[PATCH v5 05/14] drm/exynos: dsi: add pass TE host ops to support LCD I80 interface

[YoungJun Cho]

Hi Thierry,

Thank you for comment.

On 07/10/2014 04:38 PM, Thierry Reding wrote:
> On Thu, Jul 10, 2014 at 10:06:07AM +0900, YoungJun Cho wrote:
>> On 07/10/2014 12:22 AM, Thierry Reding wrote:
>>> On Tue, Jul 08, 2014 at 09:39:38AM +0900, YoungJun Cho wrote:
>>>> To support LCD I80 interface, the DSI host calls this function
>>>> to notify the panel tearing effect synchronization signal to
>>>> the CRTC device manager to trigger to transfer video image.
>>>>
>>>> Signed-off-by: YoungJun Cho <yj44.cho at samsung.com>
>>>> Acked-by: Inki Dae <inki.dae at samsung.com>
>>>> Acked-by: Kyungmin Park <kyungmin.park at samsung.com>
>>>> ---
>>>>   drivers/gpu/drm/exynos/exynos_drm_dsi.c | 11 +++++++++++
>>>>   include/drm/drm_mipi_dsi.h              |  7 +++++++
>>>>   2 files changed, 18 insertions(+)
>>>>
>>>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>>>> index dad543a..76e34ca 100644
>>>> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>>>> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
>>>> @@ -24,6 +24,7 @@
>>>>   #include <video/mipi_display.h>
>>>>   #include <video/videomode.h>
>>>>
>>>> +#include "exynos_drm_crtc.h"
>>>>   #include "exynos_drm_drv.h"
>>>>
>>>>   /* returns true iff both arguments logically differs */
>>>> @@ -1041,10 +1042,20 @@ static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
>>>>   	return (ret < 0) ? ret : xfer.rx_done;
>>>>   }
>>>>
>>>> +static void exynos_dsi_host_pass_te(struct mipi_dsi_host *host)
>>>> +{
>>>> +	struct exynos_dsi *dsi = host_to_dsi(host);
>>>> +	struct drm_encoder *encoder = dsi->encoder;
>>>> +
>>>> +	if (dsi->state & DSIM_STATE_ENABLED)
>>>> +		exynos_drm_crtc_te_handler(encoder->crtc);
>>>> +}
>>>> +
>>>>   static const struct mipi_dsi_host_ops exynos_dsi_ops = {
>>>>   	.attach = exynos_dsi_host_attach,
>>>>   	.detach = exynos_dsi_host_detach,
>>>>   	.transfer = exynos_dsi_host_transfer,
>>>> +	.pass_te = exynos_dsi_host_pass_te,
>>>>   };
>>>>
>>>>   static int exynos_dsi_poweron(struct exynos_dsi *dsi)
>>>> diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
>>>> index 944f33f..3f21bea 100644
>>>> --- a/include/drm/drm_mipi_dsi.h
>>>> +++ b/include/drm/drm_mipi_dsi.h
>>>> @@ -49,6 +49,12 @@ struct mipi_dsi_msg {
>>>>    * @detach: detach DSI device from DSI host
>>>>    * @transfer: send and/or receive DSI packet, return number of received bytes,
>>>>    * 	      or error
>>>> + * @pass_te: call the crtc te_handler() callback from DSI host.
>>>> + *	     The panel generates tearing effect synchronization signal between
>>>> + *	     MCU and FB to display video images. And the display controller
>>>> + *	     should trigger to transfer video image at this signal. So the panel
>>>> + *	     receives the TE IRQ, then calls this function to notify it to the
>>>> + *	     display controller.
>>>>    */
>>>>   struct mipi_dsi_host_ops {
>>>>   	int (*attach)(struct mipi_dsi_host *host,
>>>> @@ -57,6 +63,7 @@ struct mipi_dsi_host_ops {
>>>>   		      struct mipi_dsi_device *dsi);
>>>>   	ssize_t (*transfer)(struct mipi_dsi_host *host,
>>>>   			    struct mipi_dsi_msg *msg);
>>>> +	void (*pass_te)(struct mipi_dsi_host *host);
>>>
>>> I've objected to this particular change before and that objection still
>>> stands. I don't see how this is related to DSI. It seems like an
>>> implementation detail of this particular setup and I think it should be
>>> handled differently (within the Exynos DSI controller implementation
>>> possibly).
>>>
>>
>> Okay, I understand what you mean.
>> As you know, this function is called by panel TE interrupt handler, so it
>> could be accessed by panel.
>> Do you have any good idea for panel to access exynos_drm_dsi directly
>> without mipi_dis_host_ops?
>
> I've gone through the DSI specification again and the only mention of
> the tearing effect is in section 8.12 "TE Signaling in DSI". That says
> the following:
>
> 	A Command Mode display module has its own timing controller and
> 	local frame buffer for display refresh. In some cases the host
> 	processor needs to be notified of timing events on the display
> 	module, e.g. the start of vertical blanking or similar timing
> 	information. In a traditional parallel-bus interface like DBI-2,
> 	a dedicated signal wire labeled TE (Tearing Effect) is provided
> 	to convey such timing information to the host processor. In a
> 	DSI system, the same information, with reasonably low latency,
> 	shall be transmitted from the display module to the host
> 	processor when requested, using the bidirectional Data Lane.
>
> My interpretation of that is that a DSI peripheral doesn't have a
> dedicated TE signal. Now the panel that you want to support here seems
> to have one, so I'm wondering if maybe it isn't a DSI panel at all but
> rather DBI.

Uhm, this panel is DSI panel right. It provides TE external pad to 
transfer TE pulse to host AP and it also provides TE relevant 3 DCS, so 
host AP could choose either of them.
But I think it's better to use IRQ instead of polling method.

As Inki commented before, I'll try to use remote-endpoint property of 
DSI device node in exynos DSIM driver and call FIMD notifier.

Thank you.
Best regards YJ

>
> The specification goes into further detail about how to perform the TE
> reporting in DSI. Essentially it consists of giving the peripheral
> control of the bus via a BTA and then waiting for the peripheral to
> report back with the TE event.
>
> It would really help if somebody could find a datasheet for the panel so
> that we don't have to keep guessing what the actual interface is and how
> it's supposed to work.
>
> Thierry
>