[PATCH] imx-drm: imx-hdmi: fix hdmi hotplug detection initial state

[Russell King - ARM Linux]

On Tue, Jun 10, 2014 at 05:14:21PM +0100, Russell King - ARM Linux wrote:
> On Tue, Jun 10, 2014 at 04:13:06PM +0100, Russell King - ARM Linux wrote:
> > where 'M' is the IPU DI clock muxer.  However, we're currently setting
> > this up as:
> > 
> > LM --+---------------- LDB serial
> >       `- /7 -+-------- LDB DI clock
> > IPM --- /N ---- IM --- IPU DI clock
> > 
> > and hoping that the LDB and IPU DI clocks are appropriately synchronised.
> 
> I've just found that we do indeed do this - but there's nothing to
> switch the configuration back when the LDB is no longer using a
> particular DI.
> 
> Also, I'm having a hard time working out why we have the LDB being
> given all sorts of clocks...
> 
> LM --+----------------- LDB serial	(clks 33, aka di0_pll)
>       `- /7 -+--------- LDB DI clock	(clks 135, aka di0)
>               `- IM --- IPU DI clock	(clks 39, aka di0_sel)
> 
> The LDB is given all of these to play with, including reprogramming
> the IM, and there's nothing which ever programs IM to anything but
> the LDB DI clock once it's set there.

*Sigh*... is the clock tree represented in Linux even correct?

--|\
--| |
--| |------------------+-----------------------------------------
--| |  ^ ldb_di0_sel   |
--|/     (clks 33)     |
                       `-- /3.5 ---- /2 ------------------ G -+--
                                  ^       ^ ldb_di0_podf      | ^ ldb_di0
                      ldb_di0_div_3_5                         |
                                       .----------------------'
                                       |
                                       '------|\
                         (ldb_di1)------------| |
                         (ipp_di0)------------| |--------- G ----
                         (ipp_di1)------------| | ^             ^ ipu1_di0
                    (ipu1_di0_pre)------------|/ ipu1_di0_sel

This diagram is drawn from the code in clk-imx6.c, and it does not
agree with what is in the SoC manuals - this is the representation
redrawn from the manuals:

--|\
--| |
--| |------------------+---------------------------------- G ----
--| |  ^ ldb_di0_sel   |                                        ^ ldb serial
--|/     (clks 33)     |
                       `-- /3.5 ---- /2 -----------------+-------
                                  ^       ^ ldb_di0_podf |      ^ ldb di
                      ldb_di0_div_3_5                    |
                                       .-----------------'
                                       |
                                       '------|\
                         (ldb_di1)------------| |
                         (ipp_di0)------------| |--------- G ----
                         (ipp_di1)------------| | ^             ^ ipu1_di0
                    (ipu1_di0_pre)------------|/ ipu1_di0_sel


The difference is, there is no clock gate between the LDB DI clock and
the /7 divider, but there is a clock gate on the LDB serial clock.

In another location, the iMX6QDL manual suggests that it may be more
like this:

--|\
--| |
--| |----------- cg ---+-----------------------------------------
--| |  ^ ldb_di0_sel   |                                        ^ ldb serial
--|/     (clks 33)     |
                       `-- /3.5 ---- /2 -----------------+-------
                                  ^       ^ ldb_di0_podf |      ^ ldb di
                      ldb_di0_div_3_5                    |
                                       .-----------------'
                                       |
                                       '------|\
                         (ldb_di1)------------| |
                         (ipp_di0)------------| |----------------
                         (ipp_di1)------------| | ^             ^ ipu1_di0
                    (ipu1_di0_pre)-- cg ------|/ ipu1_di0_sel

although "cg" is not defined what it is.  Another place seems to
confirm the above diagram, saying that the "ldb_di0_clk_enable"
gating bits controls both "ch_0_serial_clk" (presumably the
ldb serial clock) and "di_0_clk_nc" (presumably the ldb di clock.
If that's correct "cg" refers to the clock gating via the CCM_CCGR
registers, which appear in the CCM clock tree diagram under LPCG.

So... I wonder which one of these three is actually the right one...

-- 
FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly
improving, and getting towards what was expected from it.