[PATCH v6 10/14] drm/panel: add S6E3FA0 driver

[YoungJun Cho]

Hi Thierry,

Now I understand what you mean.

I'll implement common DSI helper functions.

Thank you.
Best regards YJ

On 07/21/2014 06:35 PM, Thierry Reding wrote:
> On Fri, Jul 18, 2014 at 10:49:35AM +0900, YoungJun Cho wrote:
>> Hi Thierry,
>>
>> Thank you a lot for kind comments.
>>
>> On 07/17/2014 07:36 PM, Thierry Reding wrote:
>>> On Thu, Jul 17, 2014 at 06:01:25PM +0900, YoungJun Cho wrote:
> [...]
>>>> diff --git a/drivers/gpu/drm/panel/panel-s6e3fa0.c b/drivers/gpu/drm/panel/panel-s6e3fa0.c
> [...]
>>>> +static void s6e3fa0_set_maximum_return_packet_size(struct s6e3fa0 *ctx,
>>>> +							unsigned int size)
>>>> +{
>>>> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>>>> +	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
>>>> +
>>>> +	if (ops && ops->transfer) {
>>>> +		unsigned char buf[] = {size, 0};
>>>> +		struct mipi_dsi_msg msg = {
>>>> +			.channel = dsi->channel,
>>>> +			.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
>>>> +			.tx_len = sizeof(buf),
>>>> +			.tx_buf = buf
>>>> +		};
>>>> +
>>>> +		ops->transfer(dsi->host, &msg);
>>>> +	}
>>>> +}
>>>
>>> The Set Maximum Return Packet Size command is a standard command, so
>>> please turn that into a generic function exposed by the DSI core.
>>>
>>
>> For this and below standard DCS commands, you want to use generic functions,
>> but I have no idea for that.
>> Could you explain more detail?
>
> The goal should be to make these standard DCS commands available to all
> DSI peripherals, so the implementation should look something like this:
>
> static int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi,
> 						   u16 size)
> {
> 	struct mipi_dsi_msg msg;
>
> 	if (!dsi->ops || !dsi->ops->transfer)
> 		return -ENOSYS;
>
> 	memset(&msg, 0, sizeof(msg));
> 	msg.channel = dsi->channel;
> 	msg.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE;
> 	msg.tx_len = sizeof(size);
> 	msg.tx_buf = &size;
>
> 	return dsi->ops->transfer(dsi->host, &msg);
> }
>
> The above is somewhat special, since it isn't DCS. For DCS I'd suggest a
> common prefix, like so:
>
> enum mipi_dcs_tear_mode {
> 	MIPI_DCS_TEAR_VBLANK,
> 	MIPI_DCS_TEAR_BLANK,
> };
>
> static int mipi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
> 				enum mipi_dcs_tear_mode mode)
> {
> 	u8 data[2] = { MIPI_DSI_DCS_SET_TEAR_ON, mode };
> 	struct mipi_dsi_msg msg;
>
> 	if (!dsi->ops || !dsi->ops->transfer)
> 		return -ENOSYS;
>
> 	memset(&msg, 0, sizeof(msg));
> 	msg.channel = dsi->channel;
> 	msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
> 	msg.tx_len = sizeof(data);
> 	msg.tx_buf = data;
>
> 	return dsi->ops->transfer(dsi->host, &msg);
> }
>
> Thierry
>