[PATCH 2/2] drm/radeon: improve dvi_mode_valid

[Alex Deucher]

Make sure we have an HDMI monitor before validating modes with
clocks >165 Mhz on single link connections.

Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index cfb2c8f..1b9177e 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -1288,17 +1288,15 @@ static int radeon_dvi_mode_valid(struct drm_connector *connector,
 		    (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) ||
 		    (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B))
 			return MODE_OK;
-		else if (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_A) {
-			if (ASIC_IS_DCE6(rdev)) {
-				/* HDMI 1.3+ supports max clock of 340 Mhz */
-				if (mode->clock > 340000)
-					return MODE_CLOCK_HIGH;
-				else
-					return MODE_OK;
-			} else
+		else if (ASIC_IS_DCE6(rdev) && drm_detect_hdmi_monitor(radeon_connector->edid)) {
+			/* HDMI 1.3+ supports max clock of 340 Mhz */
+			if (mode->clock > 340000)
 				return MODE_CLOCK_HIGH;
-		} else
+			else
+				return MODE_OK;
+		} else {
 			return MODE_CLOCK_HIGH;
+		}
 	}
 
 	/* check against the max pixel clock */
-- 
1.8.3.1