[RFC PATCH 1/4] memory: tegra124-emc: Add EMC driver

Mikko Perttunen mikko.perttunen at kapsi.fi
Mon Jun 16 07:03:30 PDT 2014


It should be mentioned that calling clk_set_rate on the EMC clock 
currently does absolutely nothing (except probably returning an error). 
The rate switching sequence is not implemented (nor is the clock tree 
entirely correct. For example, the kernel thinks that PLL_M is disabled).

Another note: I am currently implementing an actmon driver. I'm not 
entirely enthusiastic about the downstream style of managing EMC rate 
policy in the actmon driver, but haven't yet given much thought to it.

Yet another note: I think the exported API should not be SoC-specific, 
so s/tegra124_/tegra_/.

Thanks,
- Mikko

On 06/16/2014 04:35 PM, Tomeu Vizoso wrote:
> Adds functionality for registering memory bandwidth needs and setting
> the EMC clock rate based on that.
>
> Also adds API for setting floor and ceiling frequency rates.
>
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso at collabora.com>
> ---
>   .../bindings/arm/tegra/nvidia,tegra124-emc.txt     |  26 ++++
>   drivers/memory/Kconfig                             |   8 +
>   drivers/memory/Makefile                            |   1 +
>   drivers/memory/tegra124-emc.c                      | 173 +++++++++++++++++++++
>   include/linux/platform_data/tegra_emc.h            |  23 +++
>   5 files changed, 231 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra124-emc.txt
>   create mode 100644 drivers/memory/tegra124-emc.c
>
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra124-emc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra124-emc.txt
> new file mode 100644
> index 0000000..88e6a55
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra124-emc.txt
> @@ -0,0 +1,26 @@
> +Tegra124 External Memory Controller
> +
> +Properties:
> +- compatible : Should contain "nvidia,tegra124-emc".
> +- reg : Should contain the register range of the device
> +- #address-cells : Should be 1
> +- #size-cells : Should be 0
> +- nvidia,mc : phandle to the mc bus connected to EMC.
> +- clocks : phandle to EMC, EMC shared bus override, and all parent clocks.
> +- clock-names : name of each clock.
> +- nvidia,pmc : phandle to the PMC syscon node.
> +- max-clock-frequency : optional, specifies the maximum EMC rate in kHz.
> +
> +Child device nodes describe the memory settings for different configurations and
> +clock rates.
> +
> +Example:
> +
> +	memory-controller at 7001b000 {
> +		compatible = "nvidia,tegra124-emc";
> +		reg = <0x7001b000 0x1000>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		clocks = <&tegra_car TEGRA124_CLK_EMC>;
> +		clock-names = "emc";
> +	};
> diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
> index c59e9c9..48fa0dd 100644
> --- a/drivers/memory/Kconfig
> +++ b/drivers/memory/Kconfig
> @@ -61,6 +61,14 @@ config TEGRA30_MC
>   	  analysis, especially for IOMMU/SMMU(System Memory Management
>   	  Unit) module.
>
> +config TEGRA124_EMC
> +	tristate "Tegra124 External Memory Controller (EMC) driver"
> +	default y
