[PATCH] drm/exynos: restore core HDMI settings

[Inki Dae]

2014-02-14 16:34 GMT+09:00 Shirish S <s.shirish at samsung.com>:
> In DVI mode the video preamble and Guard band should
> be disabled whereas it should be applied in HDMI mode,
> the re-applying of preamble and guard band was missing,
> which resulted in display failures when switched to HDMI
> mode from DVI mode.
> This patch ensures the setting is applied in HDMI mode.
>
> Signed-off-by: Shirish S <s.shirish at samsung.com>
> ---
>  drivers/gpu/drm/exynos/exynos_hdmi.c |    2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index a0e10ae..a102076 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -994,6 +994,8 @@ static void hdmi_conf_init(struct hdmi_context *hdata)
>         /* choose HDMI mode */
>         hdmi_reg_writemask(hdata, HDMI_MODE_SEL,
>                 HDMI_MODE_HDMI_EN, HDMI_MODE_MASK);
> +       /* Apply Video preable and Guard band in HDMI mode only */
> +       hdmi_reg_writeb(hdata, HDMI_CON_2, 0);

Isn't hdmi_conf_init function always called after hdmi core is reset?
And HDMI_CON_2 would have 0 as reset value. It seems that your code
isn't meaningful.

If you want to set HDMI_CON_2 to HDMI mode in there then it would
better to use meaningful macro, HDMI_VID_PREAMBLE_DIS and
HDMI_GUARD_BAND_DIS.

Thanks,
Inki Dae

>         /* disable bluescreen */
>         hdmi_reg_writemask(hdata, HDMI_CON_0, 0, HDMI_BLUE_SCR_EN);
>
> --
> 1.7.9.5
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel