[PATCH v8 04/11] drm: sti: add HDMI driver
Benjamin Gaignard
benjamin.gaignard at linaro.org
Wed Jul 30 10:42:00 PDT 2014
Add driver for HDMI output.
HDMI PHY registers are mixed into HDMI device registers
and their is only one IRQ for all this hardware block.
That is why PHYs aren't using phy framework but only a
thin hdmi_phy_ops structure with start and stop functions.
HDMI driver is mapped on drm_bridge and drm_connector structures.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
Reviewed-by: Rob Clark <robdclark at gmail.com>
---
drivers/gpu/drm/sti/Makefile | 7 +-
drivers/gpu/drm/sti/sti_hdmi.c | 810 +++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_hdmi.h | 88 ++++
drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c | 336 ++++++++++++
drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h | 14 +
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c | 211 ++++++++
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h | 14 +
7 files changed, 1479 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_hdmi.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi.h
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
create mode 100644 drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 1534d4c..12e1a07 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -1,3 +1,8 @@
+stihdmi-y := sti_hdmi.o \
+ sti_hdmi_tx3g0c55phy.o \
+ sti_hdmi_tx3g4c28phy.o \
+
obj-$(CONFIG_DRM_STI) = \
sti_vtg.o \
- sti_vtac.o
\ No newline at end of file
+ sti_vtac.o \
+ stihdmi.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
new file mode 100644
index 0000000..284e541
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -0,0 +1,810 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou at st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/hdmi.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+
+#include "sti_hdmi.h"
+#include "sti_hdmi_tx3g4c28phy.h"
+#include "sti_hdmi_tx3g0c55phy.h"
+#include "sti_vtg.h"
+
+#define HDMI_CFG 0x0000
+#define HDMI_INT_EN 0x0004
+#define HDMI_INT_STA 0x0008
+#define HDMI_INT_CLR 0x000C
+#define HDMI_STA 0x0010
+#define HDMI_ACTIVE_VID_XMIN 0x0100
+#define HDMI_ACTIVE_VID_XMAX 0x0104
+#define HDMI_ACTIVE_VID_YMIN 0x0108
+#define HDMI_ACTIVE_VID_YMAX 0x010C
+#define HDMI_DFLT_CHL0_DAT 0x0110
+#define HDMI_DFLT_CHL1_DAT 0x0114
+#define HDMI_DFLT_CHL2_DAT 0x0118
+#define HDMI_SW_DI_1_HEAD_WORD 0x0210
+#define HDMI_SW_DI_1_PKT_WORD0 0x0214
+#define HDMI_SW_DI_1_PKT_WORD1 0x0218
+#define HDMI_SW_DI_1_PKT_WORD2 0x021C
+#define HDMI_SW_DI_1_PKT_WORD3 0x0220
+#define HDMI_SW_DI_1_PKT_WORD4 0x0224
+#define HDMI_SW_DI_1_PKT_WORD5 0x0228
+#define HDMI_SW_DI_1_PKT_WORD6 0x022C
+#define HDMI_SW_DI_CFG 0x0230
+
+#define HDMI_IFRAME_SLOT_AVI 1
+
+#define XCAT(prefix, x, suffix) prefix ## x ## suffix
+#define HDMI_SW_DI_N_HEAD_WORD(x) XCAT(HDMI_SW_DI_, x, _HEAD_WORD)
+#define HDMI_SW_DI_N_PKT_WORD0(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD0)
+#define HDMI_SW_DI_N_PKT_WORD1(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD1)
+#define HDMI_SW_DI_N_PKT_WORD2(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD2)
+#define HDMI_SW_DI_N_PKT_WORD3(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD3)
+#define HDMI_SW_DI_N_PKT_WORD4(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD4)
+#define HDMI_SW_DI_N_PKT_WORD5(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD5)
+#define HDMI_SW_DI_N_PKT_WORD6(x) XCAT(HDMI_SW_DI_, x, _PKT_WORD6)
+
+#define HDMI_IFRAME_DISABLED 0x0
+#define HDMI_IFRAME_SINGLE_SHOT 0x1
+#define HDMI_IFRAME_FIELD 0x2
+#define HDMI_IFRAME_FRAME 0x3
+#define HDMI_IFRAME_MASK 0x3
+#define HDMI_IFRAME_CFG_DI_N(x, n) ((x) << ((n-1)*4)) /* n from 1 to 6 */
+
+#define HDMI_CFG_DEVICE_EN BIT(0)
+#define HDMI_CFG_HDMI_NOT_DVI BIT(1)
+#define HDMI_CFG_HDCP_EN BIT(2)
+#define HDMI_CFG_ESS_NOT_OESS BIT(3)
+#define HDMI_CFG_H_SYNC_POL_NEG BIT(4)
+#define HDMI_CFG_SINK_TERM_DET_EN BIT(5)
+#define HDMI_CFG_V_SYNC_POL_NEG BIT(6)
+#define HDMI_CFG_422_EN BIT(8)
+#define HDMI_CFG_FIFO_OVERRUN_CLR BIT(12)
+#define HDMI_CFG_FIFO_UNDERRUN_CLR BIT(13)
+#define HDMI_CFG_SW_RST_EN BIT(31)
+
+#define HDMI_INT_GLOBAL BIT(0)
+#define HDMI_INT_SW_RST BIT(1)
+#define HDMI_INT_PIX_CAP BIT(3)
+#define HDMI_INT_HOT_PLUG BIT(4)
+#define HDMI_INT_DLL_LCK BIT(5)
+#define HDMI_INT_NEW_FRAME BIT(6)
+#define HDMI_INT_GENCTRL_PKT BIT(7)
+#define HDMI_INT_SINK_TERM_PRESENT BIT(11)
+
+#define HDMI_DEFAULT_INT (HDMI_INT_SINK_TERM_PRESENT \
+ | HDMI_INT_DLL_LCK \
+ | HDMI_INT_HOT_PLUG \
+ | HDMI_INT_GLOBAL)
+
+#define HDMI_WORKING_INT (HDMI_INT_SINK_TERM_PRESENT \
+ | HDMI_INT_GENCTRL_PKT \
+ | HDMI_INT_NEW_FRAME \
+ | HDMI_INT_DLL_LCK \
+ | HDMI_INT_HOT_PLUG \
+ | HDMI_INT_PIX_CAP \
+ | HDMI_INT_SW_RST \
+ | HDMI_INT_GLOBAL)
+
+#define HDMI_STA_SW_RST BIT(1)
+
+struct sti_hdmi_connector {
+ struct drm_connector drm_connector;
+ struct drm_encoder *encoder;
+ struct sti_hdmi *hdmi;
+};
+
+#define to_sti_hdmi_connector(x) \
+ container_of(x, struct sti_hdmi_connector, drm_connector)
+
+u32 hdmi_read(struct sti_hdmi *hdmi, int offset)
+{
+ return readl(hdmi->regs + offset);
+}
+
+void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset)
+{
+ writel(val, hdmi->regs + offset);
+}
+
+/**
+ * HDMI interrupt handler threaded
+ *
+ * @irq: irq number
+ * @arg: connector structure
+ */
+static irqreturn_t hdmi_irq_thread(int irq, void *arg)
+{
+ struct sti_hdmi *hdmi = arg;
+
+ /* Hot plug/unplug IRQ */
+ if (hdmi->irq_status & HDMI_INT_HOT_PLUG) {
+ /* read gpio to get the status */
+ hdmi->hpd = gpio_get_value(hdmi->hpd_gpio);
+ if (hdmi->drm_dev)
+ drm_helper_hpd_irq_event(hdmi->drm_dev);
+ }
+