> +	depends on ARCH_TEGRA_124_SOC
> +	help
> +	  This driver is for the External Memory Controller (EMC) module
> +	  available in Tegra124 SoCs.
> +
>   config FSL_IFC
>   	bool
>   	depends on FSL_SOC
> diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile
> index 71160a2..0b7290b 100644
> --- a/drivers/memory/Makefile
> +++ b/drivers/memory/Makefile
> @@ -11,3 +11,4 @@ obj-$(CONFIG_FSL_IFC)		+= fsl_ifc.o
>   obj-$(CONFIG_MVEBU_DEVBUS)	+= mvebu-devbus.o
>   obj-$(CONFIG_TEGRA20_MC)	+= tegra20-mc.o
>   obj-$(CONFIG_TEGRA30_MC)	+= tegra30-mc.o
> +obj-$(CONFIG_TEGRA124_EMC)	+= tegra124-emc.o
> diff --git a/drivers/memory/tegra124-emc.c b/drivers/memory/tegra124-emc.c
> new file mode 100644
> index 0000000..b7a54a5
> --- /dev/null
> +++ b/drivers/memory/tegra124-emc.c
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/clk.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_data/tegra_emc.h>
> +
> +#define DRV_NAME "tegra124-emc"
> +#define EMC_FREQ_CUTOFF_USE_130_PERCENT	100000000
> +#define EMC_FREQ_CUTOFF_USE_140_PERCENT	50000000
> +#define BYTES_PER_EMC_CLOCK 16
> +
> +struct tegra124_emc {
> +	struct clk *clk;
> +	unsigned long bandwidth_requests[TEGRA_EMC_CONSUMER_LAST];
> +	unsigned long floor_freq;
> +	unsigned long ceiling_freq;
> +	/*
> +	 * Cannot use a mutex here because the ACTMON driver would set a floor
> +	 * frequency from an IRQ handler.
> +	 */
> +	spinlock_t spinlock;
> +};
> +
> +static struct platform_device *emc_pdev;
> +
> +static unsigned long tegra124_emc_bw_to_freq_req(unsigned long bw)
> +{
> +	return (bw + BYTES_PER_EMC_CLOCK - 1) / BYTES_PER_EMC_CLOCK;
> +}
> +
> +static void tegra124_emc_update_rate(struct tegra124_emc *emc)
> +{
> +	int i;
> +	struct clk *emc_master;
> +	unsigned long total_bandwidth = 0;
> +	unsigned long freq;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&emc->spinlock, flags);
> +
> +	for (i = 0; i < TEGRA_EMC_CONSUMER_LAST; i++)
> +		total_bandwidth += emc->bandwidth_requests[i];
> +
> +	emc_master = clk_get_parent(emc->clk);
> +	freq = tegra124_emc_bw_to_freq_req(total_bandwidth) * 1000;
> +	freq = clk_round_rate(emc_master, freq);
> +
> +	/* XXX: Add safety margins for DVFS */
> +
> +	if (freq < EMC_FREQ_CUTOFF_USE_140_PERCENT)
> +		total_bandwidth += 4 * total_bandwidth / 10;
> +	else if (freq < EMC_FREQ_CUTOFF_USE_130_PERCENT)
> +		total_bandwidth += 3 * total_bandwidth / 10;
> +	else
> +		total_bandwidth += total_bandwidth / 10;
> +
> +	freq = tegra124_emc_bw_to_freq_req(total_bandwidth) * 1000;
> +	freq = max(freq, emc->floor_freq);
> +	freq = min(freq, emc->ceiling_freq);
> +
> +	spin_unlock_irqrestore(&emc->spinlock, flags);
> +
> +
> +	clk_set_rate(emc->clk, freq);
> +}
> +
> +int tegra124_emc_reserve_bandwidth(unsigned int consumer, unsigned long rate)
> +{
> +	struct tegra124_emc *emc = platform_get_drvdata(emc_pdev);
> +	unsigned long flags;
> +
> +	if (consumer >= TEGRA_EMC_CONSUMER_LAST) {
> +		dev_err(&emc_pdev->dev, "Invalid EMC consumer ID (%u)\n", consumer);
> +		return -EINVAL;
> +	}
> +
> +	spin_lock_irqsave(&emc->spinlock, flags);
