[PATCH v4 06/11] drm: sti: add TVOut driver
Rob Clark
robdclark at gmail.com
Wed Jun 11 11:20:38 PDT 2014
On Thu, May 29, 2014 at 2:37 AM, Benjamin Gaignard
<benjamin.gaignard at linaro.org> wrote:
> TVout hardware block is responsible to dispatch the data flow coming
> from compositor block to any of the output (HDMI or Analog TV).
> It control when output are start/stop and configure according the
> require flow path.
>
> TVout is the parent of HDMI and HDA drivers and bind them at runtime.
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at linaro.org>
> ---
> drivers/gpu/drm/sti/Makefile | 3 +-
> drivers/gpu/drm/sti/sti_tvout.c | 678 ++++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/sti/sti_tvout.h | 18 ++
> 3 files changed, 698 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/sti/sti_tvout.c
> create mode 100644 drivers/gpu/drm/sti/sti_tvout.h
>
> diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
> index df47171..dcc9568 100644
> --- a/drivers/gpu/drm/sti/Makefile
> +++ b/drivers/gpu/drm/sti/Makefile
> @@ -4,4 +4,5 @@ obj-$(CONFIG_DRM_STI) += \
> sti_hdmi.o \
> sti_hdmi_tx3g0c55phy.o \
> sti_hdmi_tx3g4c28phy.o \
> - sti_hda.o
> + sti_hda.o \
> + sti_tvout.o
> \ No newline at end of file
> diff --git a/drivers/gpu/drm/sti/sti_tvout.c b/drivers/gpu/drm/sti/sti_tvout.c
> new file mode 100644
> index 0000000..d778e35
> --- /dev/null
> +++ b/drivers/gpu/drm/sti/sti_tvout.c
> @@ -0,0 +1,678 @@
> +/*
> + * Copyright (C) STMicroelectronics SA 2014
> + * Authors: Benjamin Gaignard <benjamin.gaignard at st.com>
> + * Vincent Abriou <vincent.abriou at st.com>
> + * for STMicroelectronics.
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_crtc_helper.h>
> +
> +#include "sti_drm_connector.h"
> +#include "sti_drm_encoder.h"
> +#include "sti_tvout.h"
> +
> +/* glue registers */
> +#define TVO_CSC_MAIN_M0 0x000
> +#define TVO_CSC_MAIN_M1 0x004
> +#define TVO_CSC_MAIN_M2 0x008
> +#define TVO_CSC_MAIN_M3 0x00c
> +#define TVO_CSC_MAIN_M4 0x010
> +#define TVO_CSC_MAIN_M5 0x014
> +#define TVO_CSC_MAIN_M6 0x018
> +#define TVO_CSC_MAIN_M7 0x01c
> +#define TVO_MAIN_IN_VID_FORMAT 0x030
> +#define TVO_CSC_AUX_M0 0x100
> +#define TVO_CSC_AUX_M1 0x104
> +#define TVO_CSC_AUX_M2 0x108
> +#define TVO_CSC_AUX_M3 0x10c
> +#define TVO_CSC_AUX_M4 0x110
> +#define TVO_CSC_AUX_M5 0x114
> +#define TVO_CSC_AUX_M6 0x118
> +#define TVO_CSC_AUX_M7 0x11c
> +#define TVO_AUX_IN_VID_FORMAT 0x130
> +#define TVO_VIP_HDF 0x400
> +#define TVO_HD_SYNC_SEL 0x418
> +#define TVO_HD_DAC_CFG_OFF 0x420
> +#define TVO_VIP_HDMI 0x500
> +#define TVO_HDMI_FORCE_COLOR_0 0x504
> +#define TVO_HDMI_FORCE_COLOR_1 0x508
> +#define TVO_HDMI_CLIP_VALUE_B_CB 0x50c
> +#define TVO_HDMI_CLIP_VALUE_Y_G 0x510
> +#define TVO_HDMI_CLIP_VALUE_R_CR 0x514
> +#define TVO_HDMI_SYNC_SEL 0x518
> +#define TVO_HDMI_DFV_OBS 0x540
> +