+ /* Sw reset and PLL lock are exclusive so we can use the same
+ * event to signal them
+ */
+ if (hdmi->irq_status & (HDMI_INT_SW_RST | HDMI_INT_DLL_LCK)) {
+ hdmi->event_received = true;
+ wake_up_interruptible(&hdmi->wait_event);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * HDMI interrupt handler
+ *
+ * @irq: irq number
+ * @arg: connector structure
+ */
+static irqreturn_t hdmi_irq(int irq, void *arg)
+{
+ struct sti_hdmi *hdmi = arg;
+
+ /* read interrupt status */
+ hdmi->irq_status = hdmi_read(hdmi, HDMI_INT_STA);
+
+ /* clear interrupt status */
+ hdmi_write(hdmi, hdmi->irq_status, HDMI_INT_CLR);
+
+ /* force sync bus write */
+ hdmi_read(hdmi, HDMI_INT_STA);
+
+ return IRQ_WAKE_THREAD;
+}
+
+/**
+ * Set hdmi active area depending on the drm display mode selected
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void hdmi_active_area(struct sti_hdmi *hdmi)
+{
+ u32 xmin, xmax;
+ u32 ymin, ymax;
+
+ xmin = sti_vtg_get_pixel_number(hdmi->mode, 0);
+ xmax = sti_vtg_get_pixel_number(hdmi->mode, hdmi->mode.hdisplay - 1);
+ ymin = sti_vtg_get_line_number(hdmi->mode, 0);
+ ymax = sti_vtg_get_line_number(hdmi->mode, hdmi->mode.vdisplay - 1);
+
+ hdmi_write(hdmi, xmin, HDMI_ACTIVE_VID_XMIN);
+ hdmi_write(hdmi, xmax, HDMI_ACTIVE_VID_XMAX);
+ hdmi_write(hdmi, ymin, HDMI_ACTIVE_VID_YMIN);
+ hdmi_write(hdmi, ymax, HDMI_ACTIVE_VID_YMAX);
+}
+
+/**
+ * Overall hdmi configuration
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void hdmi_config(struct sti_hdmi *hdmi)
+{
+ u32 conf;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Clear overrun and underrun fifo */
+ conf = HDMI_CFG_FIFO_OVERRUN_CLR | HDMI_CFG_FIFO_UNDERRUN_CLR;
+
+ /* Enable HDMI mode not DVI */
+ conf |= HDMI_CFG_HDMI_NOT_DVI | HDMI_CFG_ESS_NOT_OESS;
+
+ /* Enable sink term detection */
+ conf |= HDMI_CFG_SINK_TERM_DET_EN;
+
+ /* Set Hsync polarity */
+ if (hdmi->mode.flags & DRM_MODE_FLAG_NHSYNC) {
+ DRM_DEBUG_DRIVER("H Sync Negative\n");
+ conf |= HDMI_CFG_H_SYNC_POL_NEG;
+ }
+
+ /* Set Vsync polarity */
+ if (hdmi->mode.flags & DRM_MODE_FLAG_NVSYNC) {
+ DRM_DEBUG_DRIVER("V Sync Negative\n");
+ conf |= HDMI_CFG_V_SYNC_POL_NEG;
+ }
+
+ /* Enable HDMI */
+ conf |= HDMI_CFG_DEVICE_EN;
+
+ hdmi_write(hdmi, conf, HDMI_CFG);
+}
+
+/**
+ * Prepare and configure the AVI infoframe
+ *
+ * AVI infoframe are transmitted at least once per two video field and
+ * contains information about HDMI transmission mode such as color space,
+ * colorimetry, ...
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * Return negative value if error occurs
+ */
+static int hdmi_avi_infoframe_config(struct sti_hdmi *hdmi)
+{
+ struct drm_display_mode *mode = &hdmi->mode;
+ struct hdmi_avi_infoframe infoframe;
+ u8 buffer[HDMI_INFOFRAME_SIZE(AVI)];
+ u8 *frame = buffer + HDMI_INFOFRAME_HEADER_SIZE;
+ u32 val;
+ int ret;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ ret = drm_hdmi_avi_infoframe_from_display_mode(&infoframe, mode);
+ if (ret < 0) {
+ DRM_ERROR("failed to setup AVI infoframe: %d\n", ret);
+ return ret;
+ }
+
+ /* fixed infoframe configuration not linked to the mode */
+ infoframe.colorspace = HDMI_COLORSPACE_RGB;
+ infoframe.quantization_range = HDMI_QUANTIZATION_RANGE_DEFAULT;
+ infoframe.colorimetry = HDMI_COLORIMETRY_NONE;
+
+ ret = hdmi_avi_infoframe_pack(&infoframe, buffer, sizeof(buffer));
+ if (ret < 0) {
+ DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
+ return ret;
+ }
+
+ /* Disable transmission slot for AVI infoframe */
+ val = hdmi_read(hdmi, HDMI_SW_DI_CFG);
+ val &= ~HDMI_IFRAME_CFG_DI_N(HDMI_IFRAME_MASK, HDMI_IFRAME_SLOT_AVI);
+ hdmi_write(hdmi, val, HDMI_SW_DI_CFG);
+
+ /* Infoframe header */
+ val = buffer[0x0];
+ val |= buffer[0x1] << 8;
+ val |= buffer[0x2] << 16;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_HEAD_WORD(HDMI_IFRAME_SLOT_AVI));
+
+ /* Infoframe packet bytes */
+ val = frame[0x0];
+ val |= frame[0x1] << 8;
+ val |= frame[0x2] << 16;
+ val |= frame[0x3] << 24;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD0(HDMI_IFRAME_SLOT_AVI));
+
+ val = frame[0x4];
+ val |= frame[0x5] << 8;
+ val |= frame[0x6] << 16;
+ val |= frame[0x7] << 24;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD1(HDMI_IFRAME_SLOT_AVI));
+
+ val = frame[0x8];
+ val |= frame[0x9] << 8;
+ val |= frame[0xA] << 16;
+ val |= frame[0xB] << 24;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD2(HDMI_IFRAME_SLOT_AVI));
+
+ val = frame[0xC];
+ val |= frame[0xD] << 8;
+ hdmi_write(hdmi, val, HDMI_SW_DI_N_PKT_WORD3(HDMI_IFRAME_SLOT_AVI));
+
+ /* Enable transmission slot for AVI infoframe
+ * According to the hdmi specification, AVI infoframe should be
+ * transmitted at least once per two video fields
+ */
+ val = hdmi_read(hdmi, HDMI_SW_DI_CFG);
+ val |= HDMI_IFRAME_CFG_DI_N(HDMI_IFRAME_FIELD, HDMI_IFRAME_SLOT_AVI);
+ hdmi_write(hdmi, val, HDMI_SW_DI_CFG);
+
+ return 0;
+}
+
+/**
+ * Software reset of the hdmi subsystem
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ */
+#define HDMI_TIMEOUT_SWRESET 100 /*milliseconds */
+static void hdmi_swreset(struct sti_hdmi *hdmi)
+{
+ u32 val;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Enable hdmi_audio clock only during hdmi reset */
+ if (clk_prepare_enable(hdmi->clk_audio))
+ DRM_INFO("Failed to prepare/enable hdmi_audio clk\n");
+
+ /* Sw reset */
+ hdmi->event_received = false;
+
+ val = hdmi_read(hdmi, HDMI_CFG);
+ val |= HDMI_CFG_SW_RST_EN;
+ hdmi_write(hdmi, val, HDMI_CFG);
+
+ /* Wait reset completed */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_SWRESET));
+
+ /*
+ * HDMI_STA_SW_RST bit is set to '1' when SW_RST bit in HDMI_CFG is
+ * set to '1' and clk_audio is running.
