[PATCH] drm/radeon: fix display tiling setup on SI
Deucher, Alexander
Alexander.Deucher at amd.com
Tue Feb 18 06:12:13 PST 2014
> -----Original Message-----
> From: Marek Olšák [mailto:maraeo at gmail.com]
> Sent: Tuesday, February 18, 2014 5:04 AM
> To: Alex Deucher
> Cc: dri-devel; Deucher, Alexander; stable at vger.kernel.org
> Subject: Re: [PATCH] drm/radeon: fix display tiling setup on SI
>
> Are you sure the index to si.tile_mode_array is correct? I wrote it
> for CI and I'm not sure if the index can be used for SI in this way too.
>
I'll double check. I think some of the indices may be different on SI, but I don't think the display ones are. The patch fixes tiling on the oland card I just got.
Alex
> Marek
>
> On Mon, Feb 17, 2014 at 8:21 PM, Alex Deucher <alexdeucher at gmail.com>
> wrote:
> > Apply the same logic as CI to SI for setting up the
> > display tiling parameters. The num banks may vary
> > per tiling index just like CI.
> >
> > Bugs:
> > https://bugs.freedesktop.org/show_bug.cgi?id=71488
> > https://bugs.freedesktop.org/show_bug.cgi?id=73946
> > https://bugs.freedesktop.org/show_bug.cgi?id=74927
> >
> > Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
> > Cc: stable at vger.kernel.org
> > ---
> > drivers/gpu/drm/radeon/atombios_crtc.c | 13 +++++++------
> > 1 file changed, 7 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c
> b/drivers/gpu/drm/radeon/atombios_crtc.c
> > index f0d409d..0d19f4f9 100644
> > --- a/drivers/gpu/drm/radeon/atombios_crtc.c
> > +++ b/drivers/gpu/drm/radeon/atombios_crtc.c
> > @@ -1176,7 +1176,7 @@ static int dce4_crtc_do_set_base(struct drm_crtc
> *crtc,
> > evergreen_tiling_fields(tiling_flags, &bankw, &bankh, &mtaspect,
> &tile_split);
> >
> > /* Set NUM_BANKS. */
> > - if (rdev->family >= CHIP_BONAIRE) {
> > + if (rdev->family >= CHIP_TAHITI) {
> > unsigned tileb, index, num_banks, tile_split_bytes;
> >
> > /* Calculate the macrotile mode index. */
> > @@ -1194,13 +1194,14 @@ static int dce4_crtc_do_set_base(struct
> drm_crtc *crtc,
> > return -EINVAL;
> > }
> >
> > - num_banks = (rdev->config.cik.macrotile_mode_array[index]
> >> 6) & 0x3;
> > + if (rdev->family >= CHIP_BONAIRE)
> > + num_banks = (rdev-
> >config.cik.macrotile_mode_array[index] >> 6) & 0x3;
> > + else
> > + num_banks = (rdev->config.si.tile_mode_array[index] >>
> 20) & 0x3;
> > fb_format |= EVERGREEN_GRPH_NUM_BANKS(num_banks);
> > } else {
> > - /* SI and older. */
> > - if (rdev->family >= CHIP_TAHITI)
> > - tmp = rdev->config.si.tile_config;
> > - else if (rdev->family >= CHIP_CAYMAN)
> > + /* NI and older. */
> > + if (rdev->family >= CHIP_CAYMAN)
> > tmp = rdev->config.cayman.tile_config;
> > else
> > tmp = rdev->config.evergreen.tile_config;
> > --
> > 1.8.3.1
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list