> +#define TVO_IN_FMT_SIGNED BIT(0)
> +#define TVO_SYNC_EXT BIT(4)
> +
> +#define TVO_VIP_REORDER_R_SHIFT 24
> +#define TVO_VIP_REORDER_G_SHIFT 20
> +#define TVO_VIP_REORDER_B_SHIFT 16
> +#define TVO_VIP_REORDER_MASK 0x3
> +#define TVO_VIP_REORDER_Y_G_SEL 0
> +#define TVO_VIP_REORDER_CB_B_SEL 1
> +#define TVO_VIP_REORDER_CR_R_SEL 2
> +
> +#define TVO_VIP_CLIP_SHIFT 8
> +#define TVO_VIP_CLIP_MASK 0x7
> +#define TVO_VIP_CLIP_DISABLED 0
> +#define TVO_VIP_CLIP_EAV_SAV 1
> +#define TVO_VIP_CLIP_LIMITED_RANGE_RGB_Y 2
> +#define TVO_VIP_CLIP_LIMITED_RANGE_CB_CR 3
> +#define TVO_VIP_CLIP_PROG_RANGE 4
> +
> +#define TVO_VIP_RND_SHIFT 4
> +#define TVO_VIP_RND_MASK 0x3
> +#define TVO_VIP_RND_8BIT_ROUNDED 0
> +#define TVO_VIP_RND_10BIT_ROUNDED 1
> +#define TVO_VIP_RND_12BIT_ROUNDED 2
> +
> +#define TVO_VIP_SEL_INPUT_MASK 0xf
> +#define TVO_VIP_SEL_INPUT_MAIN 0x0
> +#define TVO_VIP_SEL_INPUT_AUX 0x8
> +#define TVO_VIP_SEL_INPUT_FORCE_COLOR 0xf
> +#define TVO_VIP_SEL_INPUT_BYPASS_MASK 0x1
> +#define TVO_VIP_SEL_INPUT_BYPASSED 1
> +
> +#define TVO_SYNC_MAIN_VTG_SET_REF 0x00
> +#define TVO_SYNC_MAIN_VTG_SET_1 0x01
> +#define TVO_SYNC_MAIN_VTG_SET_2 0x02
> +#define TVO_SYNC_MAIN_VTG_SET_3 0x03
> +#define TVO_SYNC_MAIN_VTG_SET_4 0x04
> +#define TVO_SYNC_MAIN_VTG_SET_5 0x05
> +#define TVO_SYNC_MAIN_VTG_SET_6 0x06
> +#define TVO_SYNC_AUX_VTG_SET_REF 0x10
> +#define TVO_SYNC_AUX_VTG_SET_1 0x11
> +#define TVO_SYNC_AUX_VTG_SET_2 0x12
> +#define TVO_SYNC_AUX_VTG_SET_3 0x13
> +#define TVO_SYNC_AUX_VTG_SET_4 0x14
> +#define TVO_SYNC_AUX_VTG_SET_5 0x15
> +#define TVO_SYNC_AUX_VTG_SET_6 0x16
> +
> +#define TVO_SYNC_HD_DCS_SHIFT 8
> +
> +/* enum listing the supported output data format */
> +enum sti_tvout_video_out_type {
> + STI_TVOUT_VIDEO_OUT_RGB,
> + STI_TVOUT_VIDEO_OUT_YUV,
> +};
> +
> +/**
> + * STI TVout structure
> + *
> + * @dev: pointer to driver device
> + * @regs: registers
> + * @reset: reset control of the tvout
> + */
> +struct sti_tvout {
> + struct device *dev;
> + void __iomem *regs;
> + struct reset_control *reset;
> +};
> +
> +/* preformatter conversion matrix */
> +static const u32 rgb_to_ycbcr_601[8] = {
> + 0xF927082E, 0x04C9FEAB, 0x01D30964, 0xFA95FD3D,
> + 0x0000082E, 0x00002000, 0x00002000, 0x00000000
> +};
> +
> +/* 709 RGB to YCbCr */
> +static const u32 rgb_to_ycbcr_709[8] = {
> + 0xF891082F, 0x0367FF40, 0x01280B71, 0xF9B1FE20,
> + 0x0000082F, 0x00002000, 0x00002000, 0x00000000
> +};
> +
> +static u32 tvout_read(struct sti_tvout *tvout, int offset)
> +{
> + return readl(tvout->regs + offset);
> +}
> +
> +static void tvout_write(struct sti_tvout *tvout, u32 val, int offset)
> +{
> + writel(val, tvout->regs + offset);
> +}
> +
> +/**
> + * Set the clipping mode of a VIP
> + *
> + * @tvout: tvout structure
> + * @cr_r:
> + * @y_g:
> + * @cb_b:
> + */
> +static void tvout_vip_set_color_order(struct sti_tvout *tvout,