+ */
+ if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_SW_RST) == 0)
+ DRM_DEBUG_DRIVER("Warning: HDMI sw reset timeout occurs\n");
+
+ val = hdmi_read(hdmi, HDMI_CFG);
+ val &= ~HDMI_CFG_SW_RST_EN;
+ hdmi_write(hdmi, val, HDMI_CFG);
+
+ /* Disable hdmi_audio clock. Not used anymore for drm purpose */
+ clk_disable_unprepare(hdmi->clk_audio);
+}
+
+static void sti_hdmi_disable(struct drm_bridge *bridge)
+{
+ struct sti_hdmi *hdmi = bridge->driver_private;
+
+ u32 val = hdmi_read(hdmi, HDMI_CFG);
+
+ if (!hdmi->enabled)
+ return;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Disable HDMI */
+ val &= ~HDMI_CFG_DEVICE_EN;
+ hdmi_write(hdmi, val, HDMI_CFG);
+
+ hdmi_write(hdmi, 0xffffffff, HDMI_INT_CLR);
+
+ /* Stop the phy */
+ hdmi->phy_ops->stop(hdmi);
+
+ /* Set the default channel data to be a dark red */
+ hdmi_write(hdmi, 0x0000, HDMI_DFLT_CHL0_DAT);
+ hdmi_write(hdmi, 0x0000, HDMI_DFLT_CHL1_DAT);
+ hdmi_write(hdmi, 0x0060, HDMI_DFLT_CHL2_DAT);
+
+ /* Disable/unprepare hdmi clock */
+ clk_disable_unprepare(hdmi->clk_phy);
+ clk_disable_unprepare(hdmi->clk_tmds);
+ clk_disable_unprepare(hdmi->clk_pix);
+
+ hdmi->enabled = false;
+}
+
+static void sti_hdmi_pre_enable(struct drm_bridge *bridge)
+{
+ struct sti_hdmi *hdmi = bridge->driver_private;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (hdmi->enabled)
+ return;
+
+ /* Prepare/enable clocks */
+ if (clk_prepare_enable(hdmi->clk_pix))
+ DRM_ERROR("Failed to prepare/enable hdmi_pix clk\n");
+ if (clk_prepare_enable(hdmi->clk_tmds))
+ DRM_ERROR("Failed to prepare/enable hdmi_tmds clk\n");
+ if (clk_prepare_enable(hdmi->clk_phy))
+ DRM_ERROR("Failed to prepare/enable hdmi_rejec_pll clk\n");
+
+ hdmi->enabled = true;
+
+ /* Program hdmi serializer and start phy */
+ if (!hdmi->phy_ops->start(hdmi)) {
+ DRM_ERROR("Unable to start hdmi phy\n");
+ return;
+ }
+
+ /* Program hdmi active area */
+ hdmi_active_area(hdmi);
+
+ /* Enable working interrupts */
+ hdmi_write(hdmi, HDMI_WORKING_INT, HDMI_INT_EN);
+
+ /* Program hdmi config */
+ hdmi_config(hdmi);
+
+ /* Program AVI infoframe */
+ if (hdmi_avi_infoframe_config(hdmi))
+ DRM_ERROR("Unable to configure AVI infoframe\n");
+
+ /* Sw reset */
+ hdmi_swreset(hdmi);
+}
+
+static void sti_hdmi_set_mode(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct sti_hdmi *hdmi = bridge->driver_private;
+ int ret;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ /* Copy the drm display mode in the connector local structure */
+ memcpy(&hdmi->mode, mode, sizeof(struct drm_display_mode));
+
+ /* Update clock framerate according to the selected mode */
+ ret = clk_set_rate(hdmi->clk_pix, mode->clock * 1000);
+ if (ret < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for hdmi_pix clk\n",
+ mode->clock * 1000);
+ return;
+ }
+ ret = clk_set_rate(hdmi->clk_phy, mode->clock * 1000);
+ if (ret < 0) {
+ DRM_ERROR("Cannot set rate (%dHz) for hdmi_rejection_pll clk\n",
+ mode->clock * 1000);
+ return;
+ }
+}
+
+static void sti_hdmi_bridge_nope(struct drm_bridge *bridge)
+{
+ /* do nothing */
+}
+
+static void sti_hdmi_brigde_destroy(struct drm_bridge *bridge)
+{
+ drm_bridge_cleanup(bridge);
+ kfree(bridge);
+}
+
+static const struct drm_bridge_funcs sti_hdmi_bridge_funcs = {
+ .pre_enable = sti_hdmi_pre_enable,
+ .enable = sti_hdmi_bridge_nope,
+ .disable = sti_hdmi_disable,
+ .post_disable = sti_hdmi_bridge_nope,
+ .mode_set = sti_hdmi_set_mode,
+ .destroy = sti_hdmi_brigde_destroy,
+};
+
+static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+ struct i2c_adapter *i2c_adap;
+ struct edid *edid;
+ int count;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ i2c_adap = i2c_get_adapter(1);
+ if (!i2c_adap)
+ goto fail;
+
+ edid = drm_get_edid(connector, i2c_adap);
+ if (!edid)
+ goto fail;
+
+ count = drm_add_edid_modes(connector, edid);
+ drm_mode_connector_update_edid_property(connector, edid);
+
+ kfree(edid);
+ return count;
+
+fail:
+ DRM_ERROR("Can not read HDMI EDID\n");
+ return 0;
+}
+
+#define CLK_TOLERANCE_HZ 50
+
+static int sti_hdmi_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ int target = mode->clock * 1000;
+ int target_min = target - CLK_TOLERANCE_HZ;
+ int target_max = target + CLK_TOLERANCE_HZ;
+ int result;
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+ struct sti_hdmi *hdmi = hdmi_connector->hdmi;
+
+
+ result = clk_round_rate(hdmi->clk_pix, target);
+
+ DRM_DEBUG_DRIVER("target rate = %d => available rate = %d\n",
+ target, result);
+
+ if ((result < target_min) || (result > target_max)) {
+ DRM_DEBUG_DRIVER("hdmi pixclk=%d not supported\n", target);
+ return MODE_BAD;
+ }
+
+ return MODE_OK;
+}
+
+struct drm_encoder *sti_hdmi_best_encoder(struct drm_connector *connector)
+{
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+
+ /* Best encoder is the one associated during connector creation */
+ return hdmi_connector->encoder;
+}
+
+static struct drm_connector_helper_funcs sti_hdmi_connector_helper_funcs = {
