[PATCH v3 02/11] mfd: add documentation for atmel-hlcdc DT bindings
Boris BREZILLON
boris.brezillon at free-electrons.com
Mon Jul 7 07:51:02 PDT 2014
The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
family or sama5d3 family) exposes 2 subdevices:
- a display controller (controlled by a DRM driver)
- a PWM chip
This patch adds documentation for atmel-hlcdc DT bindings.
Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
---
.../devicetree/bindings/mfd/atmel-hlcdc.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
new file mode 100644
index 0000000..294048a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -0,0 +1,40 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+ "atmel,sama5d3-hlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+ Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
+
+Example:
+
+ hlcdc: hlcdc at f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-dc";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default", "rgb-444", "rgb-565", "rgb-666", "rgb-888";
+ pinctrl-0 = <&pinctrl_lcd_base>;
+ pinctrl-1 = <&pinctrl_lcd_base &pinctrl_lcd_rgb444>;
+ pinctrl-2 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+ pinctrl-3 = <&pinctrl_lcd_base &pinctrl_lcd_rgb666>;
+ pinctrl-4 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
--
1.8.3.2
More information about the dri-devel
mailing list