[RFC PATCH 9/9] ARM: dts: exynos4412-trats2: add panel node

[Andrzej Hajda]

The patch adds s6e8aa0 panel node for trats2.
It adds also trats2 specific properties for DSI
and regulator required by panel.

Signed-off-by: Andrzej Hajda <a.hajda at samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 45 +++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 2867c4e..3243b76 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -442,6 +442,15 @@
 		};
 	};
 
+	lcd_vdd3_reg: voltage-regulator at 1 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_VDD_2.2V";
+		regulator-min-microvolt = <2200000>;
+		regulator-max-microvolt = <2200000>;
+		gpio = <&gpc0 1 0>;
+		enable-active-high;
+	};
+
 	sdhci at 12510000 {
 		bus-width = <8>;
 		non-removable;
@@ -498,6 +507,42 @@
 		};
 	};
 
+	dsi_0: dsi at 11C80000 {
+		vddcore-supply = <&ldo8_reg>;
+		vddio-supply = <&ldo10_reg>;
+		samsung,pll-clk-freq = <24000000>;
+		status = "okay";
+
+		panel at 0 {
+			compatible = "samsung,s6e8aa0";
+			reg = <0>;
+			vdd3-supply = <&lcd_vdd3_reg>;
+			vci-supply = <&ldo25_reg>;
+			reset-gpio = <&gpy4 5 0>;
+			power-on-delay= <50>;
+			reset-delay = <100>;
+			init-delay = <100>;
+			flip-horizontal;
+			flip-vertical;
+			samsung,panel-width-mm = <58>;
+			samsung,panel-height-mm = <103>;
+
+			display-timings {
+				timing-0 {
+					clock-frequency = <0>;
+					hactive = <720>;
+					vactive = <1280>;
+					hfront-porch = <5>;
+					hback-porch = <5>;
+					hsync-len = <5>;
+					vfront-porch = <13>;
+					vback-porch = <1>;
+					vsync-len = <2>;
+				};
+			};
+		};
+	};
+
 	fimd at 11c00000 {
 		samsung,fimd-vidout-rgb;
 		samsung,fimd-inv-vclk;
-- 
1.8.3.2