+ .get_modes = sti_hdmi_connector_get_modes,
+ .mode_valid = sti_hdmi_connector_mode_valid,
+ .best_encoder = sti_hdmi_best_encoder,
+};
+
+/* get detection status of display device */
+static enum drm_connector_status
+sti_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+ struct sti_hdmi *hdmi = hdmi_connector->hdmi;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (hdmi->hpd) {
+ DRM_DEBUG_DRIVER("hdmi cable connected\n");
+ return connector_status_connected;
+ }
+
+ DRM_DEBUG_DRIVER("hdmi cable disconnected\n");
+ return connector_status_disconnected;
+}
+
+static void sti_hdmi_connector_destroy(struct drm_connector *connector)
+{
+ struct sti_hdmi_connector *hdmi_connector
+ = to_sti_hdmi_connector(connector);
+
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+ kfree(hdmi_connector);
+}
+
+static struct drm_connector_funcs sti_hdmi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = sti_hdmi_connector_detect,
+ .destroy = sti_hdmi_connector_destroy,
+};
+
+static struct drm_encoder *sti_hdmi_find_encoder(struct drm_device *dev)
+{
+ struct drm_encoder *encoder;
+
+ list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+ if (encoder->encoder_type == DRM_MODE_ENCODER_TMDS)
+ return encoder;
+ }
+
+ return NULL;
+}
+
+static int sti_hdmi_bind(struct device *dev, struct device *master, void *data)
+{
+ struct sti_hdmi *hdmi = dev_get_drvdata(dev);
+ struct drm_device *drm_dev = data;
+ struct drm_encoder *encoder;
+ struct sti_hdmi_connector *connector;
+ struct drm_connector *drm_connector;
+ struct drm_bridge *bridge;
+ struct i2c_adapter *i2c_adap;
+ int err;
+
+ i2c_adap = i2c_get_adapter(1);
+ if (!i2c_adap)
+ return -EPROBE_DEFER;
+
+ /* Set the drm device handle */
+ hdmi->drm_dev = drm_dev;
+
+ encoder = sti_hdmi_find_encoder(drm_dev);
+ if (!encoder)
+ return -ENOMEM;
+
+ connector = devm_kzalloc(dev, sizeof(*connector), GFP_KERNEL);
+ if (!connector)
+ return -ENOMEM;
+
+ connector->hdmi = hdmi;
+
+ bridge = devm_kzalloc(dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge)
+ return -ENOMEM;
+
+ bridge->driver_private = hdmi;
+ drm_bridge_init(drm_dev, bridge, &sti_hdmi_bridge_funcs);
+
+ encoder->bridge = bridge;
+ connector->encoder = encoder;
+
+ drm_connector = (struct drm_connector *)connector;
+
+ drm_connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ drm_connector_init(drm_dev, drm_connector,
+ &sti_hdmi_connector_funcs, DRM_MODE_CONNECTOR_HDMIA);
+ drm_connector_helper_add(drm_connector,
+ &sti_hdmi_connector_helper_funcs);
+
+ err = drm_connector_register(drm_connector);
+ if (err)
+ goto err_connector;
+
+ err = drm_mode_connector_attach_encoder(drm_connector, encoder);
+ if (err) {
+ DRM_ERROR("Failed to attach a connector to a encoder\n");
+ goto err_sysfs;
+ }
+
+ /* Enable default interrupts */
+ hdmi_write(hdmi, HDMI_DEFAULT_INT, HDMI_INT_EN);
+
+ return 0;
+
+err_sysfs:
+ drm_connector_unregister(drm_connector);
+err_connector:
+ drm_bridge_cleanup(bridge);
+ drm_connector_cleanup(drm_connector);
+ return -EINVAL;
+}
+
+static void sti_hdmi_unbind(struct device *dev,
+ struct device *master, void *data)
+{
+ /* do nothing */
+}
+
+static const struct component_ops sti_hdmi_ops = {
+ .bind = sti_hdmi_bind,
+ .unbind = sti_hdmi_unbind,
+};
+
+static struct of_device_id hdmi_of_match[] = {
+ {
+ .compatible = "st,stih416-hdmi",
+ .data = &tx3g0c55phy_ops,
+ }, {
+ .compatible = "st,stih407-hdmi",
+ .data = &tx3g4c28phy_ops,
+ }, {
+ /* end node */
+ }
+};
+MODULE_DEVICE_TABLE(of, hdmi_of_match);
+
+static int sti_hdmi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sti_hdmi *hdmi;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ int ret;
+
+ DRM_INFO("%s\n", __func__);
+
+ hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+ if (!hdmi)
+ return -ENOMEM;
+
+ hdmi->dev = pdev->dev;
+
+ /* Get resources */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hdmi-reg");
+ if (!res) {
+ DRM_ERROR("Invalid hdmi resource\n");
+ return -ENOMEM;
+ }
+ hdmi->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
+ if (IS_ERR(hdmi->regs))
+ return PTR_ERR(hdmi->regs);
+
+ if (of_device_is_compatible(np, "st,stih416-hdmi")) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "syscfg");
+ if (!res) {
+ DRM_ERROR("Invalid syscfg resource\n");
+ return -ENOMEM;
+ }
+ hdmi->syscfg = devm_ioremap_nocache(dev, res->start,
+ resource_size(res));
+ if (IS_ERR(hdmi->syscfg))
+ return PTR_ERR(hdmi->syscfg);
+
+ }
+
+ hdmi->phy_ops = (struct hdmi_phy_ops *)
+ of_match_node(hdmi_of_match, np)->data;
+
+ /* Get clock resources */
+ hdmi->clk_pix = devm_clk_get(dev, "pix");
+ if (IS_ERR(hdmi->clk_pix)) {
+ DRM_ERROR("Cannot get hdmi_pix clock\n");
+ return PTR_ERR(hdmi->clk_pix);
+ }
+
+ hdmi->clk_tmds = devm_clk_get(dev, "tmds");
+ if (IS_ERR(hdmi->clk_tmds)) {
+ DRM_ERROR("Cannot get hdmi_tmds clock\n");
+ return PTR_ERR(hdmi->clk_tmds);
+ }
+
