[PATCH v2 1/7] mfd: add atmel-hlcdc driver
Lee Jones
lee.jones at linaro.org
Mon Jun 16 05:50:30 PDT 2014
> The HLCDC IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5
> family or sama5d3 family) exposes 2 subdevices:
> - a display controller (controlled by a DRM driver)
> - a PWM chip
>
> Add support for the MFD device which will just retrieve HLCDC clocks and
> create a regmap so that subdevices can access the HLCDC register range
> concurrently.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon at free-electrons.com>
> ---
> .../devicetree/bindings/mfd/atmel-hlcdc.txt | 41 ++++++++
> drivers/mfd/Kconfig | 11 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/atmel-hlcdc.c | 116 +++++++++++++++++++++
> include/linux/mfd/atmel-hlcdc.h | 78 ++++++++++++++
> 5 files changed, 247 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> create mode 100644 drivers/mfd/atmel-hlcdc.c
> create mode 100644 include/linux/mfd/atmel-hlcdc.h
> diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> new file mode 100644
> index 0000000..f5b69cb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
> @@ -0,0 +1,41 @@
> +Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
> +
> +Required properties:
> + - compatible: value should be one of the following:
> + "atmel,sama5d3-hlcdc"
> + - reg: base address and size of the HLCDC device registers.
> + - clock-names: the name of the 3 clocks requested by the HLCDC device.
> + Should contain "periph_clk", "sys_clk" and "slow_clk".
> + - clocks: should contain the 3 clocks requested by the HLCDC device.
> +
> +The HLCDC IP exposes two subdevices:
> + - a PWM chip: see Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt
> + - a Display Controller: see Documentation/devicetree/bindings/drm/atmel-hlcdc-dc.txt
> +
> +Example:
> +
> + hlcdc: hlcdc at f0030000 {
> + compatible = "atmel,sama5d3-hlcdc";
> + reg = <0xf0030000 0x2000>;
> + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> + clock-names = "periph_clk","sys_clk", "slow_clk";
> + status = "disabled";
Not sure you really want to disable the the node in the example.
> + hlcdc-display-controller {
> + compatible = "atmel,hlcdc-dc";
> + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
I assume you're using the 3rd parameter for flags. If so, please use
the defines.
> + pinctrl-names = "default", "rgb-444", "rgb-565", "rgb-666", "rgb-888";
> + pinctrl-0 = <&pinctrl_lcd_base>;
> + pinctrl-1 = <&pinctrl_lcd_base &pinctrl_lcd_rgb444>;
> + pinctrl-2 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
> + pinctrl-3 = <&pinctrl_lcd_base &pinctrl_lcd_rgb666>;
> + pinctrl-4 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
> + };
> +
> + hlcdc_pwm: hlcdc-pwm {
> + compatible = "atmel,hlcdc-pwm";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcd_pwm>;
> + #pwm-cells = <3>;
> + };
> + };
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index ee8204c..82777f6 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -59,6 +59,17 @@ config MFD_AAT2870_CORE
> additional drivers must be enabled in order to use the
> functionality of the device.
>
> +config MFD_ATMEL_HLCDC
> + tristate "Atmel HLCDC (High LCD Controller)"
What's the difference between a high and a low controller?
> + select MFD_CORE
> + select REGMAP_MMIO
> + help
> + Choose this option if you have an ATMEL SoC with an HLCDC (High
> + LCD Controller) IP (i.e. at91sam9n12, at91sam9x5 family or sama5d3
> + family).
> + This MFD device exposes two subdevices: a PWM chip and a Display
> + Controller.
> +
> config MFD_BCM590XX
> tristate "Broadcom BCM590xx PMUs"
> select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 8afedba..5f25b0d 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -156,6 +156,7 @@ obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o ssbi.o
> obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
> obj-$(CONFIG_MFD_TPS65090) += tps65090.o
> obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
> +obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
> obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
> obj-$(CONFIG_MFD_PALMAS) += palmas.o
> obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
> diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
> new file mode 100644
> index 0000000..e4636e8
> --- /dev/null
> +++ b/drivers/mfd/atmel-hlcdc.c
> @@ -0,0 +1,116 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/mfd/atmel-hlcdc.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
Looks like you're inheriting the clk and regmap header files - don't
do that. Each source file which uses the interfaces should include
them independently.
> +static const struct mfd_cell atmel_hlcdc_cells[] = {
> + {
> + .name = "atmel-hlcdc-pwm",
> + .of_compatible = "atmel,hlcdc-pwm",
> + },
> + {
> + .name = "atmel-hlcdc-dc",
> + .of_compatible = "atmel,hlcdc-dc",
> + },
> +};
> +
> +static int atmel_hlcdc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct regmap_config config;
> + struct atmel_hlcdc *hlcdc;
> + struct resource *res;
> + void __iomem *regs;
> +
> + hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL);
> + if (!hlcdc)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + regs = devm_ioremap_resource(dev, res);
> + if (IS_ERR(regs))
> + return PTR_ERR(regs);
> +
> + hlcdc->periph_clk = devm_clk_get(dev, "periph_clk");
> + if (IS_ERR(hlcdc->periph_clk)) {
> + dev_err(dev, "failed to get functional clock\n");
> + return PTR_ERR(hlcdc->periph_clk);
> + }
> +
> + hlcdc->sys_clk = devm_clk_get(dev, "sys_clk");
> + if (IS_ERR(hlcdc->sys_clk)) {
> + dev_err(dev, "failed to get functional clock\n");
Can you be more descriptive? This error message is the same as the
one above. How will a user know which one has failed?