> +	emc->bandwidth_requests[consumer] = rate;
> +	spin_unlock_irqrestore(&emc->spinlock, flags);
> +
> +	tegra124_emc_update_rate(emc);
> +
> +	return 0;
> +}
> +
> +void tegra124_emc_set_floor(unsigned long freq)
> +{
> +	struct tegra124_emc *emc = platform_get_drvdata(emc_pdev);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&emc->spinlock, flags);
> +	emc->floor_freq = freq;
> +	spin_unlock_irqrestore(&emc->spinlock, flags);
> +
> +	tegra124_emc_update_rate(emc);
> +}
> +
> +void tegra124_emc_set_ceiling(unsigned long freq)
> +{
> +	struct tegra124_emc *emc = platform_get_drvdata(emc_pdev);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&emc->spinlock, flags);
> +	emc->ceiling_freq = freq;
> +	spin_unlock_irqrestore(&emc->spinlock, flags);
> +
> +	tegra124_emc_update_rate(emc);
> +}
> +
> +static int tegra124_emc_probe(struct platform_device *pdev)
> +{
> +	struct tegra124_emc *emc;
> +
> +	emc_pdev = pdev;
> +
> +	emc = devm_kzalloc(&pdev->dev, sizeof(*emc), GFP_KERNEL);
> +	if (emc == NULL) {
> +		dev_err(&pdev->dev, "Failed to allocate private memory\n");
> +		return -ENOMEM;
> +	}
> +
> +	emc->ceiling_freq = ULONG_MAX;
> +
> +	emc->clk = devm_clk_get(&pdev->dev, "emc");
> +	if (IS_ERR(emc->clk)) {
> +		devm_kfree(&pdev->dev, emc);
> +		dev_err(&pdev->dev, "Can not find EMC clock\n");
> +		return -EINVAL;
> +	}
> +
> +	spin_lock_init(&emc->spinlock);
> +
> +	platform_set_drvdata(emc_pdev, emc);
> +
> +	return 0;
> +}
> +
> +static struct of_device_id tegra124_emc_of_match[] = {
> +	{ .compatible = "nvidia,tegra124-emc", },
> +	{ },
> +};
> +
> +static struct platform_driver tegra124_emc_driver = {
> +	.driver         = {
> +		.name   = DRV_NAME,
> +		.owner  = THIS_MODULE,
> +		.of_match_table = tegra124_emc_of_match,
> +	},
> +	.probe          = tegra124_emc_probe,
> +};
> +
> +module_platform_driver(tegra124_emc_driver);
> +
> +MODULE_AUTHOR("Tomeu Vizoso <tomeu.vizoso at collabora.com>");
> +MODULE_DESCRIPTION("Tegra124 EMC driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:" DRV_NAME);
> diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h
> index df67505..2967964 100644
> --- a/include/linux/platform_data/tegra_emc.h
> +++ b/include/linux/platform_data/tegra_emc.h
> @@ -31,4 +31,27 @@ struct tegra_emc_pdata {
>   	struct tegra_emc_table *tables;
>   };
>
> +enum {
> +	TEGRA_EMC_CONSUMER_DISP1 = 0,
> +	TEGRA_EMC_CONSUMER_DISP2,
> +	TEGRA_EMC_CONSUMER_MSENC,
> +	TEGRA_EMC_CONSUMER_CAMERA,
> +	TEGRA_EMC_CONSUMER_AVP,
> +	TEGRA_EMC_CONSUMER_ISO,
> +	TEGRA_EMC_CONSUMER_LAST
> +};
> +
> +#ifdef CONFIG_TEGRA124_EMC
> +int tegra124_emc_reserve_bandwidth(unsigned int consumer, unsigned long rate);
> +void tegra124_emc_set_floor(unsigned long freq);
> +void tegra124_emc_set_ceiling(unsigned long freq);
> +#else
> +int tegra124_emc_reserve_bandwidth(unsigned int consumer, unsigned long rate)
> +{ return -ENODEV; }
> +void tegra124_emc_set_floor(unsigned long freq)
> +{ return; }
> +void tegra124_emc_set_ceiling(unsigned long freq)
> +{ return; }
> +#endif
> +
>   #endif
>



More information about the dri-devel mailing list