> + u32 cr_r, u32 y_g, u32 cb_b)
> +{
> + u32 val = tvout_read(tvout, TVO_VIP_HDMI);
> +
> + val &= ~(TVO_VIP_REORDER_MASK << TVO_VIP_REORDER_R_SHIFT);
> + val &= ~(TVO_VIP_REORDER_MASK << TVO_VIP_REORDER_G_SHIFT);
> + val &= ~(TVO_VIP_REORDER_MASK << TVO_VIP_REORDER_B_SHIFT);
> + val |= cr_r << TVO_VIP_REORDER_R_SHIFT;
> + val |= y_g << TVO_VIP_REORDER_G_SHIFT;
> + val |= cb_b << TVO_VIP_REORDER_B_SHIFT;
> +
> + tvout_write(tvout, val, TVO_VIP_HDMI);
> +}
> +
> +/**
> + * Set the clipping mode of a VIP
> + *
> + * @tvout: tvout structure
> + * @range: clipping range
> + */
> +static void tvout_vip_set_clip_mode(struct sti_tvout *tvout, u32 range)
> +{
> + u32 val = tvout_read(tvout, TVO_VIP_HDMI);
> +
> + val &= ~(TVO_VIP_CLIP_MASK << TVO_VIP_CLIP_SHIFT);
> + val |= range << TVO_VIP_CLIP_SHIFT;
> + tvout_write(tvout, val, TVO_VIP_HDMI);
> +}
> +
> +/**
> + * Set the rounded value of a VIP
> + *
> + * @tvout: tvout structure
> + * @rnd: rounded val per component
> + */
> +static void tvout_vip_set_rnd(struct sti_tvout *tvout, u32 rnd)
> +{
> + u32 val = tvout_read(tvout, TVO_VIP_HDMI);
> +
> + val &= ~(TVO_VIP_RND_MASK << TVO_VIP_RND_SHIFT);
> + val |= rnd << TVO_VIP_RND_SHIFT;
> + tvout_write(tvout, val, TVO_VIP_HDMI);
> +}
> +
> +/**
> + * Select the VIP input
> + *
> + * @tvout: tvout structure
> + * @sel_input: selected_input (main/aux + conv)
> + */
> +static void tvout_vip_set_sel_input(struct sti_tvout *tvout,
> + bool main_path,
> + bool sel_input_logic_inverted,
> + enum sti_tvout_video_out_type video_out)
> +{
> + u32 sel_input;
> + u32 val = tvout_read(tvout, TVO_VIP_HDMI);
> +
> + if (main_path)
> + sel_input = TVO_VIP_SEL_INPUT_MAIN;
> + else
> + sel_input = TVO_VIP_SEL_INPUT_AUX;
> +
> + switch (video_out) {
> + case STI_TVOUT_VIDEO_OUT_RGB:
> + sel_input |= TVO_VIP_SEL_INPUT_BYPASSED;
> + break;
> + case STI_TVOUT_VIDEO_OUT_YUV:
> + sel_input &= ~TVO_VIP_SEL_INPUT_BYPASSED;
> + break;
> + }
> +
> + /* on stih407 chip the sel_input bypass mode logic is inverted */
> + if (sel_input_logic_inverted)
> + sel_input = sel_input ^ TVO_VIP_SEL_INPUT_BYPASS_MASK;
> +
> + val &= ~TVO_VIP_SEL_INPUT_MASK;
> + val |= sel_input;
> + tvout_write(tvout, val, TVO_VIP_HDMI);
> +}
> +
> +/**
> + * Select the input video signed or unsigned
> + *
> + * @tvout: tvout structure
> + * @in_vid_signed: used video input format
> + */
> +static void tvout_vip_set_in_vid_fmt(struct sti_tvout *tvout, u32 in_vid_fmt)
> +{
> + u32 val = tvout_read(tvout, TVO_VIP_HDMI);
> +
> + val &= ~TVO_IN_FMT_SIGNED;
> + val |= in_vid_fmt;
> + tvout_write(tvout, val, TVO_MAIN_IN_VID_FORMAT);
> +}
> +
> +/**
> + * Start VIP block for HDMI output
> + *
> + * @tvout: pointer on tvout structure
> + * @main_path: true if main path has to be used in the vip configuration
> + * else aux path is used.