> + return PTR_ERR(hlcdc->sys_clk);
> + }
> +
> + hlcdc->slow_clk = devm_clk_get(dev, "slow_clk");
> + if (IS_ERR(hlcdc->slow_clk)) {
> + dev_err(dev, "failed to get slow clock\n");
> + return PTR_ERR(hlcdc->slow_clk);
> + }
> +
> + memset(&config, 0, sizeof(config));
> + config.reg_bits = 32;
> + config.val_bits = 32;
> + config.reg_stride = 4;
> + config.max_register = (resource_size(res) / 4) - 1;
I'd prefer you did this as a separate struct, like everyone else
does.
> + hlcdc->regmap = devm_regmap_init_mmio_clk(dev, "periph_clk", regs,
> + &config);
> + if (IS_ERR(hlcdc->regmap))
> + return PTR_ERR(hlcdc->regmap);
> +
> + dev_set_drvdata(dev, hlcdc);
> +
> + return mfd_add_devices(dev, -1, atmel_hlcdc_cells,
> + ARRAY_SIZE(atmel_hlcdc_cells),
> + NULL, 0, NULL);
> +}
> +
> +static int atmel_hlcdc_remove(struct platform_device *pdev)
> +{
> + mfd_remove_devices(&pdev->dev);
> +
> + dev_set_drvdata(&pdev->dev, NULL);
This is done automatically for you - you can remove it.
> + return 0;
> +}
> +
> +static const struct of_device_id atmel_hlcdc_match[] = {
> + { .compatible = "atmel,sama5d3-hlcdc" },
> + { },
> +};
> +
> +static struct platform_driver atmel_hlcdc_driver = {
> + .probe = atmel_hlcdc_probe,
> + .remove = atmel_hlcdc_remove,
> + .driver = {
> + .name = "atmel-hlcdc",
> + .owner = THIS_MODULE,
> + .of_match_table = atmel_hlcdc_match,
Is this driver DT only?
> + },
> +};
> +module_platform_driver(atmel_hlcdc_driver);
> +
> +MODULE_ALIAS("platform:atmel-hlcdc");
> +MODULE_AUTHOR("Boris Brezillon <boris.brezillon at free-electrons.com>");
> +MODULE_DESCRIPTION("Atmel HLCDC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/atmel-hlcdc.h b/include/linux/mfd/atmel-hlcdc.h
> new file mode 100644
> index 0000000..d7a5589
> --- /dev/null
> +++ b/include/linux/mfd/atmel-hlcdc.h
> @@ -0,0 +1,78 @@
> +/*
> + * Copyright (C) 2014 Free Electrons
> + * Copyright (C) 2014 Atmel
> + *
> + * Author: Boris BREZILLON <boris.brezillon at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __LINUX_MFD_HLCDC_H
> +#define __LINUX_MFD_HLCDC_H
> +
> +#include <linux/clk.h>
> +#include <linux/regmap.h>
> +
> +#define ATMEL_HLCDC_CFG(i) ((i) * 0x4)
> +#define ATMEL_HLCDC_SIG_CFG LCDCFG(5)
> +#define ATMEL_HLCDC_HSPOL BIT(0)
> +#define ATMEL_HLCDC_VSPOL BIT(1)
> +#define ATMEL_HLCDC_VSPDLYS BIT(2)
> +#define ATMEL_HLCDC_VSPDLYE BIT(3)
> +#define ATMEL_HLCDC_DISPPOL BIT(4)
> +#define ATMEL_HLCDC_DITHER BIT(6)
> +#define ATMEL_HLCDC_DISPDLY BIT(7)
> +#define ATMEL_HLCDC_MODE_MASK 0x300
> +#define ATMEL_HLCDC_PP BIT(10)
> +#define ATMEL_HLCDC_VSPSU BIT(12)
> +#define ATMEL_HLCDC_VSPHO BIT(13)
> +#define ATMEL_HLCDC_GUARDTIME_MASK 0x1f0000
There should only be one space after '#define'.
> +#define ATMEL_HLCDC_EN 0x20
> +#define ATMEL_HLCDC_DIS 0x24
> +#define ATMEL_HLCDC_SR 0x28
> +#define ATMEL_HLCDC_IER 0x2c
> +#define ATMEL_HLCDC_IDR 0x30
> +#define ATMEL_HLCDC_IMR 0x34
> +#define ATMEL_HLCDC_ISR 0x38
> +
> +#define ATMEL_HLCDC_CLKPOL BIT(0)
> +#define ATMEL_HLCDC_CLKSEL BIT(2)
> +#define ATMEL_HLCDC_CLKPWMSEL BIT(3)
> +#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i))
> +#define ATMEL_HLCDC_CLKDIV_SHFT 16
> +#define ATMEL_HLCDC_CLKDIV_MASK (0xff << ATMEL_HLCDC_CLKDIV_SHFT)
> +#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT)
> +
> +#define ATMEL_HLCDC_PIXEL_CLK BIT(0)
> +#define ATMEL_HLCDC_SYNC BIT(1)
> +#define ATMEL_HLCDC_DISP BIT(2)
> +#define ATMEL_HLCDC_PWM BIT(3)
> +#define ATMEL_HLCDC_SIP BIT(4)
> +
> +/**
> + * Structure shared by the MFD device and its subdevices.
> + *
> + * @regmap: register map used to access HLCDC IP registers
> + * @periph_clk: the hlcdc peripheral clock
> + * @sys_clk: the hlcdc system clock
> + * @slow_clk: the system slow clk
> + */
> +struct atmel_hlcdc {
> + struct regmap *regmap;
> + struct clk *periph_clk;
> + struct clk *sys_clk;
> + struct clk *slow_clk;
> +};
> +
> +#endif /* __LINUX_MFD_HLCDC_H */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the dri-devel
mailing list