / NUM_GAMMA_STEPS);
> +
> +	if (index >= NUM_GAMMA_STEPS)
> +		index = NUM_GAMMA_STEPS - 1;
> +
> +	return index;
> +}
> +
> +static int s6e63j0x03_update_gamma(struct s6e63j0x03 *ctx,
> +					unsigned int brightness)
> +{
> +	struct backlight_device *bl_dev = ctx->bl_dev;
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +	unsigned int index = s6e63j0x03_get_brightness_index(brightness);
> +	int ret;
> +
> +	ret = s6e63j0x03_apply_mtp_key(ctx, true);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = mipi_dsi_dcs_write(dsi, gamma_tbl[index], GAMMA_CMD_CNT);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = s6e63j0x03_apply_mtp_key(ctx, false);
> +	if (ret < 0)
> +		return ret;
> +
> +	bl_dev->props.brightness = brightness;
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_set_brightness(struct backlight_device *bl_dev)
> +{
> +	struct s6e63j0x03 *ctx = (struct s6e63j0x03 *)bl_get_data(bl_dev);
> +	unsigned int brightness = bl_dev->props.brightness;
> +	int ret;
> +
> +	if (brightness < MIN_BRIGHTNESS ||
> +		brightness > bl_dev->props.max_brightness) {
> +		dev_err(ctx->dev, "Invalid brightness: %u\n", brightness);
> +		return -EINVAL;
> +	}
> +
> +	if (bl_dev->props.power > FB_BLANK_NORMAL) {
> +		dev_err(ctx->dev,
> +			"panel must be at least in fb blank normal state\n");
> +		return -EPERM;
> +	}
> +
> +	ret = s6e63j0x03_update_gamma(ctx, brightness);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static const struct backlight_ops s6e63j0x03_bl_ops = {
> +	.get_brightness = s6e63j0x03_get_brightness,
> +	.update_status = s6e63j0x03_set_brightness,
> +};
> +
> +static int s6e63j0x03_disable(struct drm_panel *panel)
> +{
> +	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
> +	struct backlight_device *bl_dev = ctx->bl_dev;
> +	u8 seq[] = { MIPI_DCS_SET_DISPLAY_OFF };
> +	int ret;
> +
> +	ret = s6e63j0x03_dcs_write_seq(ctx, seq, ARRAY_SIZE(seq));
> +	if (ret > 0)
> +		bl_dev->props.power = FB_BLANK_NORMAL;
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_unprepare(struct drm_panel *panel)
> +{
> +	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
> +	struct backlight_device *bl_dev = ctx->bl_dev;
> +	u8 seq[] = { MIPI_DCS_ENTER_SLEEP_MODE };
> +	int ret;
> +
> +	ret = s6e63j0x03_dcs_write_seq(ctx, seq, ARRAY_SIZE(seq));
> +	if (ret < 0)
> +		return ret;
> +
> +	msleep(ctx->power_off_delay);
> +
> +	ret = s6e63j0x03_power_off(ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	bl_dev->props.power = FB_BLANK_POWERDOWN;
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_prepare(struct drm_panel *panel)
> +{
> +	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
> +	struct backlight_device *bl_dev = ctx->bl_dev;
> +	int ret;
> +	int i;
> +
> +	ret = s6e63j0x03_power_on(ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = s6e63j0x03_enable_lv2_command(ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = s6e63j0x03_apply_mtp_key(ctx, true);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = s6e63j0x03_read_mtp_id(ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(prepare_cmds1); i++) {
> +		ret = s6e63j0x03_dcs_write_seq(ctx, &prepare_cmds1[i][1],
> +							prepare_cmds1[i][0]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	msleep(120);
> +
> +	for (i = 0; i < ARRAY_SIZE(prepare_cmds2); i++) {
> +		ret = s6e63j0x03_dcs_write_seq(ctx, &prepare_cmds2[i][1],
> +							prepare_cmds2[i][0]);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	ret = s6e63j0x03_apply_mtp_key(ctx, false);
> +	if (ret < 0)
> +		return ret;
> +
> +	bl_dev->props.power = FB_BLANK_NORMAL;
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_enable(struct drm_panel *panel)
> +{
> +	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
> +	struct backlight_device *bl_dev = ctx->bl_dev;
> +	u8 seq[] = { MIPI_DCS_SET_DISPLAY_ON };
> +	int ret;
> +
> +	ret = s6e63j0x03_dcs_write_seq(ctx, seq, ARRAY_SIZE(seq));
> +	if (ret > 0)
> +		bl_dev->props.power = FB_BLANK_UNBLANK;
> +
> +	return 0;
> +}
> +
> +static int s6e63j0x03_get_modes(struct drm_panel *panel)
> +{
> +	struct drm_connector *connector = panel->connector;
> +	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
> +	struct drm_display_mode *mode;
> +
> +	mode = drm_mode_create(connector->dev);