+ hdmi->clk_phy = devm_clk_get(dev, "phy");
+ if (IS_ERR(hdmi->clk_phy)) {
+ DRM_ERROR("Cannot get hdmi_phy clock\n");
+ return PTR_ERR(hdmi->clk_phy);
+ }
+
+ hdmi->clk_audio = devm_clk_get(dev, "audio");
+ if (IS_ERR(hdmi->clk_audio)) {
+ DRM_ERROR("Cannot get hdmi_audio clock\n");
+ return PTR_ERR(hdmi->clk_audio);
+ }
+
+ hdmi->hpd_gpio = of_get_named_gpio(np, "hdmi,hpd-gpio", 0);
+ if (hdmi->hpd_gpio < 0) {
+ DRM_ERROR("Failed to get hdmi hpd-gpio\n");
+ return -EIO;
+ }
+
+ hdmi->hpd = gpio_get_value(hdmi->hpd_gpio);
+
+ init_waitqueue_head(&hdmi->wait_event);
+
+ hdmi->irq = platform_get_irq_byname(pdev, "irq");
+
+ ret = devm_request_threaded_irq(dev, hdmi->irq, hdmi_irq,
+ hdmi_irq_thread, IRQF_ONESHOT, dev_name(dev), hdmi);
+ if (ret) {
+ DRM_ERROR("Failed to register HDMI interrupt\n");
+ return ret;
+ }
+
+ hdmi->reset = devm_reset_control_get(dev, "hdmi");
+ /* Take hdmi out of reset */
+ if (!IS_ERR(hdmi->reset))
+ reset_control_deassert(hdmi->reset);
+
+ platform_set_drvdata(pdev, hdmi);
+
+ return component_add(&pdev->dev, &sti_hdmi_ops);
+}
+
+static int sti_hdmi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &sti_hdmi_ops);
+ return 0;
+}
+
+struct platform_driver sti_hdmi_driver = {
+ .driver = {
+ .name = "sti-hdmi",
+ .owner = THIS_MODULE,
+ .of_match_table = hdmi_of_match,
+ },
+ .probe = sti_hdmi_probe,
+ .remove = sti_hdmi_remove,
+};
+
+module_platform_driver(sti_hdmi_driver);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard at st.com>");
+MODULE_DESCRIPTION("STMicroelectronics SoC DRM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h
new file mode 100644
index 0000000..61bec65
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou at st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_HDMI_H_
+#define _STI_HDMI_H_
+
+#include <linux/platform_device.h>
+
+#include <drm/drmP.h>
+
+#define HDMI_STA 0x0010
+#define HDMI_STA_DLL_LCK BIT(5)
+
+struct sti_hdmi;
+
+struct hdmi_phy_ops {
+ bool (*start)(struct sti_hdmi *hdmi);
+ void (*stop)(struct sti_hdmi *hdmi);
+};
+
+/**
+ * STI hdmi structure
+ *
+ * @dev: driver device
+ * @drm_dev: pointer to drm device
+ * @mode: current display mode selected
+ * @regs: hdmi register
+ * @syscfg: syscfg register for pll rejection configuration
+ * @clk_pix: hdmi pixel clock
+ * @clk_tmds: hdmi tmds clock
+ * @clk_phy: hdmi phy clock
+ * @clk_audio: hdmi audio clock
+ * @irq: hdmi interrupt number
+ * @irq_status: interrupt status register
+ * @phy_ops: phy start/stop operations
+ * @enabled: true if hdmi is enabled else false
+ * @hpd_gpio: hdmi hot plug detect gpio number
+ * @hpd: hot plug detect status
+ * @wait_event: wait event
+ * @event_received: wait event status
+ * @reset: reset control of the hdmi phy
+ */
+struct sti_hdmi {
+ struct device dev;
+ struct drm_device *drm_dev;
+ struct drm_display_mode mode;
+ void __iomem *regs;
+ void __iomem *syscfg;
+ struct clk *clk_pix;
+ struct clk *clk_tmds;
+ struct clk *clk_phy;
+ struct clk *clk_audio;
+ int irq;
+ u32 irq_status;
+ struct hdmi_phy_ops *phy_ops;
+ bool enabled;
+ int hpd_gpio;
+ bool hpd;
+ wait_queue_head_t wait_event;
+ bool event_received;
+ struct reset_control *reset;
+};
+
+u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
+void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);
+
+/**
+ * hdmi phy config structure
+ *
+ * A pointer to an array of these structures is passed to a TMDS (HDMI) output
+ * via the control interface to provide board and SoC specific
+ * configurations of the HDMI PHY. Each entry in the array specifies a hardware
+ * specific configuration for a given TMDS clock frequency range.
+ *
+ * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
+ * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
+ * @config: SoC specific register configuration
+ */
+struct hdmi_phy_config {
+ u32 min_tmds_freq;
+ u32 max_tmds_freq;
+ u32 config[4];
+};
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
new file mode 100644
index 0000000..49ae8e4
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.c
@@ -0,0 +1,336 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou at st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "sti_hdmi_tx3g0c55phy.h"
+
+#define HDMI_SRZ_PLL_CFG 0x0504
+#define HDMI_SRZ_TAP_1 0x0508
+#define HDMI_SRZ_TAP_2 0x050C
+#define HDMI_SRZ_TAP_3 0x0510
+#define HDMI_SRZ_CTRL 0x0514
+
+#define HDMI_SRZ_PLL_CFG_POWER_DOWN BIT(0)
+#define HDMI_SRZ_PLL_CFG_VCOR_SHIFT 1
+#define HDMI_SRZ_PLL_CFG_VCOR_425MHZ 0
+#define HDMI_SRZ_PLL_CFG_VCOR_850MHZ 1
+#define HDMI_SRZ_PLL_CFG_VCOR_1700MHZ 2
+#define HDMI_SRZ_PLL_CFG_VCOR_3000MHZ 3
+#define HDMI_SRZ_PLL_CFG_VCOR_MASK 3
+#define HDMI_SRZ_PLL_CFG_VCOR(x) (x << HDMI_SRZ_PLL_CFG_VCOR_SHIFT)
+#define HDMI_SRZ_PLL_CFG_NDIV_SHIFT 8
+#define HDMI_SRZ_PLL_CFG_NDIV_MASK (0x1F << HDMI_SRZ_PLL_CFG_NDIV_SHIFT)
+#define HDMI_SRZ_PLL_CFG_MODE_SHIFT 16
+#define HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ 0x1