> + */
> +static void tvout_hdmi_start(struct sti_tvout *tvout, bool main_path)
> +{
> + struct device_node *node = tvout->dev->of_node;
> + bool sel_input_logic_inverted = false;
> +
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + if (main_path) {
> + DRM_DEBUG_DRIVER("main vip for hdmi\n");
> + /* select the input sync for hdmi = VTG set 1 */
> + writel(TVO_SYNC_MAIN_VTG_SET_1,
> + tvout->regs + TVO_HDMI_SYNC_SEL);
btw, I notice a few places that bypass tvout_write()/tvout_readl()..
but if there is a reason, it at least doesn't seem obvious..
> + } else {
> + DRM_DEBUG_DRIVER("aux vip for hdmi\n");
> + /* select the input sync for hdmi = VTG set 1 */
> + writel(TVO_SYNC_AUX_VTG_SET_1, tvout->regs + TVO_HDMI_SYNC_SEL);
> + }
> +
> + /* set color channel order */
> + tvout_vip_set_color_order(tvout,
> + TVO_VIP_REORDER_CR_R_SEL,
> + TVO_VIP_REORDER_Y_G_SEL,
> + TVO_VIP_REORDER_CB_B_SEL);
> +
> + /* set clipping mode (Limited range RGB/Y) */
> + tvout_vip_set_clip_mode(tvout, TVO_VIP_CLIP_LIMITED_RANGE_RGB_Y);
> +
> + /* set round mode (rounded to 8-bit per component) */
> + tvout_vip_set_rnd(tvout, TVO_VIP_RND_8BIT_ROUNDED);
> +
> + if (of_device_is_compatible(node, "st,stih407-tvout")) {
> + /* set input video format */
> + tvout_vip_set_in_vid_fmt(tvout->regs + TVO_MAIN_IN_VID_FORMAT,
> + TVO_IN_FMT_SIGNED);
> + sel_input_logic_inverted = true;
> + }
> +
> + /* input selection */
> + tvout_vip_set_sel_input(tvout, main_path,
> + sel_input_logic_inverted, STI_TVOUT_VIDEO_OUT_RGB);
> +}
> +
> +/**
> + * Prepare/configure VIP block for HDMI output
> + *
> + * @tvout: pointer on tvout structure
> + */
> +static void tvout_hdmi_prepare(struct sti_tvout *tvout)
> +{
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + /* reset VIP register */
> + writel(0x00000000, tvout->regs + TVO_VIP_HDMI);
> +}
> +
> +/**
> + * Disable HDMI VIP
> + *
> + * @tvout: pointer on tvout structure
> + */
> +static void tvout_hdmi_stop(struct sti_tvout *tvout)
> +{
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + /* reset VIP register */
> + writel(0x00000000, tvout->regs + TVO_VIP_HDMI);
> +}
> +
> +/**
> + * Start HDF VIP and HD DAC
> + *
> + * @tvout: pointer on tvout structure
> + * @main_path: true if main path has to be used in the vip configuration
> + * else aux path is used.
