[PATCH] drm/radeon: adjust default dispclk on DCE6

[Alex Deucher]

Set the default to 600Mhz if it's not set in the bios,
and bump the default to 600Mhz if it's lower than that.

This fixes display issues with certain 4k DP monitors when
using 5.4 Ghz DP clocks.

Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/radeon/radeon_atombios.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 3084481..c08629e 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1227,11 +1227,19 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
 			rdev->clock.default_dispclk =
 				le32_to_cpu(firmware_info->info_21.ulDefaultDispEngineClkFreq);
 			if (rdev->clock.default_dispclk == 0) {
-				if (ASIC_IS_DCE5(rdev))
+				if (ASIC_IS_DCE6(rdev))
+					rdev->clock.default_dispclk = 60000; /* 600 Mhz */
+				else if (ASIC_IS_DCE5(rdev))
 					rdev->clock.default_dispclk = 54000; /* 540 Mhz */
 				else
 					rdev->clock.default_dispclk = 60000; /* 600 Mhz */
 			}
+			/* set a reasonable default for DP */
+			if (ASIC_IS_DCE6(rdev) && (rdev->clock.default_dispclk < 53900)) {
+				DRM_INFO("Changing default dispclk from %dMhz to 600Mhz\n",
+					 rdev->clock.default_dispclk);
+				rdev->clock.default_dispclk = 60000;
+			}
 			rdev->clock.dp_extclk =
 				le16_to_cpu(firmware_info->info_21.usUniphyDPModeExtClkFreq);
 			rdev->clock.current_dispclk = rdev->clock.default_dispclk;
-- 
1.8.3.1