+#define HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ 0x4
+#define HDMI_SRZ_PLL_CFG_MODE_27_MHZ 0x5
+#define HDMI_SRZ_PLL_CFG_MODE_33_75_MHZ 0x6
+#define HDMI_SRZ_PLL_CFG_MODE_40_5_MHZ 0x7
+#define HDMI_SRZ_PLL_CFG_MODE_54_MHZ 0x8
+#define HDMI_SRZ_PLL_CFG_MODE_67_5_MHZ 0x9
+#define HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ 0xA
+#define HDMI_SRZ_PLL_CFG_MODE_81_MHZ 0xB
+#define HDMI_SRZ_PLL_CFG_MODE_82_5_MHZ 0xC
+#define HDMI_SRZ_PLL_CFG_MODE_108_MHZ 0xD
+#define HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ 0xE
+#define HDMI_SRZ_PLL_CFG_MODE_165_MHZ 0xF
+#define HDMI_SRZ_PLL_CFG_MODE_MASK 0xF
+#define HDMI_SRZ_PLL_CFG_MODE(x) (x << HDMI_SRZ_PLL_CFG_MODE_SHIFT)
+
+#define HDMI_SRZ_CTRL_POWER_DOWN (1 << 0)
+#define HDMI_SRZ_CTRL_EXTERNAL_DATA_EN (1 << 1)
+
+/* sysconf registers */
+#define HDMI_REJECTION_PLL_CONFIGURATION 0x0858 /* SYSTEM_CONFIG2534 */
+#define HDMI_REJECTION_PLL_STATUS 0x0948 /* SYSTEM_CONFIG2594 */
+
+#define REJECTION_PLL_HDMI_ENABLE_SHIFT 0
+#define REJECTION_PLL_HDMI_ENABLE_MASK (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT)
+#define REJECTION_PLL_HDMI_PDIV_SHIFT 24
+#define REJECTION_PLL_HDMI_PDIV_MASK (0x7 << REJECTION_PLL_HDMI_PDIV_SHIFT)
+#define REJECTION_PLL_HDMI_NDIV_SHIFT 16
+#define REJECTION_PLL_HDMI_NDIV_MASK (0xFF << REJECTION_PLL_HDMI_NDIV_SHIFT)
+#define REJECTION_PLL_HDMI_MDIV_SHIFT 8
+#define REJECTION_PLL_HDMI_MDIV_MASK (0xFF << REJECTION_PLL_HDMI_MDIV_SHIFT)
+
+#define REJECTION_PLL_HDMI_REJ_PLL_LOCK BIT(0)
+
+#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */
+
+/**
+ * pll mode structure
+ *
+ * A pointer to an array of these structures is passed to a TMDS (HDMI) output
+ * via the control interface to provide board and SoC specific
+ * configurations of the HDMI PHY. Each entry in the array specifies a hardware
+ * specific configuration for a given TMDS clock frequency range. The array
+ * should be terminated with an entry that has all fields set to zero.
+ *
+ * @min: Lower bound of TMDS clock frequency this entry applies to
+ * @max: Upper bound of TMDS clock frequency this entry applies to
+ * @mode: SoC specific register configuration
+ */
+struct pllmode {
+ u32 min;
+ u32 max;
+ u32 mode;
+};
+
+#define NB_PLL_MODE 7
+static struct pllmode pllmodes[NB_PLL_MODE] = {
+ {13500000, 13513500, HDMI_SRZ_PLL_CFG_MODE_13_5_MHZ},
+ {25174800, 25200000, HDMI_SRZ_PLL_CFG_MODE_25_2_MHZ},
+ {27000000, 27027000, HDMI_SRZ_PLL_CFG_MODE_27_MHZ},
+ {54000000, 54054000, HDMI_SRZ_PLL_CFG_MODE_54_MHZ},
+ {72000000, 74250000, HDMI_SRZ_PLL_CFG_MODE_74_25_MHZ},
+ {108000000, 108108000, HDMI_SRZ_PLL_CFG_MODE_108_MHZ},
+ {148351648, 297000000, HDMI_SRZ_PLL_CFG_MODE_148_5_MHZ}
+};
+
+#define NB_HDMI_PHY_CONFIG 5
+static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = {
+ {0, 40000000, {0x00101010, 0x00101010, 0x00101010, 0x02} },
+ {40000000, 140000000, {0x00111111, 0x00111111, 0x00111111, 0x02} },
+ {140000000, 160000000, {0x00131313, 0x00101010, 0x00101010, 0x02} },
+ {160000000, 250000000, {0x00131313, 0x00111111, 0x00111111, 0x03FE} },
+ {250000000, 300000000, {0x00151515, 0x00101010, 0x00101010, 0x03FE} },
+};
+
+#define PLL_CHANGE_DELAY 1 /* ms */
+
+/**
+ * Disable the pll rejection
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * return true if the pll has been disabled
+ */
+static bool disable_pll_rejection(struct sti_hdmi *hdmi)
+{
+ u32 val;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+ val &= ~REJECTION_PLL_HDMI_ENABLE_MASK;
+ writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+
+ msleep(PLL_CHANGE_DELAY);
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
+
+ return !(val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
+}
+
+/**
+ * Enable the old BCH/rejection PLL is now reused to provide the CLKPXPLL
+ * clock input to the new PHY PLL that generates the serializer clock
+ * (TMDS*10) and the TMDS clock which is now fed back into the HDMI
+ * formatter instead of the TMDS clock line from ClockGenB.
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * return true if pll has been correctly set
+ */
+static bool enable_pll_rejection(struct sti_hdmi *hdmi)
+{
+ unsigned int inputclock;
+ u32 mdiv, ndiv, pdiv, val;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ if (!disable_pll_rejection(hdmi))
+ return false;
+
+ inputclock = hdmi->mode.clock * 1000;
+
+ DRM_DEBUG_DRIVER("hdmi rejection pll input clock = %dHz\n", inputclock);
+
+
+ /* Power up the HDMI rejection PLL
+ * Note: On this SoC (stiH416) we are forced to have the input clock
+ * be equal to the HDMI pixel clock.
+ *
+ * The values here have been suggested by validation however they are
+ * still provisional and subject to change.
+ *
+ * PLLout = (Fin*Mdiv) / ((2 * Ndiv) / 2^Pdiv)
+ */
+ if (inputclock < 50000000) {
+ /*
+ * For slower clocks we need to multiply more to keep the
+ * internal VCO frequency within the physical specification
+ * of the PLL.