> + */
> +static void tvout_hda_start(struct sti_tvout *tvout, bool main_path)
> +{
> + struct device_node *node = tvout->dev->of_node;
> + bool sel_input_logic_inverted = false;
> +
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + if (!main_path) {
> + DRM_ERROR("HD Analog on aux not implemented\n");
> + return;
> + }
> +
> + DRM_DEBUG_DRIVER("main vip for HDF\n");
> +
> + /* set color channel order */
> + tvout_vip_set_color_order(tvout->regs + TVO_VIP_HDF,
> + TVO_VIP_REORDER_CR_R_SEL,
> + TVO_VIP_REORDER_Y_G_SEL,
> + TVO_VIP_REORDER_CB_B_SEL);
> +
> + /* set clipping mode (Limited range RGB/Y) */
> + tvout_vip_set_clip_mode(tvout->regs + TVO_VIP_HDF,
> + TVO_VIP_CLIP_LIMITED_RANGE_CB_CR);
> +
> + /* set round mode (rounded to 10-bit per component) */
> + tvout_vip_set_rnd(tvout->regs + TVO_VIP_HDF, TVO_VIP_RND_10BIT_ROUNDED);
> +
> + if (of_device_is_compatible(node, "st,stih407-tvout")) {
> + /* set input video format */
> + tvout_vip_set_in_vid_fmt(tvout, TVO_IN_FMT_SIGNED);
> + sel_input_logic_inverted = true;
> + }
> +
> + /* Input selection */
> + tvout_vip_set_sel_input(tvout->regs + TVO_VIP_HDF,
> + main_path,
> + sel_input_logic_inverted,
> + STI_TVOUT_VIDEO_OUT_YUV);
> +
> + /* select the input sync for HD analog = VTG set 3
> + * and HD DCS = VTG set 2 */
> + writel((TVO_SYNC_MAIN_VTG_SET_2 << TVO_SYNC_HD_DCS_SHIFT) |
> + TVO_SYNC_MAIN_VTG_SET_3, tvout->regs + TVO_HD_SYNC_SEL);
> +
> + /* power up HD DAC */
> + writel(0, tvout->regs + TVO_HD_DAC_CFG_OFF);
> +}
> +
> +/**
> + * Prepare/configure HDF VIP and HD DAC
> + *
> + * @tvout: pointer on tvout structure
> + */
> +static void tvout_hda_prepare(struct sti_tvout *tvout)
> +{
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + /* reset VIP register */
> + writel(0x00000000, tvout->regs + TVO_VIP_HDF);
> +
> + /* power down HD DAC */
> + writel(1, tvout->regs + TVO_HD_DAC_CFG_OFF);
> +}
> +
> +/**
> + * Stop HDF VIP and HD DAC
> + *
> + * @tvout: pointer on tvout structure
> + */
> +static void tvout_hda_stop(struct sti_tvout *tvout)
> +{
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + /* reset VIP register */
> + writel(0x00000000, tvout->regs + TVO_VIP_HDF);
> +
> + /* power down HD DAC */
> + writel(1, tvout->regs + TVO_HD_DAC_CFG_OFF);
> +}
> +
> +/**
> + * Forward drm display mode information to the connector
> + *
> + * @c: drm_connector
> + * @mode: mode to be set
> + * @main_path: indicated if the connector use the main or auxillary data path
> + *
> + * Return negative value if error occurs
> + */
> +int sti_tvout_set_mode(struct drm_connector *c,
> + struct drm_display_mode *mode, bool main_path)
> +{
> + struct sti_connector *connector = to_sti_connector(c);
> +
> + if (connector)
> + if (connector->set_mode)
> + return connector->set_mode(c, mode, main_path);
hmm, I do wonder a bit whether it would make more sense to split
sti_connector into a bridge + connector, and move stuff like
set_mode() into the bridge half of it? Normally that sort of thing
would make more sense in the encoder, but for msm I actually have
separate hw blocks (ie. encoder is part of display controller block,
but hdmi_bridge or hypothetical dp_bridge/dsi_bridge, are a different
block with (in some cases) their own irq, (in all cases) their own
register space, etc. So the bridge/connector split worked pretty
nicely there. I didn't look closely at why you have things split up
this way, but if the reasons are similar then I'd suggest
sti_bridge/sti_connector..
> +
> + return -EINVAL;
> +}
> +
> +/**
> + * Prepare / initialize depending on the connector type
> + *
> + * @connector: drm_connector
> + *
> + * Return negative value if error occurs
> + */
> +int sti_tvout_prepare(struct drm_connector *c)
> +{
> + struct sti_connector *connector = to_sti_connector(c);
> + struct sti_tvout *tvout = dev_get_drvdata(connector->master);
> + int ret;
> +
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + if (connector)
> + if (connector->prepare)
> + connector->prepare(c);
> +
> + switch (connector->type) {
hmm, ok, so couple issues here..
first, either that 'if (connector)' above is pointless (because you
never expect connector to be NULL) or you're going to crash deref'ing
connector->type.
