[PATCH] imx-drm: imx-drm-core: add suspend/resume support

[Russell King - ARM Linux]

On Thu, Jul 24, 2014 at 11:47:55AM +0200, Lucas Stach wrote:
> Am Donnerstag, den 24.07.2014, 17:17 +0800 schrieb Shawn Guo:
> > HDMI currently stops working after a system suspend/resume cycle.  It
> > turns out that the cause is the imx-hdmi encoder .dpms hook doesn't get
> > called from anywhere across suspend/resume cycle.
> > 
> > The patch follows what exynos drm driver does to walk the list of
> > connectors and call their .dpms function from suspend/resume hook.  And
> > the connectors' .dpms function will in turn filter down to the .dpms
> > hooks of encoders and CRTCs.
> > 
> > With this change, HDMI can continue working after a suspend/resume
> > cycle.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
> > ---
> > Tested with HDMI and LVDS.  It'd be great if someone can help test TVE
> > to ensure the patch doesn't break anything.
> > 
> >  drivers/staging/imx-drm/imx-drm-core.c | 39 ++++++++++++++++++++++++++++++++++
> >  1 file changed, 39 insertions(+)
> > 
> > diff --git a/drivers/staging/imx-drm/imx-drm-core.c b/drivers/staging/imx-drm/imx-drm-core.c
> > index def8280d7ee6..b0ea1f0ed32f 100644
> > --- a/drivers/staging/imx-drm/imx-drm-core.c
> > +++ b/drivers/staging/imx-drm/imx-drm-core.c
> > @@ -696,6 +696,44 @@ static int imx_drm_platform_remove(struct platform_device *pdev)
> >  	return 0;
> >  }
> >  
> > +#if CONFIG_PM_SLEEP
> 
> use #ifdef
> 
> > +static int imx_drm_suspend(struct device *dev)
> > +{
> > +	struct drm_device *drm_dev = dev_get_drvdata(dev);
> > +	struct drm_connector *connector;
> > +
> > +	drm_kms_helper_poll_disable(drm_dev);
> > +
> 
> That's ok.
> 
> > +	drm_modeset_lock_all(drm_dev);
> > +	list_for_each_entry(connector, &drm_dev->mode_config.connector_list, head) {
> > +		if (connector->funcs->dpms)
> > +			connector->funcs->dpms(connector, DRM_MODE_DPMS_OFF);
> > +	}
> 
> Don't touch DPMS state here. See below.

In which case, how else does the hardware get placed into a low power
mode on suspend?

DRM has nothing provided, and this is left up to each DRM driver to
implement (probably because it tends to be very driver specific.)
i915 for example calls the CRTC DPMS function with DRM_MODE_DPMS_OFF.

This provides a similar mechanism, but also informs the connector, any
bridge, and encoder associated with the connector as well as the CRTC
to place themselves into a low power mode (which is what
DRM_MODE_DPMS_OFF should be doing anyway.)

> > +static int imx_drm_resume(struct device *dev)
> > +{
> > +	struct drm_device *drm_dev = dev_get_drvdata(dev);
> > +	struct drm_connector *connector;
> > +
> > +	drm_modeset_lock_all(drm_dev);
> > +	list_for_each_entry(connector, &drm_dev->mode_config.connector_list, head) {
> > +		if (connector->funcs->dpms)
> > +			connector->funcs->dpms(connector, DRM_MODE_DPMS_ON);
> > +	}
> > +	drm_modeset_unlock_all(drm_dev);
> > +
> This forcefully enables all connectors, which might not have been the
> state before suspend. Have a look at simply using
> drm_helper_resume_force_mode(), which should do the right thing.

Yes, we agree there.

-- 
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.