+ */
+ pdiv = 4;
+ ndiv = 240;
+ mdiv = 30;
+ } else {
+ pdiv = 2;
+ ndiv = 60;
+ mdiv = 30;
+ }
+
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+
+ val &= ~(REJECTION_PLL_HDMI_PDIV_MASK |
+ REJECTION_PLL_HDMI_NDIV_MASK |
+ REJECTION_PLL_HDMI_MDIV_MASK |
+ REJECTION_PLL_HDMI_ENABLE_MASK);
+
+ val |= (pdiv << REJECTION_PLL_HDMI_PDIV_SHIFT) |
+ (ndiv << REJECTION_PLL_HDMI_NDIV_SHIFT) |
+ (mdiv << REJECTION_PLL_HDMI_MDIV_SHIFT) |
+ (0x1 << REJECTION_PLL_HDMI_ENABLE_SHIFT);
+
+ writel(val, hdmi->syscfg + HDMI_REJECTION_PLL_CONFIGURATION);
+
+ msleep(PLL_CHANGE_DELAY);
+ val = readl(hdmi->syscfg + HDMI_REJECTION_PLL_STATUS);
+
+ return (val & REJECTION_PLL_HDMI_REJ_PLL_LOCK);
+}
+
+/**
+ * Start hdmi phy macro cell tx3g0c55
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * Return false if an error occur
+ */
+static bool sti_hdmi_tx3g0c55phy_start(struct sti_hdmi *hdmi)
+{
+ u32 ckpxpll = hdmi->mode.clock * 1000;
+ u32 val, tmdsck, freqvco, pllctrl = 0;
+ unsigned int i;
+
+ if (!enable_pll_rejection(hdmi))
+ return false;
+
+ DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll);
+
+ /* Assuming no pixel repetition and 24bits color */
+ tmdsck = ckpxpll;
+ pllctrl = 2 << HDMI_SRZ_PLL_CFG_NDIV_SHIFT;
+
+ /*
+ * Setup the PLL mode parameter based on the ckpxpll. If we haven't got
+ * a clock frequency supported by one of the specific PLL modes then we
+ * will end up using the generic mode (0) which only supports a 10x
+ * multiplier, hence only 24bit color.
+ */
+ for (i = 0; i < NB_PLL_MODE; i++) {
+ if (ckpxpll >= pllmodes[i].min && ckpxpll <= pllmodes[i].max)
+ pllctrl |= HDMI_SRZ_PLL_CFG_MODE(pllmodes[i].mode);
+ }
+
+ freqvco = tmdsck * 10;
+ if (freqvco <= 425000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_425MHZ);
+ else if (freqvco <= 850000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_850MHZ);
+ else if (freqvco <= 1700000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_1700MHZ);
+ else if (freqvco <= 2970000000UL)
+ pllctrl |= HDMI_SRZ_PLL_CFG_VCOR(HDMI_SRZ_PLL_CFG_VCOR_3000MHZ);
+ else {
+ DRM_ERROR("PHY serializer clock out of range\n");
+ goto err;
+ }
+
+ /*
+ * Configure and power up the PHY PLL
+ */
+ hdmi->event_received = false;
+ DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl);
+ hdmi_write(hdmi, pllctrl, HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) {
+ DRM_ERROR("hdmi phy pll not locked\n");
+ goto err;
+ }
+
+ DRM_DEBUG_DRIVER("got PHY PLL Lock\n");
+
+ /*
+ * To configure the source termination and pre-emphasis appropriately
+ * for different high speed TMDS clock frequencies a phy configuration
+ * table must be provided, tailored to the SoC and board combination.
+ */
+ for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) {
+ if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) &&
+ (hdmiphy_config[i].max_tmds_freq >= tmdsck)) {
+ val = hdmiphy_config[i].config[0];
+ hdmi_write(hdmi, val, HDMI_SRZ_TAP_1);
+ val = hdmiphy_config[i].config[1];
+ hdmi_write(hdmi, val, HDMI_SRZ_TAP_2);
+ val = hdmiphy_config[i].config[2];
+ hdmi_write(hdmi, val, HDMI_SRZ_TAP_3);
+ val = hdmiphy_config[i].config[3];
+ val |= HDMI_SRZ_CTRL_EXTERNAL_DATA_EN;
+ val &= ~HDMI_SRZ_CTRL_POWER_DOWN;
+ hdmi_write(hdmi, val, HDMI_SRZ_CTRL);
+
+ DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x 0x%x\n",
+ hdmiphy_config[i].config[0],
+ hdmiphy_config[i].config[1],
+ hdmiphy_config[i].config[2],
+ hdmiphy_config[i].config[3]);
+ return true;
+ }
+ }
+
+ /*
+ * Default, power up the serializer with no pre-emphasis or source
+ * termination.
+ */
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_1);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_2);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_TAP_3);
+ hdmi_write(hdmi, HDMI_SRZ_CTRL_EXTERNAL_DATA_EN, HDMI_SRZ_CTRL);
+
+ return true;
+
+err:
+ disable_pll_rejection(hdmi);
+
+ return false;
+}
+
+/**
+ * Stop hdmi phy macro cell tx3g0c55
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void sti_hdmi_tx3g0c55phy_stop(struct sti_hdmi *hdmi)
+{
+ DRM_DEBUG_DRIVER("\n");
+
+ hdmi->event_received = false;
+
+ hdmi_write(hdmi, HDMI_SRZ_CTRL_POWER_DOWN, HDMI_SRZ_CTRL);
+ hdmi_write(hdmi, HDMI_SRZ_PLL_CFG_POWER_DOWN, HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK)
+ DRM_ERROR("hdmi phy pll not well disabled\n");
+
+ disable_pll_rejection(hdmi);
+}
+
+struct hdmi_phy_ops tx3g0c55phy_ops = {
+ .start = sti_hdmi_tx3g0c55phy_start,
+ .stop = sti_hdmi_tx3g0c55phy_stop,
+};
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
new file mode 100644
index 0000000..068237b
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g0c55phy.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard at st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_HDMI_TX3G0C55PHY_H_
+#define _STI_HDMI_TX3G0C55PHY_H_
+
+#include "sti_hdmi.h"
+
+extern struct hdmi_phy_ops tx3g0c55phy_ops;
+
+#endif
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
new file mode 100644
index 0000000..8e0ceb0
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Vincent Abriou <vincent.abriou at st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include "sti_hdmi_tx3g4c28phy.h"
+
+#define HDMI_SRZ_CFG 0x504
+#define HDMI_SRZ_PLL_CFG 0x510
+#define HDMI_SRZ_ICNTL 0x518
+#define HDMI_SRZ_CALCODE_EXT 0x520
+
+#define HDMI_SRZ_CFG_EN BIT(0)
+#define HDMI_SRZ_CFG_DISABLE_BYPASS_SINK_CURRENT BIT(1)
+#define HDMI_SRZ_CFG_EXTERNAL_DATA BIT(16)