Also, what is the purpose of this switch, vs just having the connector
specific implementation of connector->prepare() (which maybe should
actually be in sti_bridge) do call right thing?
Same comment for _commit() and _disable() below.
BR,
-R
> + case STI_CONNECTOR_HDMI:
> + tvout_hdmi_prepare(tvout);
> + ret = 0;
> + break;
> + case STI_CONNECTOR_HDA:
> + tvout_hda_prepare(tvout);
> + ret = 0;
> + break;
> + case STI_CONNECTOR_DVO:
> + case STI_CONNECTOR_DENC:
> + default:
> + /* not yet supported */
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * Commit / start depending on the connector type
> + *
> + * @tvout: pointer on tvout structure
> + * @type: type of connector
> + * @main_path: true if main path need to be use (false for aux path)
> + *
> + * Return negative value if error occurs
> + */
> +int sti_tvout_commit(struct drm_connector *c, bool main_path)
> +{
> + struct sti_connector *connector = to_sti_connector(c);
> + struct sti_tvout *tvout = dev_get_drvdata(connector->master);
> + int type = connector->type;
> + u32 matrix_offset;
> + unsigned int i;
> +
> + dev_dbg(tvout->dev, "%s\n", __func__);
> +
> + if (!connector)
> + return -EINVAL;
> +
> + if (connector->start) {
> + if (connector->start(c)) {
> + DRM_ERROR("Unable to properly start connector\n");
> + return -EINVAL;
> + }
> + }
> +
> + /* set preformatter matrix */
> + matrix_offset = main_path ? TVO_CSC_MAIN_M0 : TVO_CSC_AUX_M0;
> + for (i = 0; i < 8; i++)
> + writel(rgb_to_ycbcr_601[i],
> + tvout->regs + matrix_offset + (i * 4));
> +
> + switch (type) {
> + case STI_CONNECTOR_HDMI:
> + tvout_hdmi_start(tvout, main_path);
> + return 0;
> + case STI_CONNECTOR_HDA:
> + tvout_hda_start(tvout, main_path);
> + return 0;
> + case STI_CONNECTOR_DVO:
> + case STI_CONNECTOR_DENC:
> + default:
> + /* not yet supported */
> + return -EINVAL;
> + }
> +}
> +
> +/**
> + * Disable / stop the tvout depending on the connector type
> + *
> + * @tvout: pointer on tvout structure
> + * @type: type of connector
> + */
> +void sti_tvout_disable(struct drm_connector *c)
> +{
> + struct sti_connector *connector = to_sti_connector(c);
> + struct sti_tvout *tvout = dev_get_drvdata(connector->master);
> + int type = connector->type;
> +
> + switch (type) {
> + case STI_CONNECTOR_HDMI:
> + tvout_hdmi_stop(tvout);
> + break;
> + case STI_CONNECTOR_HDA:
> + tvout_hda_stop(tvout);
> + break;
> + case STI_CONNECTOR_DVO:
> + case STI_CONNECTOR_DENC:
> + default:
> + /* not yet supported */
> + return;
> + }
> +
> + if (connector)
> + if (connector->stop)
> + connector->stop(c);
> +}
> +
> +static int sti_tvout_bind(struct device *dev, struct device *master, void *data)
> +{
> + return 0;
> +}
> +
> +static void sti_tvout_unbind(struct device *dev, struct device *master,
> + void *data)
> +{
> + /* do nothing */
> +}
> +
> +static const struct component_ops sti_tvout_ops = {
> + .bind = sti_tvout_bind,
> + .unbind = sti_tvout_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> + struct device_node *np = data;
> +
> + return dev->of_node == np;
> +}
> +
> +static int sti_tvout_add_components(struct device *master, struct master *m)
> +{
> + struct device_node *np = master->of_node;
> + struct device_node *child_np;
> +
> + child_np = of_get_next_available_child(np, NULL);
> +
> + while (child_np) {