> +	if (!mode) {
> +		DRM_ERROR("failed to create a new display mode\n");
> +		return 0;
> +	}
> +
> +	drm_display_mode_from_videomode(&ctx->vm, mode);
> +	mode->width_mm = ctx->width_mm;
> +	mode->height_mm = ctx->height_mm;
> +	connector->display_info.width_mm = mode->width_mm;
> +	connector->display_info.height_mm = mode->height_mm;
> +
> +	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +	drm_mode_probed_add(connector, mode);
> +
> +	return 1;
> +}
> +
> +static const struct drm_panel_funcs s6e63j0x03_funcs = {
> +	.disable = s6e63j0x03_disable,
> +	.unprepare = s6e63j0x03_unprepare,
> +	.prepare = s6e63j0x03_prepare,
> +	.enable = s6e63j0x03_enable,
> +	.get_modes = s6e63j0x03_get_modes,
> +};
> +
> +static int s6e63j0x03_parse_dt(struct s6e63j0x03 *ctx)
> +{
> +	struct device *dev = ctx->dev;
> +	struct device_node *np = dev->of_node;
> +	int ret;
> +
> +	ret = of_get_videomode(np, &ctx->vm, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	of_property_read_u32(np, "power-on-delay", &ctx->power_on_delay);
> +	of_property_read_u32(np, "power-off-delay", &ctx->power_off_delay);
> +	of_property_read_u32(np, "reset-delay", &ctx->reset_delay);
> +	of_property_read_u32(np, "init-delay", &ctx->init_delay);
> +
> +	ctx->flip_horizontal = of_property_read_bool(np, "flip-horizontal");
> +	ctx->flip_vertical = of_property_read_bool(np, "flip-vertical");
> +
> +	return ret;
> +}
> +
> +static int s6e63j0x03_probe(struct mipi_dsi_device *dsi)
> +{
> +	struct device *dev = &dsi->dev;
> +	struct s6e63j0x03 *ctx;
> +	int ret;
> +
> +	ctx = devm_kzalloc(dev, sizeof(struct s6e63j0x03), GFP_KERNEL);
> +	if (!ctx)
> +		return -ENOMEM;
> +
> +	mipi_dsi_set_drvdata(dsi, ctx);
> +
> +	ctx->dev = dev;
> +
> +	dsi->lanes = 1;
> +	dsi->format = MIPI_DSI_FMT_RGB888;
> +	dsi->mode_flags = MIPI_DSI_MODE_EOT_PACKET | MIPI_DSI_MODE_VIDEO_BURST;
> +
> +	ret = s6e63j0x03_parse_dt(ctx);
> +	if (ret < 0)
> +		return ret;
> +
> +	ctx->supplies[0].supply = "vdd3";
> +	ctx->supplies[1].supply = "vci";
> +	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
> +				      ctx->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "failed to get regulators: %d\n", ret);
> +		return ret;
> +	}
> +
> +	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> +	if (IS_ERR(ctx->reset_gpio)) {
> +		dev_err(dev, "cannot get reset-gpio: %ld\n",
> +				PTR_ERR(ctx->reset_gpio));
> +		return PTR_ERR(ctx->reset_gpio);
> +	}
> +
> +	drm_panel_init(&ctx->panel);
> +	ctx->panel.dev = dev;
> +	ctx->panel.funcs = &s6e63j0x03_funcs;
> +
> +	ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx,
> +						&s6e63j0x03_bl_ops, NULL);
> +	if (IS_ERR(ctx->bl_dev)) {
> +		dev_err(dev, "failed to register backlight device\n");
> +		return PTR_ERR(ctx->bl_dev);
> +	}
> +
> +	ctx->bl_dev->props.max_brightness = MAX_BRIGHTNESS;
> +	ctx->bl_dev->props.brightness = DEFAULT_BRIGHTNESS;
> +	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
> +
> +
> +	ret = drm_panel_add(&ctx->panel);
> +	if (ret < 0)
> +		goto unregister_backlight;
> +
> +	ret = mipi_dsi_attach(dsi);
> +	if (ret < 0)
> +		goto remove_panel;
> +
> +	return ret;
> +
> +remove_panel:
> +	drm_panel_remove(&ctx->panel);
> +
> +unregister_backlight:
> +	backlight_device_unregister(ctx->bl_dev);
> +
> +	return ret;
> +}
> +
> +static int s6e63j0x03_remove(struct mipi_dsi_device *dsi)
> +{
> +	struct s6e63j0x03 *ctx = mipi_dsi_get_drvdata(dsi);
> +
> +	mipi_dsi_detach(dsi);
> +	drm_panel_remove(&ctx->panel);
> +
> +	backlight_device_unregister(ctx->bl_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id s6e63j0x03_of_match[] = {
> +	{ .compatible = "samsung,s6e63j0x03" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, s6e63j0x03_of_match);
> +
> +static struct mipi_dsi_driver s6e63j0x03_driver = {
> +	.probe = s6e63j0x03_probe,
> +	.remove = s6e63j0x03_remove,
> +	.driver = {
> +		.name = "panel_s6e63j0x03",
> +		.of_match_table = s6e63j0x03_of_match,
> +	},
> +};
> +module_mipi_dsi_driver(s6e63j0x03_driver);
> +
> +MODULE_AUTHOR("Inki Dae <inki.dae at samsung.com>");
> +MODULE_DESCRIPTION("MIPI-DSI based s6e8aa0 AMOLED LCD Panel Driver");
> +MODULE_LICENSE("GPL v2");
> 



More information about the dri-devel mailing list