+#define HDMI_SRZ_CFG_RBIAS_EXT BIT(17)
+#define HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION BIT(18)
+#define HDMI_SRZ_CFG_EN_BIASRES_DETECTION BIT(19)
+#define HDMI_SRZ_CFG_EN_SRC_TERMINATION BIT(24)
+
+#define HDMI_SRZ_CFG_INTERNAL_MASK (HDMI_SRZ_CFG_EN | \
+ HDMI_SRZ_CFG_DISABLE_BYPASS_SINK_CURRENT | \
+ HDMI_SRZ_CFG_EXTERNAL_DATA | \
+ HDMI_SRZ_CFG_RBIAS_EXT | \
+ HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION | \
+ HDMI_SRZ_CFG_EN_BIASRES_DETECTION | \
+ HDMI_SRZ_CFG_EN_SRC_TERMINATION)
+
+#define PLL_CFG_EN BIT(0)
+#define PLL_CFG_NDIV_SHIFT (8)
+#define PLL_CFG_IDF_SHIFT (16)
+#define PLL_CFG_ODF_SHIFT (24)
+
+#define ODF_DIV_1 (0)
+#define ODF_DIV_2 (1)
+#define ODF_DIV_4 (2)
+#define ODF_DIV_8 (3)
+
+#define HDMI_TIMEOUT_PLL_LOCK 50 /*milliseconds */
+
+struct plldividers_s {
+ uint32_t min;
+ uint32_t max;
+ uint32_t idf;
+ uint32_t odf;
+};
+
+/*
+ * Functional specification recommended values
+ */
+#define NB_PLL_MODE 5
+static struct plldividers_s plldividers[NB_PLL_MODE] = {
+ {0, 20000000, 1, ODF_DIV_8},
+ {20000000, 42500000, 2, ODF_DIV_8},
+ {42500000, 85000000, 4, ODF_DIV_4},
+ {85000000, 170000000, 8, ODF_DIV_2},
+ {170000000, 340000000, 16, ODF_DIV_1}
+};
+
+#define NB_HDMI_PHY_CONFIG 2
+static struct hdmi_phy_config hdmiphy_config[NB_HDMI_PHY_CONFIG] = {
+ {0, 250000000, {0x0, 0x0, 0x0, 0x0} },
+ {250000000, 300000000, {0x1110, 0x0, 0x0, 0x0} },
+};
+
+/**
+ * Start hdmi phy macro cell tx3g4c28
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ *
+ * Return false if an error occur
+ */
+static bool sti_hdmi_tx3g4c28phy_start(struct sti_hdmi *hdmi)
+{
+ u32 ckpxpll = hdmi->mode.clock * 1000;
+ u32 val, tmdsck, idf, odf, pllctrl = 0;
+ bool foundplldivides = false;
+ int i;
+
+ DRM_DEBUG_DRIVER("ckpxpll = %dHz\n", ckpxpll);
+
+ for (i = 0; i < NB_PLL_MODE; i++) {
+ if (ckpxpll >= plldividers[i].min &&
+ ckpxpll < plldividers[i].max) {
+ idf = plldividers[i].idf;
+ odf = plldividers[i].odf;
+ foundplldivides = true;
+ break;
+ }
+ }
+
+ if (!foundplldivides) {
+ DRM_ERROR("input TMDS clock speed (%d) not supported\n",
+ ckpxpll);
+ goto err;
+ }
+
+ /* Assuming no pixel repetition and 24bits color */
+ tmdsck = ckpxpll;
+ pllctrl |= 40 << PLL_CFG_NDIV_SHIFT;
+
+ if (tmdsck > 340000000) {
+ DRM_ERROR("output TMDS clock (%d) out of range\n", tmdsck);
+ goto err;
+ }
+
+ pllctrl |= idf << PLL_CFG_IDF_SHIFT;
+ pllctrl |= odf << PLL_CFG_ODF_SHIFT;
+
+ /*
+ * Configure and power up the PHY PLL
+ */
+ hdmi->event_received = false;
+ DRM_DEBUG_DRIVER("pllctrl = 0x%x\n", pllctrl);
+ hdmi_write(hdmi, (pllctrl | PLL_CFG_EN), HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if ((hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK) == 0) {
+ DRM_ERROR("hdmi phy pll not locked\n");
+ goto err;
+ }
+
+ DRM_DEBUG_DRIVER("got PHY PLL Lock\n");
+
+ val = (HDMI_SRZ_CFG_EN |
+ HDMI_SRZ_CFG_EXTERNAL_DATA |
+ HDMI_SRZ_CFG_EN_BIASRES_DETECTION |
+ HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION);
+
+ if (tmdsck > 165000000)
+ val |= HDMI_SRZ_CFG_EN_SRC_TERMINATION;
+
+ /*
+ * To configure the source termination and pre-emphasis appropriately
+ * for different high speed TMDS clock frequencies a phy configuration
+ * table must be provided, tailored to the SoC and board combination.
+ */
+ for (i = 0; i < NB_HDMI_PHY_CONFIG; i++) {
+ if ((hdmiphy_config[i].min_tmds_freq <= tmdsck) &&
+ (hdmiphy_config[i].max_tmds_freq >= tmdsck)) {
+ val |= (hdmiphy_config[i].config[0]
+ & ~HDMI_SRZ_CFG_INTERNAL_MASK);
+ hdmi_write(hdmi, val, HDMI_SRZ_CFG);
+
+ val = hdmiphy_config[i].config[1];
+ hdmi_write(hdmi, val, HDMI_SRZ_ICNTL);
+
+ val = hdmiphy_config[i].config[2];
+ hdmi_write(hdmi, val, HDMI_SRZ_CALCODE_EXT);
+
+ DRM_DEBUG_DRIVER("serializer cfg 0x%x 0x%x 0x%x\n",
+ hdmiphy_config[i].config[0],
+ hdmiphy_config[i].config[1],
+ hdmiphy_config[i].config[2]);
+ return true;
+ }
+ }
+
+ /*
+ * Default, power up the serializer with no pre-emphasis or
+ * output swing correction
+ */
+ hdmi_write(hdmi, val, HDMI_SRZ_CFG);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_ICNTL);
+ hdmi_write(hdmi, 0x0, HDMI_SRZ_CALCODE_EXT);
+
+ return true;
+
+err:
+ return false;
+}
+
+/**
+ * Stop hdmi phy macro cell tx3g4c28
+ *
+ * @hdmi: pointer on the hdmi internal structure
+ */
+static void sti_hdmi_tx3g4c28phy_stop(struct sti_hdmi *hdmi)
+{
+ int val = 0;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ hdmi->event_received = false;
+
+ val = HDMI_SRZ_CFG_EN_SINK_TERM_DETECTION;
+ val |= HDMI_SRZ_CFG_EN_BIASRES_DETECTION;
+
+ hdmi_write(hdmi, val, HDMI_SRZ_CFG);
+ hdmi_write(hdmi, 0, HDMI_SRZ_PLL_CFG);
+
+ /* wait PLL interrupt */
+ wait_event_interruptible_timeout(hdmi->wait_event,
+ hdmi->event_received == true,
+ msecs_to_jiffies
+ (HDMI_TIMEOUT_PLL_LOCK));
+
+ if (hdmi_read(hdmi, HDMI_STA) & HDMI_STA_DLL_LCK)
+ DRM_ERROR("hdmi phy pll not well disabled\n");
+}
+
+struct hdmi_phy_ops tx3g4c28phy_ops = {
+ .start = sti_hdmi_tx3g4c28phy_start,
+ .stop = sti_hdmi_tx3g4c28phy_stop,
+};
diff --git a/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
new file mode 100644
index 0000000..f99a7ff
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Benjamin Gaignard <benjamin.gaignard at st.com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_HDMI_TX3G4C28PHY_H_
+#define _STI_HDMI_TX3G4C28PHY_H_
+
+#include "sti_hdmi.h"
+
+extern struct hdmi_phy_ops tx3g4c28phy_ops;
+
+#endif
--
1.9.1
More information about the dri-devel
mailing list