> + DRM_INFO("TVout add child %s\n", child_np->name);
> + component_master_add_child(m, compare_of, child_np);
> + of_node_put(child_np);
> + child_np = of_get_next_available_child(np, child_np);
> + }
> +
> + return 0;
> +}
> +
> +static int sti_tvout_master_bind(struct device *dev)
> +{
> + return 0;
> +}
> +
> +static void sti_tvout_master_unbind(struct device *dev)
> +{
> + /* do nothing */
> +}
> +
> +static const struct component_master_ops sti_tvout_master_ops = {
> + .add_components = sti_tvout_add_components,
> + .bind = sti_tvout_master_bind,
> + .unbind = sti_tvout_master_unbind,
> +};
> +
> +static int sti_tvout_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + struct sti_tvout *tvout;
> + struct resource *res;
> +
> + DRM_INFO("%s\n", __func__);
> +
> + if (!node)
> + return -ENODEV;
> +
> + tvout = devm_kzalloc(dev, sizeof(*tvout), GFP_KERNEL);
> + if (!tvout)
> + return -ENOMEM;
> +
> + DRM_INFO("%s tvout %p\n", __func__, tvout);
> +
> + tvout->dev = dev;
> + DRM_INFO("%s tvout->dev %p\n", __func__, tvout->dev);
> +
> + /* get Memory ressources */
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tvout-reg");
> + if (!res) {
> + DRM_ERROR("Invalid glue resource\n");
> + return -ENOMEM;
> + }
> + tvout->regs = devm_ioremap_nocache(dev, res->start, resource_size(res));
> + if (IS_ERR(tvout->regs))
> + return PTR_ERR(tvout->regs);
> +
> + /* get reset resources */
> + tvout->reset = devm_reset_control_get(dev, "tvout");
> + /* take tvout out of reset */
> + if (!IS_ERR(tvout->reset))
> + reset_control_deassert(tvout->reset);
> +
> + platform_set_drvdata(pdev, tvout);
> +
> + of_platform_populate(node, NULL, NULL, dev);
> +
> + component_master_add(&pdev->dev, &sti_tvout_master_ops);
> +
> + return component_add(&pdev->dev, &sti_tvout_ops);
> +}
> +
> +static int sti_tvout_remove(struct platform_device *pdev)
> +{
> + component_master_del(&pdev->dev, &sti_tvout_master_ops);
> + component_del(&pdev->dev, &sti_tvout_ops);
> + return 0;
> +}
> +
> +static struct of_device_id tvout_of_match[] = {
> + { .compatible = "st,stih416-tvout", },
> + { .compatible = "st,stih407-tvout", },
> + { /* end node */ }
> +};
> +MODULE_DEVICE_TABLE(of, tvout_of_match);
> +
> +struct platform_driver sti_tvout_driver = {
> + .driver = {
> + .name = "sti-tvout",
> + .owner = THIS_MODULE,
> + .of_match_table = tvout_of_match,
> + },
> + .probe = sti_tvout_probe,
> + .remove = sti_tvout_remove,
> +};
> +
> +module_platform_driver(sti_tvout_driver);
> diff --git a/drivers/gpu/drm/sti/sti_tvout.h b/drivers/gpu/drm/sti/sti_tvout.h
> new file mode 100644
> index 0000000..81dceff
> --- /dev/null
> +++ b/drivers/gpu/drm/sti/sti_tvout.h
> @@ -0,0 +1,18 @@
> +/*
> + * Copyright (C) STMicroelectronics SA 2014
> + * Author: Vincent Abriou <vincent.abriou at st.com> for STMicroelectronics.
> + * License terms: GNU General Public License (GPL), version 2
> + */
> +
> +#ifndef _STI_TVOUT_H_
> +#define _STI_TVOUT_H_
> +
> +#include <drm/drmP.h>
> +
> +int sti_tvout_set_mode(struct drm_connector *c,
> + struct drm_display_mode *mode, bool main_path);
> +int sti_tvout_prepare(struct drm_connector *c);
> +int sti_tvout_commit(struct drm_connector *c, bool main_path);
> +void sti_tvout_disable(struct drm_connector *c);
> +
> +#endif
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the dri-devel
mailing list