[PATCH] drm/radeon: fix DAC interrupt handling on DCE5+

[Alex Deucher]

DCE5 and newer hardware only has 1 DAC.  Use the correct
offset.  This may fix display problems on certain board
configurations.

Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Cc: stable at vger.kernel.org
---
 drivers/gpu/drm/radeon/evergreen.c | 4 ++--
 drivers/gpu/drm/radeon/si.c        | 2 +-
 drivers/gpu/drm/radeon/sid.h       | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 4116d02..f2b9e21 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4348,8 +4348,8 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev)
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 
-	/* only one DAC on DCE6 */
-	if (!ASIC_IS_DCE6(rdev))
+	/* only one DAC on DCE5 */
+	if (!ASIC_IS_DCE5(rdev))
 		WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
 	WREG32(DACB_AUTODETECT_INT_CONTROL, 0);
 
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index e641725..09ec4f6 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5682,7 +5682,7 @@ static void si_disable_interrupt_state(struct radeon_device *rdev)
 	}
 
 	if (!ASIC_IS_NODCE(rdev)) {
-		WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
+		WREG32(DAC_AUTODETECT_INT_CONTROL, 0);
 
 		tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
 		WREG32(DC_HPD1_INT_CONTROL, tmp);
diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h
index caa3e61..9239a6d 100644
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -822,7 +822,7 @@
 #       define GRPH_PFLIP_INT_MASK                      (1 << 0)
 #       define GRPH_PFLIP_INT_TYPE                      (1 << 8)
 
-#define	DACA_AUTODETECT_INT_CONTROL			0x66c8
+#define	DAC_AUTODETECT_INT_CONTROL			0x67c8
 
 #define DC_HPD1_INT_STATUS                              0x601c
 #define DC_HPD2_INT_STATUS                              0x6028
-- 
1.8.3.1